Wulian S50 Smart Wearable Watch User Manual

Wulian S50 Smart Wearable Watch

Product Information

Specifications:

• Compliance: FCC Part 15
• Radiation Exposure Limits: FCC-compliant
• Operating Distance: Minimum 0cm between radiator and body

Product Usage Instructions

Installation:

1. Ensure the device is placed in a well-ventilated area.
2. Keep a minimum distance of 0cm between the radiator of the device and your body during operation.
3. Connect the device to a power source as per the provided instructions.

Operation:

1. Turn on the device using the designated power button.
2. Follow the user manual for specific instructions on using the device’s features.
3. Monitor for any unusual behavior or interference during operation.

Maintenance:

1. Regularly clean the device with a soft, dry cloth to prevent dust buildup.
2. Avoid exposing the device to extreme temperatures or moisture.
3. Refer to the user manual for troubleshooting steps in case of any issues.

FAQ

Q: Can I modify the device without voiding the warranty?
A: Any changes or modifications not approved by the manufacturer can void your warranty and authority to operate the equipment.
Please refer to the user manual for guidance on authorized modifications.

Q: What should I do if I experience interference during operation?
A: If you encounter interference during operation, try adjusting the positioning of the device. Ensure there are no other electronic devices causing interference nearby. If the issue persists, contact customer support for further assistance.

Appearance Description

Charging Instructions

Thank you for purchasing our smart health watch. Please read the instruction manual carefully when using it for the first time; first press and hold the main button of the watch for 5 seconds to turn it on. If the battery is low or exhausted, please charge it first.After connecting the charging cable, plug the USB interface into (such as a computer host,mobile power supply, or standard power adapter) for charging. The input voltage is required to be 5V1A or 5V2A.|

APP Download and Wireless Pairing

Install APP
Before using this device, please download and install the APP, scan the QR code on the right side with your mobile phone, and select the corresponding software to install according to the system of your mobile phone.
You can also search for “FitCloudPro” in Apple AppStore and install it, and Android users can download from other shops, such as search for “FitCloudPro”in Android Market to download and install it.
(Compatible System: for iOS12.0, Android9.0 and above)

Step 1: APP Wireless Pairing

1. New users use the device for the first time, he/she needs to download and install the APP, launch the APP and register as required; after registration is completed, enter the account number and password to log in.
2. Turn on the wireless on your mobile phone, then connect the watch on the APP to complete the pairing.

Step 2: Audio Wireless Pairing
Complete the audio wireless pairing, the steps are shown in the figure below.

1. In the watch control center, tap the call icon to enter.
2. You can set call audio/media audio.

Change Dial

Turn on the smartwatch, long press the dial over 1s to switch the dial.
Connect the smartwatch to your phone, download more dials from dial library within the FitCloudPro app.
(4 built-in dials, 1 replaceable dial)

Operating Method

Upper Button:

1. Long Press – Turn on/off the smartwatch.
2. Short Press – Light up the screen/Enter the secondary menu.

Custom buttons:

1. Short press to light up the screen;
2. Long press to enter the custom function interface.
   • Long Press the Screen: Long press the home screen over 1s to switch the dial.
   • Swipe to Left: Move to the next interface.
   • Swipe to Right: Shortcut menu/back to the previous interface.
   • Slide Up: Slide up the home screen to view the message.
   • Slide Down: Slide down the home screen to enter the settings menu.

Product Information

• Chip: RTL8763EWE
• Screen: 2.02″ TFT Color Screen
• Resolution: 320*390 Pixels
• Waterproof Standard: 3ATM
• Heart Rate Sensor: HX3918
• Compatibility: for iOS 12.0/Android 9.0 and above
• Battery Capacity: 400mAh
• Working Time: 5-7 Days
• Connection Method: Wireless 5.2
• Material of Strap: Silicone
• Working Temperature: -10°C~50 °C
• Package Included: Smart Watch Body,
• Charging Cable, Strap, User’s Manual

Supported Languages

Languages Supported by the SmartWatch: Simplified Chinese, English, Russian, Spanish,German, Italian, French, Portuguese, Turkish, Hebrew, Arabic, Vietnamese, Thai, Farsi,Malaysian, and factory default English.
Languages Supported by APP: English, Chinese Simplified, Chinese Traditional, German,French, Arabic, Czech, Greek, Spanish, Japanese, Farsi, Italian, Korean, Dutch, Polish,Portuguese, Russian, Finnish, Swedish, Thai, Hungarian, Slovak, Croatian, Albanian,Turkish, Ukrainian, Hindi, Malaysian, and more languages will be added continuously.

Main Functions

Precautionary Note

1. Prevent the watch from severe hit.
2. Prevent the watch from contacting chemicals such as benzene, thinner etc.
3. Prevent the watch from approaching strong magnetic field, electric shock station.
4. Prevent the watch from direct light or heat-generating appliances.
5. Do not disassemble, repair or remodel by yourself.
6. Please properly classify and dispose the waste packaging, batteries and old electronic products.
7. Not suitable for bath-taking wearing. (Temperature can not exceed 45 °C)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>