OneSpan FX1 Digipass Bio Protects Against Social User Manual

OneSpan FX1 Digipass Bio Protects Against Social

Product Information

Specifications

• Model: DIGIPASS FX1 BIO
• Version: 2023-09-28
• Trademark: OneSpan

Product Overview

The DIGIPASS FX1 BIO is a multifunctional authenticator device that provides secure access using PIN protection and a fingerprint sensor. It features LED indicators for status notifications and can be charged via USB-C cable.

Technical Specifications

The device comes with the following technical specifications:

• Bluetooth connectivity
• Fingerprint sensor for biometric authentication
• Rechargeable battery
• USB-C charging port
• Compatibility with FIDO authentication

Safety Notice

Refer to the safety notice section in the user manual for important safety information and regulatory compliance details.

Product Usage Instructions

1. Device Overview

The DIGIPASS FX1 BIO device includes a fingerprint sensor, LED indicators, and a PIN protection feature. Familiarize yourself with the various components of the device as described in the user manual.

2. Getting Started

Begin by setting up the device following the initial steps outlined in the user manual. This includes authenticator setup and familiarizing yourself with its usage.

3. FIDO Authentication

Learn how to utilize FIDO authentication with the DIGIPASS FX1 BIO device by following the instructions provided in the user manual.

4. Manage the Authenticator

Manage Bluetooth settings, change PIN, manage fingerprints, remove FIDO credentials, and reset the authenticator as needed by referring to the relevant sections in the user manual.

FAQs

• Q: What should I do if I encounter issues with my DIGIPASS FX1 BIO device?
  • A: If you experience any difficulties with your device, refer to the technical support and knowledge base provided on the OneSpan website. If no solution is found, contact the supplier of the device for further assistance.

DIGIPASS FX1 BIO
User Manual
Version: 2023-09-28

Copyright Notice
Copyright © 2023 OneSpan North America, Inc. All rights reserved.
Trademarks
OneSpanTM, DIGIPASS® and CRONTO® are registered or unregistered trademarks of OneSpan North America Inc., OneSpan NV and/or OneSpan International GmbH (collectively “OneSpan”) in the U.S. and other countries.
OneSpan reserves all rights to the trademarks, service marks and logos of OneSpan and its subsidiaries.
All other trademarks or trade names are the property of their respective owners.
Intellectual Property
OneSpan Software, documents and related materials (“Materials”) contain proprietary and confidential information. All title, rights and interest in OneSpan Software and Materials, updates and upgrades thereof, including software rights, copyrights, patent rights, industrial design rights, trade secret rights, sui generis database rights, and all other intellectual and industrial property rights, vest exclusively in OneSpan or its licensors. No OneSpan Software or Materials may be downloaded, copied, transferred, disclosed, reproduced, redistributed, or transmitted in any form or by any means, electronic, mechanical or otherwise, for any commercial or production purpose, except as otherwise marked or when expressly permitted by OneSpan in writing.
Disclaimer
OneSpan accepts no liability for the accuracy, completeness, or timeliness of content, or for the reliability of links to and content of external or third party websites.
OneSpan shall have no liability under any circumstances for any loss, damage, or expense incurred by you, your company, or any third party arising from the use or inability to use OneSpan Software or Materials, or any third party material made available or downloadable. OneSpan will not be liable in relation to any loss/damage caused by modification of these Legal Notices or content.
Reservation
OneSpan reserves the right to modify these Notices and the content at any time. OneSpan likewise reserves the right to withdraw or revoke consent or otherwise prohibit use of the OneSpan Software or Materials if such use does not conform to the terms of any written agreement between OneSpan and you, or other applicable terms that OneSpan publishes from time to time.
Contact us
Visit our website: https://www.onespan.com Resource center: https://www.onespan.com/resource-center Technical support and knowledge base: https://www.onespan.com/support
If there is no solution in the knowledge base, contact the company that supplied you with the OneSpan product.
Date: 2023-09-28

Product Overview

1

Welcome to the DIGIPASS FX1 BIO User Manual! DIGIPASS FX1 BIO is a phishing- resistant authenticator that works out-of-the-box with hundreds of FIDO2­ enabled services.
The FIDO Alliance develops standards for passwordless authentication. With FIDO (Fast IDentity Online), user authentication does not rely on static passwords or onetime passwords. Instead, users are authenticated via biometrics and FIDO­compliant authenticators.
The DIGIPASS FX1 BIO authenticator works in connected mode via USB, Bluetooth LE (BLE), or NFC.

1.1 Device overview

2

1.2 PIN protection

4

1.3 Fingerprint sensor

5

1.4 LED indicators

7

1.5 Charge the battery

9

1 Product overview DIGIPASS FX1 BIO User Manual

1

1.1 Device overview
1.1.1 Authenticator front
Figure 1: Authenticator front 1 Power button/Bluetooth pairing mode button 2 Foldable USB-C cable 3 LED indicators 4 Fingerprint sensor
1.1.2 Authenticator back
Regulatory identifiers are printed on the back of the authenticator.

1 Product overview DIGIPASS FX1 BIO User Manual

2

Figure 2: Authenticator back
1.1.3 USB cable manipulation
The USB cable can be folded at the back of the authenticator, thanks to a magnetic mechanism. You do not need a separate USB cable for USB-connected operations.

Figure 3: USB-C cable
To unclip the USB cable, lift the metallic part of the USB plug to release the magnet (1), or pull the cable at the tip of the plastic cap (2).
CAUTION: To ensure maximum longevity, do not twist or fold the cable at sharp
angles, since this can damage the cable. Do not hold the authenticator’s main body to pull the USB cable. Pull the authenticator by holding the plastic plug.

1 Product overview DIGIPASS FX1 BIO User Manual

3

1.2 PIN protection
The DIGIPASS FX1 BIO authenticator performs user verification primarily by fingerprint, and by PIN as a fall-back method.
Since the DIGIPASS FX1 BIO authenticator has no keypad, the PIN is entered on the device to which the authenticator is connected (typically a PC or a smartphone).
The PIN is composed of alphanumeric characters and must comply with the following rules:
l Minimum length: 4 decimal digits or 4 characters
l Maximum length: 63 bytes in UTF-8 representation. This corresponds to 63 characters if only standard ASCII characters are used, but corresponds to fewer characters if special characters are used (e.g. accented, Chinese,…).
NOTE: After 3 consecutive incorrect PIN attempts, the authenticator must be turned
off and restarted before a new PIN attempt can be made. In case of a USB connection, this is done by removing and re-inserting the USB cable. In case of BLE or NFC communication, this is done by either explicitly turning off the authenticator with the Power button, or letting the device turn off automatically via time-out, and then turning it on again.
CAUTION: After a total of 8 consecutive incorrect PIN attempts, the authenticator is
locked. The authenticator must be reset, which effectively removes all data (credentials, accounts, fingerprint, PIN) and reverts the authenticator to factory settings.

1 Product overview DIGIPASS FX1 BIO User Manual

4

1.3 Fingerprint sensor
The fingerprint sensor is used to verify the user. The sensor is a 360° sensor and recognizes a fingerprint in any orientation. There are two verification modes:
l Touch only. In this mode, the fingerprint LED blinks BLUE . Any finger can be used. This mode confirms the user’s presence, but not their identity.
NOTE: In case of an NFC connection, the method for confirming the user pres-
ence can vary depending on the relevant service. You may need to tap the authenticator against the NFC reader field, or touch the fingerprint.
l Verification. In this mode, the fingerprint LED blinks MAGENTA . This mode is used to verify the user if at least one fingerprint is enrolled. You need to use a fingerprint that has been enrolled.
CAUTION: After 5 consecutive unsuccessful fingerprint attempts without any cor-
rect PIN entry in between, fingerprint verification is disabled until a correct PIN is entered. While the fingerprint verification is disabled, the PIN must be entered instead, followed by a finger touch on the sensor (to verify user presence). A correct PIN entry resets both the PIN error counter and the fingerprint error counter. A correct fingerprint match resets only the fingerprint error counter, and not the PIN error counter.
1.3.1 Fingerprint enrollment
Fingerprint enrollment is the process of registering a fingerprint template, i.e. a mathematical image of a fingerprint, in the authenticator. With this, it is possible to identify the user by a simple finger touch on the fingerprint sensor. You need to configure the PIN before you can enroll a fingerprint. This is because the PIN serves as a fall-back method in case of unsuccessful fingerprint attempts.
The authenticator can save up to 5 fingerprint templates. If you try to enroll an additional fingerprint, the device returns an error message to indicate that no fingerprint enrollment can be performed. You can then free up space by removing one or several fingerprint templates. For information about deleting enrolled fingerprints, see 4.3.2 Delete enrolled fingerprints.

1 Product overview DIGIPASS FX1 BIO User Manual

5

NOTE: In the Windows Settings app, if you try to enroll a fingerprint and the fin-
gerprint storage is already full, a general error message will be displayed, indicating that something went wrong during enrollment.

1 Product overview DIGIPASS FX1 BIO User Manual

6

1.4 LED indicators

The device has three LEDs on its front side, which indicate the status of Bluetooth, fingerprint, and battery level.

Table 1: Description of Bluetooth LED

LED

Description

Off
Blinking BLUE BLUE

Bluetooth is disabled, or enabled but there is no connection, and pairing mode is not currently active. Bluetooth pairing mode. Connected to a Bluetooth host.

Table 2: Description of fingerprint LED

LED

Description

Off

Idle state.

Blinking BLUE Blinking MAGENTA
MAGENTA GREEN
Fast blinking RED 5 times YELLOW

Waiting for finger touch for user presence detection. Any finger can be used. Waiting for finger touch for user verification. An enrolled finger must be used.
-OR-
Waiting for finger touch during fingerprint enrollment. Finger on the sensor, only for user verification. Fingerprint match successful for user verification.
-OR-
Fingerprint image captured during enrollment. Fingerprint match failed for user verification. Fingerprint image rejected because mobility is too low or coverage is too low, during enrollment. You are requested to slightly move/shift your finger and try again.

Table 3: Description of battery LED

LED

Description

Off

Authenticator is turned off.

1 Product overview DIGIPASS FX1 BIO User Manual

7

Table 3: Description of battery LED (continued)

LED

Description

Fast blinking RED 5 times then power off Blinking ORANGE Blinking GREEN GREEN
Fast blinking MAGENTA

Battery at critical level, USB not connected.
Battery at warning level or lower, USB not connected. Battery charging, USB connected. Battery fully charged, USB connected. -ORBattery at normal level, USB not connected. Battery charging disabled because out of operational temperature range (under 0°C or above 45°C).

1 Product overview DIGIPASS FX1 BIO User Manual

8

1.5 Charge the battery
To recharge the authenticator, plug the USB cable into the USB port of a PC, phone, or wall charger. Once the battery is fully charged, the battery LED indicator stops blinking and turns GREEN .
NOTE: As a safety measure, battery charging is disabled if the device is out of its
operational temperature range (0°C­45°C). On the authenticator, this protection is visualized by a fast blinking of the battery LED in MAGENTA .

1 Product overview DIGIPASS FX1 BIO User Manual

9

Getting started

2

2.1 First steps
2.1.1 Turn the authenticator on/off
In standalone mode (without USB connection)
l To turn on the authenticator, press the Power button for one second. l To turn off the authenticator, press and hold the Power button. l The authenticator will automatically turn off after 60 seconds of inactivity.
In USB-connected mode
l To turn on the authenticator, plug the USB cable. l To turn off the authenticator, unplug the USB cable.
NOTE: When you use the DIGIPASS FX1 BIO authenticator for the first time, you
need to connect the authenticator via USB. You will not be able to turn it on by pressing the Power button.
2.1.2 Connect your authenticator
You can connect your authenticator via Bluetooth LE, USB, or NFC.

2 Getting started DIGIPASS FX1 BIO User Manual

10

2.2 Initial authenticator setup
The following applications provide facilities to set up and manage your authenticator: l On Windows, you can manage your authenticator in the Windows Settings app. l On macOS and Linux, you can manage your authenticator via the Google Chrome security settings.
The initial authenticator setup involves the following steps: 1. Set the PIN 2. Enroll a fingerprint
NOTE: You need to set the PIN before you can enroll a fingerprint.
2.2.1 Windows
To set the PIN (Windows Settings app)
1. Connect your authenticator. 2. Click the Start button on your computer and select Settings to open the Win-
dows Settings app. 3. Select Accounts > Sign-in options. 4. Click Security Key, then click Manage. 5. When prompted, touch the fingerprint sensor on the authenticator.
The Windows Hello setup dialog is displayed. 6. Under Security Key PIN, click Add. 7. Specify and confirm the authenticator PIN, and click OK. See 1.2 PIN protection
for PIN requirements.

2 Getting started DIGIPASS FX1 BIO User Manual

11

To enroll a fingerprint (Windows Settings app)
1. In the Windows Hello setup dialog, under Security Key Fingerprint, click Set up. 2. Enter your PIN and click OK. 3. Follow the on-screen instructions to enroll your fingerprint. 4. When fingerprint enrollment is completed, click Done.
2.2.2 macOS and Linux
To set the PIN (Google Chrome)
1. Connect your authenticator. 2. In Google Chrome, navigate to the Manage security keys page:
l Click Customize and control Google Chrome and select Settings > Privacy and security > Security > Manage security keys.
-ORl Type the following address in the address bar: chrome://settings/securityKeys
3. Click Create a PIN. 4. When prompted, touch the fingerprint sensor on the authenticator. 5. Specify and confirm the PIN, and click Save. See 1.2 PIN protection for PIN
requirements. 6. Click OK to complete the PIN creation.
To enroll a fingerprint (Google Chrome)
1. On the Manage security keys page, click Fingerprints. 2. When prompted, touch the fingerprint sensor on the authenticator. 3. Enter the PIN and click Continue.

2 Getting started DIGIPASS FX1 BIO User Manual

12

4. In the Manage fingerprints dialog, click Add. 5. Follow the on-screen instructions to enroll your fingerprint. 6. When the fingerprint has been captured, click Continue. 7. Specify a name for the fingerprint and click Continue. 8. Click Done to complete the fingerprint enrollment.

2 Getting started DIGIPASS FX1 BIO User Manual

13

2.3 Use the authenticator
The steps for using the DIGIPASS FX1 BIO authenticator vary depending on your application provider’s setup. See 3 FIDO authentication for an overview of the FIDO registration and sign-in process.

2 Getting started DIGIPASS FX1 BIO User Manual

14

FIDO authentication

3

For FIDO authentication, you first need to register your DIGIPASS FX1 BIO authenticator with the relevant service. After successful registration, you can sign in to the service with your fingerprint.
NOTE: FIDO operations are accessible via compatible browsers.

3.1 Get started with FIDO authentication

16

3 FIDO authentication DIGIPASS FX1 BIO User Manual

15

3.1 Get started with FIDO authentication
Registration and authentication workflows vary depending on the options that are used by the browser and the platform.
3.1.1 Before you begin
Before you can get started with FIDO authentication, ensure that you have completed the initial authenticator setup. For more information, see 2.2 Initial authenticator setup
3.1.2 Register the authenticator and sign in
To register the authenticator
1. Connect your authenticator via USB, Bluetooth LE, or NFC. 2. Follow the instructions for the relevant service to register the authenticator for
FIDO authentication. During the registration process, you usually need to name the authenticator, and provide your fingerprint and/or your PIN.
NOTE: The DIGIPASS FX1 BIO authenticator can save up to 100 discoverable cre-
dentials.
To sign in using FIDO authentication
1. Connect your authenticator via USB, Bluetooth LE, or NFC. 2. Follow the instructions for the service to which you want to sign in.
When prompted, provide your fingerprint and/or PIN for authentication.

3 FIDO authentication DIGIPASS FX1 BIO User Manual

16

Manage the authenticator

4

Depending on your operating system, you can use the following applications for authenticator management:
l On Windows, you can manage your authenticator in the Windows Settings app.
l On macOS and Linux, you can manage your authenticator via the Google Chrome security settings.

4.1 Manage Bluetooth settings

18

4.2 Change the PIN

19

4.3 Manage fingerprints

21

4.4 Remove FIDO credentials

24

4.5 Reset authenticator

25

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

17

4.1 Manage Bluetooth settings
4.1.1 Pair a new device
Before you can connect your DIGIPASS FX1 BIO authenticator over Bluetooth LE, you need to pair it with the host device.
To pair a new device
1. To activate the pairing mode, press and hold the Power button for a minimum duration of 5 seconds. While the authenticator is in pairing mode, the Bluetooth LED is blinking BLUE . In pairing mode, the authenticator is visible by any nearby device over Bluetooth, under the name “DIGIPASS FX1 BIO”.
2. Follow the instructions on your host device to add a new Bluetooth device.
3. Once the DIGIPASS FX1 BIO authenticator is detected on the host device, enter the pairing code 000000 (6 times zero) on the host device to complete the pairing process.
The DIGIPASS FX1 BIO authenticator can store a maximum of 7 paired devices. If the maximum is reached and a new device is paired, it replaces the oldest one that is stored.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

18

4.2 Change the PIN
4.2.1 Windows
To change the PIN (Windows Settings app)
1. Connect your authenticator and open the Windows Hello setup dialog in the Windows Settings app. See 2.2 Initial authenticator setup for instructions to open the dialog.
2. Under Security Key PIN, click Change. 3. Do the following:
a. Enter the old PIN. b. Enter and confirm the new PIN. See 1.2 PIN protection for PIN requirements. 4. Click OK.
4.2.2 macOS and Linux
To change the PIN (Google Chrome)
1. Connect your authenticator. 2. On the Manage security keys page of the Google Chrome security settings, click
Create a PIN. See 2.2 Initial authenticator setup for instructions to open the page. 3. When prompted, touch the fingerprint sensor on the authenticator.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

19

4. Do the following: a. Enter the old PIN. b. Enter and confirm the new PIN.
See 1.2 PIN protection for PIN requirements. 5. Click Save.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

20

4.3 Manage fingerprints
4.3.1 Enroll additional fingerprints
Windows
To enroll an additional fingerprint (Windows Settings app)
1. Connect your authenticator and open the Windows Hello setup dialog in the Windows Settings app. See 2.2 Initial authenticator setup for instructions to open the dialog.
2. Under Security Key Fingerprint, click Add another. 3. Enter your PIN and click OK. 4. Follow the on-screen instructions to enroll your fingerprint.
NOTE: If the fingerprint image is too similar to a previous one, the sensor can-
not get enough data to build the template. In this case, the fingerprint LED will turn YELLOW and you need to slightly change the angle and/or position of your fingertip on the sensor.
5. When the fingerprint enrollment is completed, click Done.
macOS and Linux
To enroll an additional fingerprint (Google Chrome)
1. Connect your authenticator. 2. On the Manage security keys page of the Google Chrome security settings, click
Fingerprints. See 2.2 Initial authenticator setup for instructions to open the page. 3. When prompted, touch the fingerprint sensor on the authenticator. 4. Enter the PIN and click Continue.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

21

5. In the Manage fingerprints dialog, click Add. 6. Follow the on-screen instructions to enroll your fingerprint.
NOTE: If the fingerprint image is too similar to a previous one, the sensor can-
not get enough data to build the template. In this case, the fingerprint LED will turn YELLOW and you need to slightly change the angle and/or position of your fingertip on the sensor.
7. When the fingerprint has been captured, click Continue. 8. Specify a name for the fingerprint and click Continue. 9. Click Done to complete the fingerprint enrollment.
4.3.2 Delete enrolled fingerprints
Windows
In Windows, it is not possible to remove individual fingerprints. If you want to delete a fingerprint, you need to delete all enrolled fingerprints.
To delete all fingerprint templates (Windows Settings app)
1. Connect your authenticator and open the Windows Hello setup dialog in the Windows Settings app. See 2.2 Initial authenticator setup for instructions to open the dialog.
2. Under Security Key Fingerprint, click Remove. 3. Enter your PIN and click OK.
All fingerprints that are stored on the authenticator are deleted.
macOS and Linux
In Google Chrome, you can view the list of enrolled fingerprints. From this list, you can select the fingerprint that you want to remove.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

22

To delete a fingerprint template (Google Chrome)
1. On the Manage security keys page of the Google Chrome security settings, click Fingerprints. See 2.2 Initial authenticator setup for instructions to open the page.
2. When prompted, touch the fingerprint sensor on the authenticator.
3. Enter the PIN and click Continue.
4. In the Manage fingerprints dialog, locate the relevant fingerprint and click x Delete.
5. Click Done.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

23

4.4 Remove FIDO credentials
4.4.1 Windows
The Windows Settings app does not support the removal of FIDO credentials.
4.4.2 macOS and Linux
In Google Chrome, you can view the list of discoverable credentials, and delete credentials as needed.
To remove FIDO credentials (Google Chrome)
1. Connect your authenticator. 2. In the Manage security keys page of the Google Chrome security settings, click
Sign-in data. See 2.2 Initial authenticator setup for instructions to open the page. 3. Locate the relevant credentials in the list and click the Delete icon. 4. Click Done.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

24

4.5 Reset authenticator
In some situations it is necessary to restore the factory settings of the DIGIPASS FX1 BIO authenticator, for example if the PIN is locked. A factory reset deletes all personal information that is stored on the authenticator:
l PIN l All fingerprint templates l All credentials l All accounts l All Bluetooth pairings
NOTE: Resetting the authenticator is possible only via a USB connection. You can-
not reset the authenticator via BLE or NFC connections.
4.5.1 Windows
To reset the authenticator (Windows Settings app)
1. Connect your authenticator and open the Windows Hello setup dialog in the Windows Settings app. See 2.2 Initial authenticator setup for instructions to open the dialog.
2. Under Reset Security Key, click Reset. 3. Click Proceed to confirm that you want to reset the authenticator. 4. When prompted, disconnect and reconnect the authenticator. 5. When prompted, touch the fingerprint sensor on the authenticator twice within
10 seconds after you have reconnected the authenticator. 6. When the reset is completed, click Done.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

25

4.5.2 macOS and Linux
To reset the authenticator (Google Chrome)
1. Connect your authenticator. 2. On the Manage security keys page of the Google Chrome security settings, click
Reset your security key. See 2.2 Initial authenticator setup for instructions to open the page. 3. When prompted, disconnect and reconnect the authenticator, then touch the fingerprint sensor on the authenticator. 4. When prompted, touch the fingerprint sensor on the authenticator to confirm the factory reset. 5. Click OK to complete the factory reset.

4 Manage the authenticator DIGIPASS FX1 BIO User Manual

26

Technical specifications and system requirements

5.1 Technical specifications

Table 4: Technical specifications for DIGIPASS FX1 BIO

Size

35mm (49.5 w/cable) (L) x 35(W) x 10.8mm(H)

Weight

11g

Fingerprint sensor

Capacitive

Bluetooth

Bluetooth 5.2 LE (Low Energy)

NFC

ISO 14443 / card-emulation mode / extended APDU

support

Battery

Rechargeable – 65 mAh

Cable

Integrated USB-C cable

Power supply in connected mode

Via USB-C, 4.75 to 5.50 volts

Dust & water resistance

Dust-safe and splashproof

Supported protocols

FIDO:

l FIDO U2F

l FIDO2.1: the device implements the CTAP2.1 specification

5.1.1 Battery performance
To optimize the performance of the rechargeable battery, use and charge your DIGIPASS FX1 BIO authenticator at least once every two months.

5 Technical specifications and system requirements DIGIPASS FX1 BIO User Manual

27

5.2 System requirements
Supported operating systems: l Windows 10 version 1903 or later l macOS 13 or later l Ubuntu 22.04.2 or later l Android 12 or later
Supported browsers: l Google Chrome 111 or later l All browsers that support the FIDO2 WebAuthn API
NOTE: For a list of compatible operating systems and browsers, refer to
https://www.onespan.com/digipassfidofx1bio.

5 Technical specifications and system requirements DIGIPASS FX1 BIO User Manual

28

Safety notice and regulatory

6

information

6.1 Safety notice
CAUTION: Failure to observe the safety instructions can result in fire, electric shock
and other injuries or damage to the device or other property. The housing is made of plastic with sensitive electronic components and batteries inside.
Safety instructions
l Do not pierce, break, crush, or cut the device or the battery. l Do not expose the device or the battery to an open flame or extremely high
temperatures. l Do not expose the device or the battery to liquids or extremely low air pres-
sure. l Do not drop the device or the battery. l The device or the battery must be recycled or disposed of separately from
household waste.

6 Safety notice and regulatory information DIGIPASS FX1 BIO User Manual

29

6.2 Regulatory and compliance information

Table 5: Certification and compliance

Short-term storage tem-

l -10° C to 50° C

perature

l 90% RH non-condensing

Operating temperature

l 0° C to 45° C l 85% RH non-condensing

Vibration
Drop Emission Immunity
Compliant with European Directives
Compliant with Federal Communications Commission

l 10 to 75 Hz
l 10 m/s² l 1 meter
l 4 kV contact discharges
l 8 kV air discharges
l 3 V/m from 80 to 1000 MHz l CE: 89/336/EEC or
2004/108/EC
l RoHS: 2002/95/EC
l WEEE: 2002/96/EC l FCC ID: 2AH88-FX1B
l IC: 27700-FX1B

l IEC60068-2-78 (damp heat)
l IEC60068-2-1 (cold) l IEC60068-2-78 (damp
heat)
l IEC60068-2-1 (cold) l IEC60068-2-6
l IEC60068-2-31 l EN55022 l EN55024

Statement of Compliance with EU Directive
OneSpan NV declares that this DIGIPASS FX1 BIO device is in compliance with the Essential requirements and other relevant provisions of Directive 2014/53/EU and 2015/863/EU. The full Declaration of Conformity can be requested from: Company: OneSpan NV Address: Romeinsesteenweg 564C, 1853 Strombeek-Bever, Belgium Email: legal@onespan.com
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

6 Safety notice and regulatory information DIGIPASS FX1 BIO User Manual

30

Changes or modifications made to this equipment not expressly approved by OneSpan NV may void the FCC authorization to operate this equipment.
FCC Interference Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
l Reorient or relocate the receiving antenna. l Increase the separation between the equipment and receiver. l Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. l Consult the dealer or an experienced radio/TV technician for help.
This portable transmitter with its antenna has shown compliance with FCC’s SAR limits for general population / uncontrolled exposure. The antenna used for this device must not be co-located or operating in conjunction with any other antenna or transmitter.
IC Notice for Canada
This Class B device complies with Canadian ICES-003 requirements for Information Technology Equipment (including Digital Apparatus). Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.
This Device complies with Industry Canada License-exempt RSS standard(s). Operation is subject to the following two conditions: 1) this device may not cause interference, and 2) this device must accept any interference, including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes: 1) l’appareil ne doit pas produire de brouillage; 2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Correct disposal of this product (Waste Electrical and Electronic Equipment)
Applicable in the European Union and other European countries with separate collection systems
This marking shown on the product or its literature, indicates that it should not be disposed with other household waste at the end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste disposal, please separate this from other types of waste and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the provider of the product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract. This product should not be mixed with other commercial waste for disposal.

6 Safety notice and regulatory information DIGIPASS FX1 BIO User Manual

31

References

• Electronic Signature, Cloud Authentication, Mobile App Security | OneSpan
• Electronic Signature, Cloud Authentication, Mobile App Security | OneSpan
• Resource Center | OneSpan
• Contact Support | OneSpan

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>