JBL 120 Party Box Club Installation Guide

: June 1, 2024
: JBL

Table of Contents

WHAT’S IN THE BOX
BLUETOOTH PAIRING
PLAY
LIGHTSHOW
APP
MICROPHONE
GUITAR
MULTI-SPEAKER CONNECTION
CHARGING
SPLASH PROOF IPX4
TECH SPEC
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

JBL 120 Party Box Club Installation Guide

WHAT’S IN THE BOX

Power cord quantity and plug type vary by regions.

BLUETOOTH PAIRING

PLAY

Play/pause

LIGHTSHOW

Apply lightshow presets and more with the JBL PARTYBOX app.

APP

Download and install the JBL PARTYBOX app to get more from the product.

JBL PARTYBOX

MICROPHONE

LIGHTSHOW

GUITAR

MULTI-SPEAKER CONNECTION

Speaker Connection

CHARGING

Charging Cable Connection

SPLASH PROOF IPX4

![SPLASH

PROOF](https://manuals.plus/wp-content/uploads/2024/04/Screenshot_13-125.png)
![SPLASH

PROOF](https://manuals.plus/wp-content/uploads/2024/04/Screenshot_14-117.png)

TECH SPEC

Transducers:| 2 x 5.25 inch (133 mm) woofers, 2 x 2.25 inch (57 mm) tweeters| Bluetooth® transmitter frequency
---|---|---
Output power:| 160 W RMS (IEC60268)| range:| 2.4 GHz – 2.4835 GHz
Power input:| 100 – 240 V ~ 50/60 Hz| Bluetooth® transmitter power:| ≤ 18 dBm (EIRP)
Frequency response:| 40 Hz – 20 kHz (-6 dB)| Bluetooth® transmitter modulation:| GFSK, π/4 DQPSK, 8DPSK
Signal-to-noise ratio:| > 80 Db| Supported formats:| .MP3, .WAV, .WMA, .FLAC
Battery type| JBL BATTERY200, Li-ion 34 WH (equivalent to 7.2 V / 4722 mAh)| Input sensitivity:
Battery charge time:| 3.5 hours (speaker off mode|

Aux-In:

| 370 mV RMS (3.5 mm connector)
Music play time| up to 12 hours (varies by volume level and audio content)|

Mic-In:

| 20 mV RMS
Cable type:| AC power cable (type varies by regions)|

Guitar-In:

| 100 mV RMS
Cable length| 2.0 m/6.6 ft|

Bluetooth/USB input:

Note: The product is in compliance with the European Union energy legislation.

Bluetooth connection mode
The product is intended to be used for streaming music via Bluetooth connection. A consumer can stream Bluetooth audio to the speaker. When the product is connected through Bluetooth, the Bluetooth connection must remain active at all times to ensure proper operation. The product will enter sleep mode (networked standby) after 20 minutes without operation. The power consumption in sleep mode is less than 2.0 Watts, after which it can be re- activated via Bluetooth connection.
Bluetooth disconnection mode
The product will enter standby mode after 20 minutes without operation. The power consumption in standby mode is
less than 0.5 Watts.

The maximum operation temperature is 45 °C
No naked flame sources, such as lighted candles, should be placed on the apparatus.

This equipment is a Class II or double insulated electrical appliance

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.