buro 142-PU3-AT Polo Drafting Stool Instruction Manual

buro 142-PU3-AT Polo Drafting Stool

Product Information

Specifications

• Product Name: BURO POLO ARCHITECTURAL STOOL
• Parts Included: Base, Castors, Glides, Gas Lift, Foot Ring, Seat
• Materials: PU/PVC Upholstery, Flame Resistant Foam
• Flame Resistance Standards: Ca117 Section A Part I & Section D Part II (Foam), Ca117 Section E Class I (Upholstery)

Product Usage Instructions

Assembly

1. Remove all items from the carton and verify all pieces before assembly.
2. Assemble the stool in the following order:
   • Step 1: Attach Castors/Glides (Parts A B or C)
   • Step 2: Attach the Gas Lift (Part E) to the Base (Part D)
   • Step 3: Affix the Seat (Part F) to complete assembly.

FAQ

• Q: How often should I check the bolts and screws?
• A: It is recommended to check all bolts, screws, and knobs every six months to ensure they are tight to prevent any potential risks or accidents.

PART LIST

KEY QTY DESCRIPTION

• A 1 Base
• B 5 Castors
• C 5 Glides
• D 1 Gas Lift
• E 1 Foot Ring
• F 1 Seat

BURO POLO ARCHITECTURAL STOOL

Installation Instructions

CARE & MAINTENANCE

GENERAL CARE

• To maintain the appearance of non-upholstered parts wipe the surface with a clean cloth dampened with a mild detergent solution.
• Do not remove any parts for separate cleaning.
• Do not saturate the fabric or interior with water or other cleaning liquids.
• Do not shampoo clean.
• Do not clean with a hot water extraction machine.
• Do not clean with the onsite dry cleaning machine.
• Protect from direct sunlight, heat and weather.

UPHOLSTERY CARE FOR PU/PVC

• Wipe with a clean cloth dampened with a mild upholstery detergent solution
• Use only vinyl care products suitable for upholstery vinyl and strictly under the manufacturer’s instructions
• Spot clean as above
• Treat spills and stains as soon as possible
• Persistent stains may require treatment by a professional cleaner
• Allow to dry thoroughly before reuse.

**UPHOLSTERY & FOAM SPECS***

FOAM

• Flame Resistant: Ca117 Section A Part I & Section D Part II
• UPHOLSTERY: PU/PVC
• Flame Resistance: Ca117 Section E Class I

This applies only to standard Buro stock. Any customer-specified upholstery may not meet these specifications.

PREVENTATIVE MAINTENANCE & WARNING!

• Use this product only for seating one person at a time.
• Do not use this chair as a step stool/ladder.
• Do not sit on any part of the chair except the seat.
• Do not use this chair on uneven floor surfaces.
• Do not interfere with the operation of the gas lift.
• Do not use a chair unless all bolts, screws and knobs are tight. At least every six months check all bolts, screws and knobs to ensure they are tight.
• If any parts are missing, broken, damaged or worn do not use the product until repairs are made using factory-authorised parts.
• Dispose of packaging properly.
• Plastic bag is not a toy.
• Do not use plastic bag as a head covering as it may cause suffocation.
• Failure to follow these warnings could result in serious injury.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>