SHARP 4T-C75EL8UR 4K Ultra HD LED TV User Guide

SHARE • Roku TV
4K UItra HD LED TV

Setup Guide

4T-C75EL8UR 4K Ultra HD LED TV

Only for Mexico
SHARP CORPORATION MEXICO, S.A. DE C.V.
JAIME BALMES No 8 OFICINAS 803 Y 804
COL. LOS MORALES POLANCO, CIUDAD DE M~XICO
C.P. 11510 TEL: 551500 1500

Package Contents

The packaging where your new TV comes contains the following accessories:

• Remote control
• Two AAA batteries
• Quick Start Guide
• 6 screws (M5 x 17 mm)
• 2 legs that form the TV stand

IMPORTANT:
To prevent accidentally discarding items that came with your TV, be sure to check ALL the foam in the carton box.

Required tools and devices:

• Wireless router (not included) for Internet connectivity.
• Phillips screwdriver (not included) to secure the TV stand.
• HDMI cable and other cables (not included) to connect external devices to the TV.
• Wall mount bracket (not included) if you prefer to mount the TV to the wall.
• Computer or mobile device (not included) needed for setup.

Important Information

IMPORTANT:
To aid reporting in case of loss or theft,please record the TV’s model and serial numbers in the space provided. The numbers are located at the rear and left side of the TV.

Mo e No.:____
Serial No:____

WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE REAR COVER.
IT DOES NOT CONTAIN SPARE PARTS INSIDE IT.
CONTACT QUALIFIED SERVICE PERSONNEL.

This symbol indicates the risk of electric shock to the equipment. Only qualified personnel should open and disassemble this appliance.
This symbol indicates the presence of important instructions for the use and maintenance of the equipment, included in the user manual that comes with your equipment.

Caution: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Warning: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly approved by the manufacturer could void the user’s authority to operate this equipment.
Caution: This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded cables and  connectors for connections.
Warning: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Warning: To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.

CAUTION

• The replacement of a battery with an incorrect type can defeat a safeguard (for example, in the case of some lithium battery types).
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, can result in an explosion.
• Leaving a battery in an extremely high temperature environment can result in an explosion or the leakage of flammable liquid or gas.
• A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
• Risk of fire or explosion if the battery is replaced by an incorrect type.
• Attention should be drawn to environmental aspects of battery disposal.

Dear SHARP Roku TV Customer
Thank you for your purchase of the Sharp Roku TV. To ensure safety and many years of trouble-free
operation of your product, please read the Important Safety Instructions carefully before using this product.

Important Safety Instructions
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can result in  electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of your TV, please read the following precautions  carefully before using the product.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for  your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.

11.  Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

13. Unplug this apparatus during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has  been exposed to rain or moisture, does not operate normally, or has been dropped.
    Additional Safety Information

15. Power Sources-This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to  operate from battery power, or other sources, refer to the operating instructions.

16. Overloading–Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry-Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.

18. Damage Requiring Service-Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
    a) When the AC cord or plug is damaged,
    b) If liquid has been spilled, or objects have fallen into the product,
    c) If the product has been exposed to rain or water,
    d) If the product does not operate normally by following the operating instructions.
    Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will o en require extensive work by a qualified technician to restore the product to its normal operation,
    e) If the product has been dropped or damaged in any way, and
    f) When the product exhibits a distinct change in performance – this indicates a need for service.

19. Replacement Parts-When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part.
    Unauthorized substitutions may result in fire, electric shock, or other hazards.

20. Safety Check-Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.

21. Wall or ceiling mounting-When mounting the product on a wall or ceiling, be sure to install the product according to the method recommended by the manufacturer.

22. Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

WARNING – Stability Hazard
A television may fall causing serious personal injury or death. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

• ALWAYS use cabinets or stands or mounting method recommended by the manufacturer of the television.
• ALWAYS use furniture that can safely support the television.
• ALWAYS ensure the television is not overhanging the edge of supporting furniture.
• ALWAYS educate children about the dangers of climbing on furniture to reach the television or its controls.
• ALWAYS route cords and cables connected to your television so they cannot be tripped over, pulled or grabbed.
• NEVER place the television in an unstable location. Placing the product on an unstable base can cause the product to fall, resulting in serious personal injuries as well as damage to the product.
• NEVER place a television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.
• NEVER place the television on cloth or other materials that may be located between the television and supporting furniture.
• NEVER place items that might tempt children to climb, such as toys and remote controls, on the top of the television or furniture on which the television is placed.

If the existing television set is going to be retained and relocated, the same considerations as above should be applied.

Security instructions:

• Selecting the location Select a place with no direct sunlight and good ventilation.

• Ventilation -The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not place the product on a  bed, sofa, rug or other similar surface, since they can block ventilation openings. Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.

• The front panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 8,294,400 pixels, giving you fine picture details. Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red.
  Please note that this does not affect the performance of your product.

• Lightning- For added protection for this television equipment during a lightning storm, or when it is left unattend and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna.
  This will prevent damage to the equipment due to lightning and power-line surges.

• Power Lines -An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care  should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• To prevent fire, never place any type of candle or flames on the top or near the TV set.

• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Do not display a still picture for a long time, as this could cause an image to remain.

• Where the MAINS plug is used as the disconnect device, the disconnect device shall remain readily operable.

• To prevent fire or shock hazard, do not expose this product to dripping or splashing. No objects filled with liquids, such as vases, should be placed on the product.

• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may result in fire or electric shock. Exercise special caution when using the product around children.
  Do not install the TV in a location in which it will be subject to water drops such as underneath an air conditioning unit or in the vicinity of a humidifier.

• Water drops falling onto the TV and water entering inside it may result in fire, electric shock, or malfunctions.

• We recommend that you install the TV at least 3.3 fts (1m) away from the outlet of an air conditioner.

Caring for the cabinet

• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth soaked in neutral detergent diluted with water and thoroughly wrung out, and then wipe with a soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
• Do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time.
  Plasticizers inside the plastic may cause the cabinet to deform and cause the paint to peel off.

Caring for the front panel

• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.).
• To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the front panel.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty.
• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning.

Especially for child safety

• Don’t allow children to climb on or play with the TV.
• Don’t place the TV on furniture that can easily be used as steps, such as a chest of drawers.
• Remember that children can become excited while watching a program, especially on a “larger than life” TV.
• Care should be taken to place or install the TV where it cannot be pushed, pulled over, or knocked down.
• Care should be taken to route all cords and cables connected to the TV so that they cannot be pulled or grabbed by curious children.

Attach the TV stand or wall mount bracket (not included)

Attach TV stand (For steps to attach the wall mount see page 9)

CAUTION:

• Be sure to disconnect the A/C power cord before installing a stand or Wall-mount brackets.
• The LED display is very fragile and must be protected at all times while installing the stand. Be sure to protect the TV screen from getting scratched or damaged by any hard objects. In addition, NEVER PRESS the front of the TV at any time because it could  crack.

To attach the left and right leg that forms the stand:

1. Carefully place your TV face down on a soft, flat surface to prevent objects from scratching and damaging it.

2. Place the stands into each of the bottom slots, insert and tightened the screws (included in the accessory bag) in the circled area with the screwdriver (not included) until the bases are secure.

3. The TV is ready to use.

Secure the mounting bracket to the wall (not included)
Before you begin with the instructions from the vendor that you have decided to purchase the VESA mount, be sure to start with the following steps:

1. Place the TV face down on a clean, padded surface.
2. Remove the stands if you have previously placed them.
3. Place the spacers (not included) in the 4 mounting holes.

CAUTION:

• Please purchase a suitable mounting bracket for your TV when you decide to mount it to the wall.

• When mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.

• Ensure that the bearing capacity of the wall for mount installation is no less than 4 times the weight of the TV and the mounting bracket to avoid falling.

• Make sure there are no cables or conduits in the section of the wall where the mounting bracket will be installed.

• Please contact a professional technician to complete the installation. The company shall not be liable for accidents, personal injury or damage caused by improper installation of the TV.
  Note:

• If any screws are found in the mounting bracket screw hole behind the TV, before installing the mounting bracket, the screws shall be removed and put in place for later use.

• Please buy the wall screws according to your actual situation.

• If there are flat tail self-tapping screws in the accessories, check if they are suitable for your mounting bracket.

Buttons and Ports

Connect devices to your TV
Your TV has several options for connecting different devices. The method in which you connect will be
based upon the type of cables you have and the available outputs on your device.
Check the jacks for position and type before making any connections to your TV. An incorrect or loose
connection can cause problems with color and image. Make sure all connections are tight and secure.
The TV may not be compatible with all external devices. To check compatibility, please refer to the user
manual of the external device you want to connect.
Do not connect external equipment while TV’s power cord is plugged in. It may cause an electric shock.

Connecting a digital sound bar to use Audio Return Channel
To connect a digital sound bar with HDMI cable proceed with the following steps:

1. Connect the cable that’s attached to the digital sound bar to the [HDMI / ARC] port on the TV.
2. Turn on the digital sound bar by pressing the Power button.
3. Press the [ ]button on your remote to display the full menu settings and then use the UP and DOWN arrows on the [D-pad] of your remote to select Settings.
4. Press the RIGHT arrow to navigate to System> Control other devices (CEC).
5. Highlight HDMI ARC.
6. Press OK to enable or disable the feature.

Notes:

• Only digital sound bars that require a wired connection are compatible with the Smart TV.
• If the device has an Input Selector feature then make sure to change it to TV option.
• Enabling HDMI ARC also enables System audio control. After enabling HDMI ARC, you can disable System audio control if you prefer.

Connecting to a wireless network
Connect your TV to your wireless network, for this you need a wireless router or modem. See the ilustration below.
The TV’s built-in Wireless LAN Adapter supports the IEEE 802.11 a/b/g/n. communication protocols.
We recommend using the IEEE 802.11 a/b/g/n router.

Notes:

• You must use the built-in Wireless LAN Adapter in order to use a wireless network, because the set doesn’t support an external USB network adapter.
• If the wireless router supports DHCP, your TV can connect more easily to the wireless network.
• If you apply a security system other than the systems listed below, it will not work with the TV. Security systems: WPA, WEP, WPA2.

Using your TV remote control

Begin using your remote

1. Slide the back cover to open the battery compartment of your remote control.
2. Insert two AAA size batteries. Make sure to match the”+” and”-” ends of the batteries with the”+” and”-” ends inside the battery compartment.
3. Replace the battery compartment cover.

Buttons on your TV remote

Disclaimer:
Remotes may vary. The images in this manual are for reference only. Actual remote has pre-set channel buttons.
A 16 GB is required. Maximum playback of 90 minutes.

Universal remote setup instructions:
Using your cable set-top box or satellite receiver remote as a universal remote. If you prefer to use your cable set-top box or satellite receiver remote as a universal remote, please refer to the manual that your cable or satellite service provided. It will include  instructions on how to program their remote to your television. You can find codes that work with your Sharp Roku TV and the most common cable and satellite provider’s universal remote controls at www.roku.com/universalremote.

IMPORTANT NOTICE:
Depending on the country where the TV is installed, some of the Roku® channels may not be available. The quick launch buttons on the remote control associated with those channels will not work. All other functionalities of the remote will work as designed.

Power on the TV

1. Plug one end of the power cord into a power outlet.
2. After installing the batteries on your remote, press the Power button @ to turn on the TV. Choose Set up for home use to access all TV features and maximize Eco Save.

NOTE: Only retailers that need to set up the TV for display should select Set up for store use.

Complete the guided setup

Tip: Have your wireless network name and password handy.

1. Follow the on-screen instructions that will appear on your Roku TV.

2. Activate your Roku TV using your computer, smartphone or tablet to set up your Roku account.
   You need a Roku account to activate your Roku TV and access entertainment across thousands of streaming channels.
   Note: Roku does not charge for activation support- beware of scams.
   Roku accounts are free and while a valid credit card number is not required to create a Roku account, saving your credit card information makes renting, purchasing, and subscribing to entertainment from the Roku Channel Store fast and convenient.

3. Once connected to your account, your TV will automatically update with the latest software, and  you can start streaming immediately.
   If you aren’t ready to connect your TV to a wireless network, you can still use it as a regular TV.

4. For more information, visit https://sharpusa.com, https://sharp.ca/en/ and go.roku.com/tvmanual *Content resolution is based on TV compatibility and varies by channel and content. Channels are subject to change, vary by region, and may require  payment.

Product specifications

(1,674 x 960 x75 mm)
With stand| 65.91×40.31 x 13.89in (1,674 x1,024 x 353 mm)
Weight| Without stand| 61.07 lbs (27.7 kg)
With stand| 63.27 lbs (28. 7 kg)
Active Screen Size (Diagonal)| 74.52 in (189.3 cm)
Screen Resolution| 3,840 x 2,160 Pixels
Audio Power| 8 W + 8 W
Rated Power Consumption| 300 W”
(0.5 W Standby mode)
Power Supply| 100 – 240 V∼50/60 Hz
HDMI Input| 480p, 720p, 1080i, 1080p, 2160p.
Receiving Systems| Analog| NTSC
Digital| ATSC
Ports| 4 HDMI ports, 2 USB ports, 1 Optical output, 1 RF input, 1 Earphone audio output, 1 RCA composite video audio input and 1 LAN.
Other Features| Smart TV, Dynamic contrast picture, VESA standard wall mount support.

Quick guide to solving problems

When you experience an issue with your TV, turn it off and on again. If this does not solve the problem, you may refer to the following list of possible solutions. If the problem persist, please contact Manufacturer Customer Care.

on. If it is, then there is power to the TV.
• The TV may be in Standby mode. Press the [ ] button on the remote control to activate the unit from  Standby.
• Check if the power cord is plugged into an active electrical outlet.
You have connected an external source to your  TV but cannot find it on the Home screen.| • Make sure your external device is turned on.
• Check to see if the correct input tile is selected in the Home screen for the external source you want to  view.
• Check to see if the external source device connection is snug and fully inserted into to the TV port.
• The HDMI port might be hidden from Home screen. Go to Settings> TV Input> to set up the
HDMI input on the Home screen.
When turning your TV on, there is a display  fora few seconds before the picture appears.| • This is normal. If you have already set up your TV, it is initializing and searching for previous
setting information.
You see normal picture but do not hear any sound.| • Check that volume is turned on.
• Check if the Mute mode is On. Turn off mute by pressing the Mute button again, or pressing
volume up.
• Make sure there is nothing plugged into headphones jack on the TV.
• Connecting headphones to the TV will mute the main speakers.
You hear sound but the picture color is  faded or in black and white.| • Check that the Color value is set to 50 or greater.
• Check the color on another channel or input tile.
Your sound or picture is distorted and appears wavy.| • Turn off and/or remove electrical appliance that may be nearby the TV panel.
• Insert the power plug of the TV set into another power outlet.
The sound or picture is blurry or cuts out.| • If you are using an external antenna, check the connections for a snug and tight fit.
• Adjust or reposition the antenna placement.
You see horizontal/vertical stripe on the  picture, or it is shaking.| • Turn off and/or remove electrical appliance that may be nearby the TV panel.
• Insert the TV power cord into another electrical outlet.
You cannot con ect to your wireless  network.| • Make sure you have selected the correct wireless network name on the Choose Wireless
Network screen.
• Make sure you have entered your wireless network password correctly (passwords are case
sensitive).
• If you have the SSID broadcast on your wireless router, add your network by selecting Add
Private Network from the Select Wireless Network screen.
• To check if it is a password problem, temporarily disable security on the wireless router.
• If you are not getting 3 or more signal strength bars above the wireless network icon, adjust
the position of the TV (if possible) or the wireless router. Even a few inches in one direction
or another my help.
Your remote control is not responding to  button presses| • Check that the TV is still on.
• Check that the batteries are good and inserted properly.
• Check that there are no obstacles between the remote control and the front of the TV.
• Try moving closer to the TV. If the LED on the TV flashes when you press any button on the
remote control, the issue is not with the remote control.

Certifications and Compliance

| Roku, Roku TV, the Roku logo, and the purple d-pad design are trademarks of Roku, Inc. All other  trademarks and logos mentioned are the property of their respective owners.
---|---
| The terms HDMI, HDMI High-Definition Multimedia Interface, HDMI Trade Dress and the HDMI  Logos are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
| Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio and the double-D symbol are  trademarks of Dolby Laboratories Licensing Corporation.
| Covered by one or more claims of the HEVC patents listed at patentlist.accessadvance.com.

WEEE Directive
Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it  responsibly to promote the sustainable reuse of material resources.
To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.

FCC Related Information (Only for USA)
FCC Caution:
This device has been tested and found to comply with the limits for a Class B digital device persuant to Part 15 of the FCC Rules. This limits are designed to provide rasonable protection against harmful interference in a residential installation. This device  generates, uses, and can radiate radio frequency energy and, if not installed and used accordance to instructions, may cause harmful interference in radio communications. However, ther is no guarrantee that interference will not occur in a particular installation.  If this device does cause harmful interference to radio or television reception which can be detemined by turning the device off and on, user in encouraged to try to correct interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and the receiver.
• Connect the device to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FCC Statement:
High power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between theradiator & your body.
This device and its antenna(s) must not be co-located or operating with any other antenna or transmitter.

SUPPLIER’S DECLARATION OF CONFORMITY:
SHARP LED TV, MODEL 4T-C75EL8UR
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
100 Paragon Drive Montvale, NJ 07645 USA For Customers: URL http://sharpusa.com/

IC Related Information (Only for Canada)
IC Caution:
This equipment complies with Industry Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may  cause undesired operation of this equipment.

IC Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This device and its antenna(s) must not  be co-located or operating with any other antenna or transmitter.

The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment.

• The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.
• For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the bands 5250-5350 MHz and 5470-5725MHz shall be such that the equipment still complies with the e.i.r.p. limit.
• For devices with detachable antenna(s), the maximum antenna gain permitted for devices in the band 5725-5850 MHz shall be such that the equipment still complies with the e.i.r.p. limits specified for point-to-point and non-point-to-point operation as  appropriate.
• The worst-case tilt angle(s) necessary to remain compliant with the e.i.r.p. elevation mask requirement set forth in Section 6.2.2(3) shall be clearly indicated.
• High power radars are allocated as primary users (i.e. priority users) of the bands 5250-5350MHz and 5650-5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices.

LIMITED WARRANTY

For USA customers only

CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand LED Television (the”Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its  option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the Purchaser for parts or labor for the period{s) set forth below.
This Warranty does not apply to any cosmetic or consumable items of the Product or if the serial number or model number affixed to the Product has been removed, defaced, changed, altered or tampered with. This Warranty does not cover installation or signal  reception problems. This limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely for the non-commercial, household use of the Product by consumers in their home or residence. In order to enforce the rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof or purchase to the servicer, which proof must include the date of purchase.
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL  EXPRESS AND IMPLIED WARRANT! ES I NCLU DI NG THE WARRAN Tl ES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR PU RPO SE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW,  IMPLIED WARRANTIES MAY NOT VALIDLY BE DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES  YOU SPECIFIC LEGAL RIGHT. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the Purchaser and only for the time periods set forth herein. No other representations or promises made by anyone  are permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fullfilment of all liabilities and responsibilities of Sharp to the Purchaser with respect to the Product, and shall constitute full satisfaction of  all claims, whether based on contract, negligence, strict liability or otherwise.Sharp does not warrant nor shall Sharp be reliable,or in any way responsible for Products which have been subject to abuse (including, but not limited to improper voltage), accident  misuse, negligence, lack of reasonable care, alteration, modification, tampering, improper installation, operation or maintenance or any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone other than the  Sharp personnel or Sharp authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on warranties or on remedies for breach in certain transactions,  in such states, the limits herein may not apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE (50) UNITED STATES, THE DISTRICT OF COLUMBIA, AND PUERTO RICO.

For Canada customers only
Consumer Electronics Products
Congratulations on your purchase!
Sharp Electronics of Canada Ltd. (“Sharp”) warrants to the first purchaser for this Sharp brand product (“Product”), when shipped in its original container and sold or distributed in Canada by Sharp or by an authorized Sharp dealer, and Product was not sold “as  is” or “sales final” that the Product will during the applicable warranty period, be free from defects in material and workmanship, and will within the applicable warranty period, either repair the defective Product or provide the first purchaser a replacement  of the defective roduct. The replacement unit can be new or remanufactured.
Conditions: This limited warranty shall not apply to:
(a) Any defects caused or repairs required as a result of abusive operation, negligence, accident, improper installation or inappropriate use as outlined in the owner’s manual or other applicable Product documentation.
(b) Any defects caused or repairs required as a result of any Product that has been tampered with, modified, adjusted or repaired by any person other than Sharp, a Sharp authorized service centre or a Sharp authorized servicing dealer.
(c) Any defects caused or repairs required as a result of the use of the Product with items not specified or approved by Sharp, including but not limited to chemical cleaning agents.
(d) Any replacement of accessories, consumable or peripheral items required through normal use of the Product, including but not limited to remote controls, AC adapters, batteries, cables.
(e) Any cosmetic damage to the Product surface or exterior that has been defaced or caused by normal wear and tear.
(f) Any defects caused or repairs required as a result of damage caused by any external or environmental conditions, including but not limited to, transmission line/power line voltage or liquid spillage or acts of God.
(g) Any commercial use of the Product included but not limited to use in a place of business, communal areas of a multiple dwelling condominium or apartment complex, or otherwise used in a place other than a private home.
(h) If the serial number or model number affixed to Product has been removed, defaced, changed, altered, or tampered with.
(i) Any installation, delivery, setup and/or programming charges.

WARRANTY PERIOD for SHARP TV: 1 YEAR
(from the date of original purchase – please save the receipt as proof of purchase).
For support or warranty repairs/replacements, please contact us:

• By phone: 1-833-612-1382
• Or e-mail: customerservice@cttmservice.com

If needed, more information on this Limited Warranty or the nearest authorized Sharp Service Centre or Dealer can be obtained through our website (www.sharp.ca) or by mail: Sharp Electronics Of Canada Ltd. 335 Britannia Road East Mississauga, Ontario  L4Z 1W9.

THIS LIMITED WARRANTY IS VALID ONLY IN CANADA ‘,

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>