MONOGRAM ZK3SN364VRH Stainless Steel Door Panel Kit Instruction Manual

MONOGRAM ZK3SN364VRH Stainless Steel Door Panel Kit

Product Usage Instructions

Installation Instructions:
Before you begin, read the instructions completely and carefully. Make sure to secure the appliance with the anti-tip system before installing the door panel kit to prevent tipping.

Tools and Materials Required:
Phillips #2 bit/driver, M4, M5 hex keys (included with unit) or bits/drivers.

Prep Panel:
Panel brackets are shipped with the refrigerator in the convertible (middle) drawer. Use the M4 machine screws provided with the stainless steel door panel kit to install brackets. Do not tighten screws.

Top Panel Installation:
Install Monogram Statement or Minimalist handles (sold separately). Follow the instructions provided in the handle kit.
Use a small washer for every screw during the installation of J1 and H1 brackets and install the H1/J1 shim beneath the bracket as shown in the illustration.

FAQ:

Q: How do I prevent tipping of the appliance?
A: Secure the appliance with the anti-tip system before installing the door panel kit to prevent tipping.

Q: What tools are required for installation?
A: Phillips #2 bit/driver, M4, M5 hex keys (included with unit) or bits/drivers are required for installation.

Installation Instructions

Before you begin – Read these instructions completely and carefully.

Note to Installer: Be sure to leave these instructions with the Consumer.

Note to Consumer: Keep these instructions with your Installation Instructions for future reference.

WARNING

Tip Over Hazard.
These appliances are top heavy, especially with any doors open, and must be secured to prevent tipping forward which could result in death or serious injury. Read and follow the entire installation instructions for securing the appliance with the anti-tip system before installing door panel kit.

Door Trim Pinch Point Hazard
Improper installation can lead to a finger pinch point hazard between the side door trim and the cabinets when operating the door, especially with children. To minimize this risk you must follow the installation instructions for cabinet dimensions, trim assembly, and door stop angle.

This kit provides for the installation of the Stainless Steel Door Panel Assemblies and Stainless Steel Toe Kicks

Specifications

Tools and Materials Required:
Phillips #2 bit/driver, M4, M5 hex keys (included with unit) or bits/drivers.

PANEL PREP

• Panel brackets are shipped with the refrigerator in the convertible (middle) drawer. Use the M4 machine screws provided with the stainless steel door panel kit to install brackets. Do not tighten screws.
• Install Monogram Statement or Minimalist handles (sold separately). Follow instructions provided in the handle kit.

Follow the remainder of the stainless steel door panel installation instructions in the unit installation instructions to adjust and secure the door panels.

TOE KICK INSTALLATION

• This kit provides a stainless steel toe kick for a single,integrated unit installation. Refer to the unit installation instructions for information on custom toe kicks and stainless steel standard and dual installation toe kicks.

• The toe kick attaches to the refrigerator by using a magnet that can be found in the box of parts that was taped to the side of the unit.

• Adhere magnet to back side of toe kick. The surface of the toe kick where the magnet is to be placed must be clean and free of foreign material.
  Center magnet vertically and horizontally.

• Position toe kick on bottom portion of the front access cover.

Instructions for this kit are also included in the full installation instructions included with the unit.

For the full owner’s manual, visit our website at monogram.com.

References

• Monogram Appliances

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>