Legamaster EXP-8610 AR Explore 2 Touch Monitor Instruction Manual

: June 1, 2024
: Legamaster

Table of Contents

Legamaster EXP-8610 AR Explore 2 Touch Monitor
Product Information
FAQ
IMPORTANT INFORMATION
SAFETY INSTRUCTIONS
INSTALLATION
WARRANTY DETAILS
PACKAGE CONTENT / INSTALLATION
INCLUDED ACCESORIES
OVERVIEW
OPERATING THE SCREEN
TROUBLESHOOTING
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Legamaster EXP-8610 AR Explore 2 Touch Monitor

Legamaster-EXP-8610-AR-Explore-2-Touch-Monitor-PRODUCT

Product Information

Specifications

Product: Touch Monitor
Languages: English, Deutsch, Nederlands
User Manual Version: 1.0

FAQ

Q: How should I clean the touch monitor?

A: Use a soft, dry cloth to gently clean the screen surface. Avoid using any harsh chemicals or abrasive materials that may damage the monitor.

Q: What should I do if the touch monitor is not responding to touch?

A: Ensure that the monitor is properly connected to the computer or device. If issues persist, restart both the monitor and the connected device to reset the connection.

IMPORTANT INFORMATION

WARNING: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. Also, DO NOT USE THIS UNIT‘S POLARIZED PLUG WITH AN EXTENSION CORD RECEPTABLE OR OTHER OUTLETS UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN FROM OPENING THE SCREEN’S HOUSING AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, MAKE SURE THE POWER CORD IS UNPLUGGED FROM WALL SOCKET. TO FULLY DISENGAGE THE POWER TO THE UNIT, PLEASE DISCONNECT THE POWER CORD FROM THE AC OUTLET. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE.
WARNING: FOR CONTINUED SAFETY, DEVICES WITH CLASS I CONSTRUCTION SHALL BE CONNECTED TO A MAIN SOCKET OUTLET WITH A PROTECTIVE EARTHING CONNECTION.
WARNING: THIS IS A CLASS A PRODUCT MEANT TO BE USED IN PROFESSIONAL ENVIRONMENTS. – THIS PRODUCT MUST NOT BE USED IN RESIDENTIAL AREAS.

USE

Transport the product upright with proper packaging. Avoid placing the product face up or down. Handle with care!
Do not send a static (non-moving) image to the screen, it may cause image ‘burn-in’ or image retention.
“Burn in” and/or image retention is not covered under warranty.
Make sure to change the image on the screen periodically. It is recommended to turn off the e-screen for at least 6 hours after 16 hours of usage in a 24-hour period to help avoid image retention.

SAFETY INSTRUCTIONS

EXEMPTIONS

This product isn’t warranted for any damage caused by natural disasters (such as earthquakes, thunder, etc.), fire, acts by third parties, accidents, owner’s intentional misuse and fault, or use in other improper conditions.
This product isn’t warranted for incidental damages (such as profit loss or interruption in business, modification or erasure of record data, etc.) caused by use or inability to use of this product.
This product isn’t warranted for any damage caused by inappropriate operation, or from not following the user manual.
This product isn’t warranted for any damage caused by misuse or malfunction through simultaneous use of this product and the connected equipment or software.
This product isn’t warranted for any damage caused by neglect of the installation instructions.
This product isn’t warranted for any damage caused by improper installation.
This product isn’t warranted for any damage caused by disassembly, modification or repair by non-authorized service centres or people.

SAFETY INSTRUCTIONS

Before using this screen, please read this user manual thoroughly to help protect against property damage and to ensure your personal safety and the safety of others.

Read and follow all instructions and safety warnings found in this manual.
For installation or adjustment, please follow the instructions in this manual and refer all servicing to qualified service personnel.

SAFETY PRECAUTIONS

If smoke or a peculiar smell comes from the Screen, remove the power plug from the outlet immediately. Failure to do so may result in fire or electrical shock.
Contact your dealer for inspection.
If the Screen has been turned on but there is no picture, remove the power plug from the outlet immediately. Failure to do so may result in fire or electrical shock.
Contact your dealer for inspection.
If water is spilled or objects are dropped inside the Screen, remove the power plug from the outlet immediately. Failure to do so may result in fire or electrical shock.
Contact your dealer for inspection.
If the Screen is dropped or the screen‘s housing is damaged, remove the power plug from the outlet immediately. Failure to do so may result in fire or electrical shock.
Contact your dealer for inspection.
If the power cord or plug is damaged or becomes hot, turn off the main power switch of the Screen, make sure the power plug has cooled down and remove the power plug from the outlet.
If the Screen is still used in this condition, it may cause fire or electrical shock. Contact your dealer for replacement.

MOVING AND CARRYING NOTICE

Moving the product
Moving the product may require up to four people. Attempting to move the product with fewer people may result in damage to the product or in serious injury of the people handling the screen. When moving a display in its shipping carton, lift the carton using the white handles.

Carrying the product
This product is heavy; please follow proper lifting techniques, as pictured below. Failure to do so may cause injury.

Legamaster-EXP-8610-AR-Explore-2-Touch-Monitor-FIG-2

INSTALLATION

Don‘t install in a high-temperature environment.
If the screen is used in high temperatures or in direct sunlight, it may cause the housing of the product or other parts to become distorted or damaged, resulting in overheating or electrical shock.
Don‘t install in a high-humidity environment.
This may cause overheating or electrical shock.
Don‘t install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
This may cause fire or electrical shock.
Don‘t overload outlets or cables beyond electrical capacity. Don‘t use extension cords as they may cause fire or electrical shock.
Don‘t insert the power plug into an outlet other than 100~240V AC.
This may cause fire or electrical shock.
Don’t use a damaged power plug or worn outlet.
Don’t insert an improper power plug it may cause fire or electric shock.
Don‘t place the screen on an unstable shelf or surface. The screen may fall, causing injury. Please install it on a horizontal, stable, level surface.
Don‘t place objects on the e-screen.
If the screen is covered or the vents are blocked, the display could overheat and cause a fire.
If objects or liquids get inside the screen, this may cause fire or electrical shock.
Do not put heavy objects on the screen as they may fall, causing injury.
Please keep a 10 cm minimum distance between the screen, wall and/or other objects to ensure sufficient ventilation.
Don‘t move the screen when it is connected to the power cord and AV cables.
When moving the e-screen, make sure to remove all cables first.
When unpacking or carrying the screen, up to 4 people might be needed. Make sure the screen is carried upright.
Transport the screen upright. Avoid placing the e-screen face-up or down.
Handle the screen gently. Do not drop.

WALLMOUNT SAFETY NOTICE

Please make sure that the bracket is mounted on a solid surface.
After mounting the screen, do not pull, push or shake the screen.

Legamaster-EXP-8610-AR-Explore-2-Touch-Monitor-FIG-4

SAFETY INSTRUCTIONS

Do not install screens in direct sunlight, humid conditions, or high temperatures.

Legamaster-EXP-8610-AR-Explore-2-Touch-Monitor-FIG-5

RECOMMENDED USE
If you encounter a problem during installation, please contact your supplier for assistance. Don’t repair or open the screen by yourself. Failure to do so may result in fire or electrical shock.
Contact your dealer for inspection.
Protect and correctly use the power cord/plug

Don‘t pinch the power cord/plug between hard surfaces.
Don‘t step on the power cord/plug.
Before inserting the power plug into the wall outlet, connect the power cord to the display.
Using a screen with a damaged or non-original power cord can damage the screen, and cause fires or electrical shocks.

Using extension cords (not recommended)

If an extension cord must be used, ensure the voltage rating exceeds the maximum power consumption of the display. If the voltage rating is less than the display, it will cause the extension cord to overheat.
Do not operate the screen during thunder or lightning.
Remove the power plug from the power outlet.

SAFETY INSTRUCTIONS

Don’t use any kind of liquid on the screen.
If liquid is spilled on the screen, remove the power plug from the wall socket and ask qualified service personnel to check the product.
If liquid gets on the screen’s glass plate, clean it with a dry and soft cloth immediately.
Don’t use any chemicals on the screen.
If metal or liquids get into the screen, it may cause a fire or an electrical shock.
Don’t install or remove the power plug with wet hands. This may cause an electrical shock.
If the screen will not be used for a long period, unplug the display. Preventing to do so may cause premature wear of electrical components or fire.
Handle the screen with care, and prevent glass breakage.
If the glass of the screen is broken, liquids may escape. Please don‘t touch the liquid.
If these liquids come into contact with skin or eyes, immediately wash it away with clean water and consult a medical professional.
Precautions with the remote-control batteries
Please only use approved AAA-type batteries.
Please be sure to insert batteries by matching the + and -.
Don’t recharge, heat, disassemble, short or throw batteries into a fire.
Don’t mix a new battery with a used one.
Don’t mix different types of batteries (only use the specified type).

CLEANING

Remove the power plug from the power outlet before cleaning.
Failure to do so may result in electrical shock or damage.
Cleaning the surface of the screen
When the surface of the screen becomes dirty, wipe the surface lightly with a soft, clean cloth.
If the surface requires additional cleaning, lightly moisten the cloth.
Do not to let any kind of liquid enter the screen as it may cause electrical shock or damage.
Do not clean the screen with alcohol, solvents or ammonia, as this could damage the e-screen.

WARRANTY DETAILS

Legamaster-EXP-8610-AR-Explore-2-Touch-Monitor-FIG-6 STANDARD WARRANTY A
Legamaster guarantees ‘on-site’ repair of the product for 3 years. When necessary and at the discretion of Legamaster International B.V., a defective unit can be replaced by a similar – functioning – unit in at least the same condition, whereas the remainder of the original warranty period will be transferred to the replacement unit.
Replacement parts used in repairing a defective product are warranted to be free from defects and to remain so during the remainder of the original warranty period of the product. Replacement parts do not prolong the warranty period of the product.

STANDARD WARRANTY B

In years 4 and 5 of the lifetime of the product (calculated from the date of purchase as mentioned on the invoice) Legamaster International B.V. offers an additional 2-year warranty period on parts and/or components, excluding the panel of the product.
During these 3 years, the following conditions apply:
In years 4 and 5 Legamaster International B.V. guarantees the replacement of defective parts and/or components of the product, excluding the panel of the product. Legamaster B.V. will offer the end-user a replacement component for the defective component that is warranted to be free from defects and to remain so for the remainder of the warranty period of the product. Replacement parts do not prolong the warranty period of the product.
During this warranty period, If needed, Legamaster International B.V. will assist the end-user in repairing the defective unit, either on-site or when needed at our service department in Lochem, Netherlands. The end-user will be charged – after consultation with the end-user – a service fee of which amount is dependent on the labour time and travelling distance needed to perform the mentioned repair.
When necessary and at the discretion of Legamaster International B.V., a defective unit can be replaced by a similar – functioning – unit in at least the same condition, whereas the remainder of the original warranty period will be transferred to the replacement unit.

ADDITIONAL WARRANTY
On applicable products sold in applicable markets, Legamaster B.V. can offer an additional warranty option, as specified under ‘Additional Warranty C’ and Additional Warranty B’. Please head over to legamaster.com/service/warranty for more information about our warranty details.

Legamaster-EXP-8610-AR-Explore-2-Touch-Monitor-FIG-7

PACKAGE CONTENT / INSTALLATION

PACKAGE CONTENT
UNPACKING

The Touch Monitor is packed using cushions to protect the product during shipping.
Before unpacking, prepare a stable, level, and clean surface near a wall outlet.
Step 1: Place the box in an upright stable position.
Step 2: Remove the white handles and cut the banding
Step 3: Smoothly lift the upper part of the box, this will reveal the Touch Monitor box content
Step 4: Remove the top cushion and take the accessory bag out.
Step 5: Extend the bag up and carefully cut the upper layer to unseal the Touch Monitor
Step 6: Prepare your screen for installation, and then remove it from the box by lifting it.

INCLUDED ACCESORIES

ITEMS

Power Cord 1.8m
Remote Control
ECO-Stylus + Pen holder

INSTALLATION
ENVIROMENT CONDITIONS
When operating the screen, ambient room conditions should not exceed the following:

Operating temperature: 0˚C to 40˚C (32˚F to 104˚F)
Humidity: less than 90% RH (Max)

OVERVIEW

GENERAL OVERVIEW OF THE SCREEN

Legamaster-EXP-8610-AR-Explore-2-Touch-Monitor-FIG-8

INPUT / OUTPUT CONNECTOR INFORMATION

USB-A 2.0 (x1) / USB-A 3.0 (x5)
USB-B 2.0 (x2) (Touch)
HDMI 2.0 (x3)
USB-C 3.1 (x1) (DP 1.2 + 65W)
Minijack 3,5 Stereo (x1 in + x1 Out)
RS-232 (Serial)

REMOTE CONTROL

Turn the display ON and OFF.
Home: Direct connection to PC input.
Source Selection Displays the input selection screen to select from
Navigation Buttons Easy navigation wheel
Select / Confirm: Confirm your on-screen selection.
Back / Return to previous MENU Returns to the previously selected on-screen MENU.
Volume Down Lowers the audio volume.
Volume Up Raises the audio volume.
Settings MENU Direct access to the main settings MENU
Mute mutes the scree’s audio

Legamaster-EXP-8610-AR-Explore-2-Touch-Monitor-FIG-10

OVERVIEW / OPERATING THE SCREEN
CHANGING THE REMOTE-CONTROL BATTERY

Remove the battery cover

On the backside of the remote control, slide down the battery cover.

Insert batteries

Use two AAA batteries and insert them according to the plus and minus indicators in the remote control.

Close the battery cover by sliding it back into place

Discard batteries according to the local waste reduction and recovery regulations.
Do not keep used, empty batteries in the remote control. They can leak and result in damage to the remote control.
Only use batteries according to the instructions and regulations found in this manual and to the instructions and regulations set forth by the battery’s manufacturer.

About the remote control

Do not drop, shake, or bump.
Avoid moist conditions, liquids, high temperatures and/or exposure to direct sunlight.
Don‘t dismantle.

TURNING THE DISPLAY ON AND OFF

Please make sure the display is connected to an AC power socket using the supplied power cable.
Set the AC switch to “l “. The Touch Monitor will start up, if not.
To switch the display on, push the power button on the screen once, or push the power button on the remote control.
To switch the display off, press the power button on the screen, or push the power button on the remote control. The display will switch to stand-by mode.
To turn off the power completely, turn the AC switch to “O “or disconnect the AC power cord from the power outlet.

OPERATING THE SCREEN

SETTINGS MENU

Main Settings| Setting category| Level1| Level2| Explanation
---|---|---|---|---

PICTURE

|

Energy mode

Auto

|

ON/OFF

|

Energy consumption Automatic

Dynamic

|

ON/OFF

|

Energy consumption Dynamic

Normal| ON/OFF| Energy consumption Normal

Zoom mode

| 16:09| ON/OFF| Aspect ratio 16:9
P2P: Pixel-to- Pixel|

ON/OFF

|

Aspect ratio P2P

Picture mode

|

Vivid

|

ON/OFF

|

Pictures vivid displayed

Standard

|

ON/OFF

|

Pictures standard displayed

Soft

|

ON/OFF

|

Pictures soft displayed

User| ON/OFF| Pictures vivid displayed

Personalize

|

0-100

| Personalize the contrast, brightness, saturation and sharpness of the picture

Color profile

| Cool| ON/OFF| Color profile cool
Standard| ON/OFF| Color profile standard
Warm| ON/OFF| Color profile warm
Backlight| | 0-100| Adjust backlighting
Bluelight filter| | ON/OFF| Bluelight filter on/off
Main Settings| Setting category| Level1| Level2| Explanation
---|---|---|---|---

SOUND

|

Sound mode

|

Standard

|

ON/OFF

| Sound mode on standard

experience

Music

|

ON/OFF