Sven AP-B780MV Wireless Stereo Headphones with Microphone User Manual

: June 9, 2024
: SVEN

Table of Contents

Wireless stereo Headphones with microphone
USER MANUAL
AP-B780MV

Wireless stereo Headphones with microphone

USER MANUAL

AP-B780MV

www.sven.fi

Congratulations on your purchase of the SVEN stereo headphones!

COPYRIGHT
© SVEN PTE. LTD. Version 1.0 (28.06.2022).
This Manual and information contained in it are copyrighted. All rights reserved.

BUYER RECOMMENDATIONS

Shipping and transportation equipment is permitted only in the original container.
Does not require special conditions for realization.
Dispose of in accordance with regulations for the disposal of household and computer equipment.
The date of manufacture of the product is indicated on the box.

APPLICATION

SVEN AP-B780MV wireless stereo headphones with microphone are designed for operation with PC, notebookes and other mobile devices by means of data transfer via Bluetooth protocol. They can be also used in internet telephony, during video conferences, in multimedia applications, in interactive games, for speech recognition and foreign language teaching.

PACKAGE CONTENTS

Wireless stereo headphones — 1 pc
Detachable audio cable with microphone — 1 pc
Power cord USB TYPE-A to USB TYPE-C — 1 pc
User’s Manual — 1 pc
Warranty card — 1 pc

SAFETY PRECAUTIONS

Don’t use the stereo headphones while driving.
Don’t use the stereo headphones at high volume for a long time (more than 15 minutes), as this may cause hearing impairment.

SPECIAL FEATURES

Active noise cancellation system (ANC).
4.1 Bluetooth wireless signal transmission.
Wired connection.
Possibility to control the volume and switch tracks.
Battery operation time up to 17 hours (in ANC mode up to 15 hours).
Operation radius up to 10 m.

Technical support is onwww.sven.fi

DESCRIPTION

(1) Volume up button (short press); Next track (long press, ~ 2 seconds).
(2) ON/OFF button; Call control button; Play/Pause.
(3) Volume down button (short press); Previous track (long press, ~ 2 seconds).
(4) LED indicator.
(5) USB TYPE-C jack for battery charging.
(6) Microphone.
(7) ON/OFF switch of active noise cancellation system (ANC).
(8) Audio cable jack.
(9) LED indicator of active noise cancellation system (ANC).

Fig. 1. Headphones design

CONNECTION AND OPERATION

Attention! The built-in battery must be charged completely prior to the headphones application.

Headset charging

Connect the headphones to a USB port of PC or USB charger using USB TYPE-A to USB TYPE-C cord (included). During battery charging the indicator (4) is red.
When the device is charged in full, the indicator (4) turn blue.
There is a short periodic double beep signal when the battery charge level is low and the LED indicator (4) will be red alternately.
The battery in the headphones is used as an integral part of the device, therefore do not try to extract or replace it, because this can result in the warranty cancellation or the device damage.

Device switching on/off

In order to turn on the headphones press and hold the button (2) before you hear a beep signal. When the device is turned on, the LED indicator (4) will start blinking blue and red (search mode) or blinking blue (connecting mode). In order to turn off the device, press once more and hold the button (2) before you hear a beep signal. When the device is turned off, the LED indicator (4) will blink red.

Control buttons
When connected to a telephone:

in order to receive an incoming call press the button (2); press the button (2) once again to finish the call;
in order to reject the call, press and hold the button (2) (~2 seconds)*;
when the button (2), is pressed shortly twice, the call function of the last number dialed* is switched on;
when the button (2) is pressed long, the headset power off;
reset bluetooth pairing function: While headset is in power off mode please press “+” and “-” together and hold for 3 secs, then power on to complete reset.

Depending on telephone/smartphone configuration.

Active noise cancellation system (ANC)
Active noise cancellation system (ANC) allows to reduce extraneous external noise. Use On/off switch (7) active noise cancellation system (ANC) to reduce noise. If active noise cancellation system (ANC) is on, that indicator (9) lights green.

Bluetooth technology

Wireless data transfer via the Bluetooth protocol enables to connect wireless headphones to compatible devises. Maximum radius of action of data transfer is 10 m. Such obstacles as walls or other electronic devices can interfere with the signal transfer.

Headset to a device interfacing

It is necessary first to interconnect the device with a signal source (see the connection diagram in Fig. 2) to transfer signals via Bluetooth. To do this, turn on the headset, wait for starting the search mode — the LED indicator (4) will alternate blue light with red one.
It is necessary to select the search mode of devices with Bluetooth on a signal source (telephone, notebook, smartphone, etc.). “SVEN AP-B780MV” massage will be displayed on the screen, which is to be connected to*.
If connection is successful, there will be a short beep signal in the headphones; the search mode indication on the headphones is over. If no devices is connected, headphones will turned off automatically in 15 minutes. If the device interfacing has been failed, it is necessary to switch the system in the search mode once more (turn off and on)**.
The indicator (4) on the headphones blinks blue short during the data exchange (listening music) with a device connected via Bluetooth.

You might have to enter “0000” code to connect some models of devices via Bluetooth.
** If the item has been already registered in the device list of a source, then the second search mode activation is not obligatory. Choose only the item name “SVEN AP-B780MV” and the “connect” command on the source.

The use in the wired mode

The device can be used as stereo headphones in the wired mode. In order to connect them to a sound source with the included cable via jack (8). The cable must be connected, order to microphone is close to the headset, than to the sound source.

Sven AP-B780MV Wireless Stereo Headphones with Microphone
F2

Fig. 2. Connection diagram

PC
Mobile device
Headphones

TECHNICAL SPECIFICATIONS

Parameter, measurement unit	Value
Sensitivity, dB	headphones: 105

Notes. Technical specifications given in this table are supplemental information and cannot give occasion to claims. Technical specifications and package contents are subject to change without notice due to the improvement of SVEN production.

Model: AP-B780MV
Importer: Tiralana OY, Office 102, Kotolahdentie 15, 48310, Kotka, Finland.

Manufacturer: SVEN PTE. LTD, 176 Joo Chiat Road, 02-02, Singapore, 427447.
Produced under the control of Oy Sven Scandinavia Ltd. 15, Kotolahdentie, Kotka, Finland, 48310. Made in China.

® Registered Trademark of Oy SVEN
Scandinavia Ltd. Finland.

2B0629

AP-B780MV

Documents / Resources

| Sven AP-B780MV Wireless Stereo Headphones with Microphone [pdf] User Manual
AP-B780MV Wireless Stereo Headphones with Microphone, AP-B780MV, Wireless Stereo Headphones with Microphone, Headphones with Microphone, Microphone
---|---