NICEDACK Bike Fender Adjustable MTB Mud Guard Installation Guide
- June 1, 2024
- NICEDACK
Table of Contents
MTB MUDGUARD
INSTALLATION GUIDE
Warm Tips
Thank you for purchasing our NICEDACK MTB mudguard.
NICEDACK is a professional brand in Sports & Outdoors, specialized in design
and manufacture of mountain bike fenders for many years. Hope our products can
bring to very customer a good experience on cycling.
Before using this product, please read the manual carefully. In case of any
printing or translation error, we apologize for the inconvenience.
If you have any questions when you install this fender on your mountain bike,
please don’t hesitate to contact our team through following ways.
Looking forward to receiving your comments about this product.
Follow us:
Installation Guide
Step 1: Prepare the mudguard and zip ties. Step2: Pass the zip ties
through the holes on the mudguard. Step3: Place the mudguard into the
middle of the fork or bike frame, then adjust it on suitable position with
correct angle. Last, stretch the zip ties and make them tightly.
Step4: Finally, cut the remaining zip ties with
scissors.
Reminder: To avoid the uneven edges may scratch you, please hide the
endpoint of zip ties after cutting.
Where is the mudguard installed?
This picture is for your reference.
info@nicedack.com
NICEDACK _Team
For more good products, welcome to visit our official website:
www.nicedack.com
SUCCESS COURIER SL
CALLE RIO TORMES NUM.1,PLANTA 1,DERECHA,
OFICINA 3,Fuenlabrada,Madrid, 28947 Spain
SUCCESSSERVICE2@hotmail.com
info@nicedack.com
NICEDACK _Team
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>