GNJINX Plastic Drawers Dresser Instruction Manual

June 1, 2024
GNJINX

GNJINX Plastic Drawers Dresser

GNJINX-Plastic-Drawers-Dresser-PRODUCT

Product Information

  • Check the accessories before installation:
    • Please classify the accessories by the model, calculate deficiencies and check the number of accessories according to the list. If there are any questions, please get in contact promptly and we will handle them. Be sure to disassemble fully without the instructions.
    • Cutting the installation time and risk the situation of additional disassembly halfway through the installation.
    • Due to the high-precision fit between the backs and the snaps, a slight force should be applied during installation to make the snap cover fit more seamless and tight.
  • Packaging Schemes
    • Base Frame*
    • Side Panel*
    • Rear Panel*
    • Top Cover*
    • Drawer
    • Panel*
    • Foot mat*
    • The pictures are for installation reference only; the specific products are subject to the actual product.
  • Press the Buckle for Easy Disassembly
    • Operation Method: Press the buckle at both ends of the side panel inward to easily disassemble the product.
  • Installation Method
    • Check the packaging before installation first!
  • Framework Installation
    • Ready to start installation: Firstly, we install side panels onto the base frame.
    • Install Side Panel: Insert the A-end of the side panel downwards and align it with the slot on the base frame for installation.
    • Install the other side panel: Follow step 2 to complete the installation of the side panel on the other side. And place the end of the base frame with a groove facing back for installing the rear panel.
    • Install the rear panel: Align the end of the rear panel with the insertion strip downwards and insert it into the groove of the base frame.
    • Complete the rear panel installation: Install the rear panel firmly and complete the installation.
    • Install the base frame: Align the grooved end of the base frame with the four corners of the chassis towards the side panel insert column, and then press them down.
    • Complete framework installation: Repeat the above steps to complete the installation of other layers of frameworks.
  • Top Cover Installation
    • Install the top cover: Place the side marked with an arrow inside the top cover facing forward, and align the four corners with the side panel.
  • Drawer Installation
    • Install drawers: Prepare the panel and drawers to begin the installation.
    • Install drawers and panels: Insert the insert strip at the bottom on the front of the drawer into the panel slot, and then tighten the panel onto the drawer. The upper snap of the panel needs to be fastly fastened onto the drawer.
    • Install the drawer on the frame: Push the installed drawer into the frame. The drawer has an anti-falling buckle design. When installing the drawer, align it horizontally and then push it in.
  • Foot Mat Installation
    • Install foot mats: Place the back of the cabinet flat and install foot mats at the bottom.
  • Completion of Installation
    • Notes: Different product installation methods are the same, and the pictures are for reference only. The specific products are subject to the actual product. If you encounter any other questions during the installation, please consult our customer service.

FAQs

  • What should I do if the accessories are missing or I have questions about them?
    • Please classify and check the accessories as per the list and contact customer service promptly if there are discrepancies or questions.
  • What is the proper method for disassembling the product?
    • Press the buckle at both ends of the side panel inward to easily disassemble the product.
  • Can I use the installation pictures as a reference?
    • Yes, the pictures are for installation reference only. However, the specific products are subject to the actual product.
  • What should I do if I encounter difficulties during installation?
    • It is recommended to apply a slight force during installation to ensure a tight fit. If further issues arise, consult customer service for assistance.

Instructions before installation

Check the accessories before installation

  1. Please classify the accessories of the storage cabinet before installation and check the number of accessories according to the list. If there are any omissions, please contact us promptly and we will resend them. Be sure to ensure that the accessories are complete before starting the installation to avoid the situation of laborious disassembly halfway through the installation!
  2. Due to the high-precision fit between the buckle and the snap, a slight force should be applied during installation to make the storage cabinet seamless and more stable!

Packaging Schemes

GNJINX-Plastic-Drawers-Dresser-FIG-1 \(1\)

  1. Base Frame*6
  2. side Panel*12 3
  3. Rear Panel*6
  4. Top Cover*1
  5. Drawer*6
  6. Panel*6
  7. Foot mats*4

The pictures are for installation reference only. The specific products are subject to the actual product.

Press the buckle for easy disassembly

  • Operation Method: Press the buckles at both ends of the side panel inward to easily disassemble the product.

Installation Method

Check the packaging before installation first!

  1. Ready to start installation: Firstly, we install side panels on the base frame.
  2. Install Side Panel: Insert the A-end of the side panel downwards and align it with the slot on the base frame for installation.
  3. Install the other side panel: Follow step 2 to complete the installation of the side panel on the other side. And place the end of the base frame with a groove facing back for installing the rear panel.
  4. Install the rear panel: Align the end of the rear panel with the insertion strip downwards and insert it into the groove of the base frame.
  5. Complete the rear panel installation: Install the rear panel firmly and complete the installation.
  6. Install the base frame: Align the grooved end of the base frame with the four corner slots of the chassis towards the side panel insert column, and then press them down.
  7. Complete framework installation: Repeat the above steps to complete the installation of other layers of frameworks.
  8. Install the top cover: Place the side marked with an arrow inside the top cover facing forward, and align the four corner slots with the side panel.
  9. Install drawers: Prepare the panel and drawers to begin the installation.
  10. Installing drawers and panels: Insert the insert strip at the bottom of the front end of the drawer into the panel slot, and then fasten the panel onto the drawer. The upper snap of the panel needs to be tightly fastened onto the drawer.
  11. Complete drawer installation: Fix the panel onto the drawer and complete the drawer installation.
  12. Install the drawer on the frame: Push the installed drawer into the frame. The drawer has an anti-falling buckle design. When installing the drawer, align it diagonally and then push it in.
  13. Install foot mats: Place the back of the cabinet flat and install foot mats at the bottom.

Complete the installation

Notes:

  • Different products’ installation methods are the same, and the pictures are for reference only.
  • The specific products are subject to the actual product.
  • If you encounter any other questions during the installation, please consult our customer service.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals