SEALEY SSP5D Deluxe Gas Welding Goggles Instruction Manual
- June 3, 2024
- SEALEY
Table of Contents
SSP5D Deluxe Gas Welding Goggles
Instruction Manual 
SSP5D Deluxe Gas Welding Goggles
DELUXE GAS WELDING GOGGLES MODEL NO: SSP5D
Thank you for purchasing a Sealey product. Manufactured to a high standard,
this product will, if used according to these instructions, and properly
maintained, give you years of trouble-free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE
OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND
WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE
DAMAGE AND/OR PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE
INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to instructions
SAFETY
Inspect the goggles frequently as a pitted or scratched face shield reduces
vision and should be replaced immediately.
X DO NOT use if any part of the goggles is cracked or broken.
X DO NOT place this product on a hot surface.
Ensure that the goggles are in place before entering the hazard area.
INTRODUCTION
Shade 5 deluxe welding lens with indirect ventilation in the goggle frame. Suitable for gas welding. Conforms to EN 175 & EN 169.
SPECIFICATION
Model No: ……………………….SSP5D
Shade ………………………. 5
ASSEMBLY
NOTE: It is imperative that the goggles fit well and comfortably for the
user or else slippage and discomfort may arise.
4.1. Adjust the headband by pulling/loosening the headband through the buckle.
USE
5.1. Ensure goggles fit comfortably over the eyes. Protection will only be
offered if the goggles are fitted correctly.
5.2. The frame when in contact with the skin may cause allergic reactions to
susceptible individuals. If this is the case doctor’s advice should be
consulted.
X DO NOT apply paint, solvents, adhesives, or self-adhesive labels
except in accordance with the manufacturer.
5.3. The housings of these eye protectors provide less protection against
impact than the lens.
5.4. These goggles may transmit impacts to eyewear enclosed by the goggles.
CLEANING & DISINFECTION
6.1. Rinse in 1% solution of mild detergent and dry with a soft cloth.
X DO NOT use abrasive cleaners
MAINTENANCE
7.1. The goggles should be periodically inspected and cleaned.
7.2. If the lens becomes damaged or scratched the goggles should be replaced.
STORAGE
8.1. Store in a bag or case out of direct sunlight, away from chemicals, away
from hard and abrasive substances, in a clean dust free environment.
Use the original bag for transportation if possible.
SHELF LIFE/EXPIRY DATE
9.1. Under normal circumstances the goggles should offer adequate protection for 5 years.
ENVIRONMENT PROTECTION
** Recycle unwanted materials instead of disposing of them as waste. All
tools, accessories, and packaging should be sorted, taken to a recycling
center, and disposed of in a manner that is compatible with the environment.
When the product becomes completely unserviceable and requires disposal, drain
any fluids (if applicable) into approved containers and dispose of the product
and fluids according to local regulations.
Note: It is our policy to continually improve products and as such we
reserve the right to alter data, specifications, and component parts without
prior notice.
Important: No Liability is accepted for incorrect use of this product.
Warranty:** The guarantee is 12 months from the purchase date, proof of
which is required for any claim.
Sealey Group, Kempson Way, Suffolk
Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
01284 703534
[email protected]
www.sealey.co.uk
© Jack Sealey Limited
Original Language Version
SSP5D Issue 1 11/05/21