QAZQA 106845 Antigua HL Bronze Vintage Outdoor Wall Lantern Instruction Manual

: June 1, 2024
: QAZQA

Table of Contents

QAZQA 106845 Antigua HL Bronze Vintage Outdoor Wall Lantern
Product Information
Product Usage Instructions
SAFETY INSTRUCTION
INSTALLATION
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

QAZQA 106845 Antigua HL Bronze Vintage Outdoor Wall Lantern

QAZQA-106845-Antigua-HL-Bronze-Vintage-Outdoor-Wall-Lantern-
PRO

Product Information

Specifications:

Model: Antigua HL Bronze 106845
IP Rating: IP44
Voltage: 220-240V~
Frequency: 50Hz
Socket Type: E27
Maximum Wattage: 15W
Dimensions:
- Height: 1058mm
- Diameter: 184mm

Product Usage Instructions

Ensure the lamp is switched to the “OFF” position before installation.
Install the lamp according to the provided guidelines in the user manual.
After installation, insert a bulb with a maximum wattage of 15W into the E27 socket.
Turn the lamp switch to the “ON” position to illuminate the light.
Adjust the lamp position or direction as needed to achieve the desired lighting effect.
To turn off the lamp, switch it back to the “OFF” position.

Frequently Asked Questions (FAQ):

Q: What should I do if the lamp does not turn on?
A: Check if the bulb is properly inserted and functional. Ensure that the power supply is connected and the switch is in the “ON” position.
Q: Can I use a bulb with a wattage higher than 15W?
A: No, using a bulb with a wattage higher than the specified maximum may damage the lamp and pose a safety hazard. Stick to the recommended wattage.
Q: How do I clean the lamp?
A: Switch off and unplug the lamp before cleaning. Use a soft, dry cloth to gently wipe the lamp surface. Avoid using harsh chemicals or abrasive materials.

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product
Please keep this user manual for further reference

The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
Exterior lighting must not be installed during rain.
Take account of the minimal separation distance from other objects and the room required around the fitting.
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
Take account of all available technical information.
Meaning of symbols:
This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
Take note of the symbols when connecting wires: