TQB Brands BSP100TA Hydraulic Press Instruction Manual

TQB Brands BSP100TA Hydraulic Press

Product Information

Specifications:

• Brand: TQB BRANDS Borum
• Model: BSP100TA
• Type: Hydraulic Press
• Capacity: 100T

Product Usage Instructions

Hydraulic Oil Level:
Ensure the hydraulic oil is at the correct levels as per the owner’s manual. Follow the bleeding instructions provided in the manual available for download on our website.

Lubrication:
Regularly lubricate the press frame, pivots, and sliding ram assemblies following the instructions in the owner’s manual. Refer to the manual available for download on our website for detailed lubrication guidance.

Ram Storage:
Always store the press ram in the fully retracted position to protect it from weather exposure and keep the hydraulic components in good condition.

Bed Positioning:
Adjust the bed height using the winch provided. Secure the bed with pins and release tension on the winch cable to prevent stretching under load.

Job Positioning:
Position jobs correctly on the bed and ensure the ram stroke aligns with the load point to prevent lateral force and overstroke. Use bed pins to secure the job.

Offset Ram Positioning:
For offset pressing jobs, use the crank handle to move the ram across the headstock and center the load cap over the job.

Press Block Usage:
Always use the provided specialty load-rated press blocks for pressing applications to maximize ram capacity. Do not substitute with other items.

User Manual:
Read the user manual thoroughly and keep it easily accessible for reference.

Instructional Resources:
Visit our website for instructional documents and pre-start videos to enhance your understanding of operating the hydraulic press.

Frequently Asked Questions (FAQ):

• Q: Can I use any press blocks with the hydraulic press?
  A: No, always use the specialty load-rated press blocks provided with the Borum press to ensure safe and efficient operation.

• Q: How often should I lubricate the press components?
  A: Follow the lubrication schedule outlined in the owner’s manual, typically lubrication should be done regularly to maintain smooth operation.

How to extend the life

1. Ensure Hydraulic oil is at the correct levels.
   Follow the BSP series relevant owner’s manual bleeding instructions for fluid levels, also available as a download on our webpage at www.tqbbrands.com.au.

2. Lubrication points.
   Keeping your Press frame, pivots and sliding ram assemblies lubricated is essential to providing ease of operation, follow the BSP series relevant owner’s manual for lubrication instructions, also available as a download on our webpage at www.tqbbrands.com.au.

3. Always store the press ram in the fully retracted position.
   Storage in the retracted position ensures the press ram assembly is sealed from exposure to weather fluctuations & keeps the hydraulic ram & pump seals in a relaxed condition ready to work when required.

4. Bed positioning.
   To raise bed height, remove the bed pins then use the winch provided to raise the bed to the ideal height insert the bed pins to secure the bed then loosen the winch cable by winding the winch back 1 full turn to prevent the cable being stretched under load.

5. Job positioning and ram stroke are critical factors when performing pressing jobs.
   Single-piston telescopic Press Rams have their greatest stability from the fully retracted position to 85% of the total extended position. When pressing you should always use the bed to raise the job to the ram then secure it with the bed pins to close the clearance between ram and jobs load point, this greatly reduces the potential of lateral force and accidental ram overstrike .

6. Offset ram positioning.
   Where offset pressing jobs are required position the job on the bed at the most convenient position and use the crank handle in the ram slewing mechanism to move the ram across the headstock to centre the ram load cap over the job .

7. Press block use.
   The Borum presses come with specialty load rated press blocks that should always be used in all pressing applications where maximum RAM capacity can be reached. DO NOT substitute press blocks with any other items.

8. Read the user Manual thoroughly and keep a copy easily accessible.

9. Visit our webpage www.tqbbrands.com.au for instructional documents& pre-start videos.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>