SOLFART 9660-6T LED Vanity Lamp Instruction Manual
- June 1, 2024
- SOLFART
Table of Contents
**SOLFART 9660-6T LED Vanity Lamp Instruction Manual
**
LED Vanity Lamp
NOTE:
- Make sure POWER is COMPLETELY OFF at the fuse box
- Have your fixture installed by a qualified licensed electrician
- Prepare everything in a clear area
- Wear gloves at all time during this installation Read instructions carefully before you start assembly Keep this installation sheet for future reference
- Remove fixture from its original package.
- Separate mounting palate from fixture body by removing canopy screws.
- Attach mounting plate to electrical junction box using screws provided in hardware package.
- Secure mounting plate to mounting surface with additional screws.
- Make proper electrical connections (black to hot “L”, white to neutral “N”, ground to “GND”) with wire nuts provided in hardware package.
- Attach mounting plate to holes on fixture body, and then attach using canopy screws.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>