GE APPLIANCES GE40L08BAM 36 Gallon Top Port Lowboy Electric Water Heater Installation Guide
- June 1, 2024
- GE Appliances
Table of Contents
GE APPLIANCES GE40L08BAM 36 Gallon Top Port Lowboy Electric Water Heater
Product Information
- Specifications:
- Model: GE40L08BAM
- Dimensions: 33-5/8 x 27 x 32-3/4 inches
- Power Requirements: 240V/60Hz/30A min. dedicated
- Material: Copper High density
- Heating Element: 5,500 watts
- Energy Factor: 0.92
- Pressure Range: 20-125 PSI
- Warranty: 8 years
Product Usage Instructions
- Installation:
- Before installing the water heater, ensure compliance with local installation regulations and codes. Refer to the installation instructions provided with the unit for detailed guidance.
- Power Supply:
- Verify that the power supply matches the requirements indicated on the rating plate of the water heater.
- Location:
- Place the water heater in a clean, dry area close to the point of highest hot water demand to minimize energy and water wastage due to long uninsulated hot water lines.
- Clearances:
- Ensure adequate clearance around the water heater for servicing. Maintain clear access to controls, drain, and other operational components. Additional clearance may be needed for earthquake straps.
- Typical Installation:
- Follow the typical top-connect installation as illustrated in the manual.
- Ensure proper electrical connections, hot water outlet connections, thermal expansion tank installation (if required), shut-off valve, cold water supply, temperature & pressure relief valve, and drain valve.
FAQs
- Q: Where can I find the warranty details for GE40L08BAM?
- A: The warranty details can be found in the written warranty provided with the product.
- Q: What is the household sizing recommendation for this water heater?
- A: The household sizing is based on back-to-back showers, each lasting 8 minutes.
DIMENSIONS AND INSTALLATION
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
- LOCAL INSTALLATION REGULATIONS: This water heater must be installed in accordance with these instructions, local codes, utility codes, utility company requirements or, in the absence of local codes, the latest edition of the National Electrical Code. It is available from some local libraries or can be purchased from the National Fire Preventions Association, Batterymarch Park, Quincy, MA 02169 as booklet ANSI/NFPA 70.
- INSTALLATION INFORMATION: For complete information, see the installation instructions packed with your water heater.
- POWER REQUIREMENTS: Check the markings on the rating plate of the water heater to be certain the power supply corresponds to the water heater requirements.
- LOCATION: Locate the water heater in a clean dry area as near as practical to the area of the greatest heated water demand. Long uninsulated hot water lines can waste energy and water.
- REQUIRED CLEARANCES: There must be sufficient clearance between any object and the top, rear and sides of the water heater in the event service is needed. The controls and drain at the front of the unit must have clear access for operation and service. Installations that require minimal clearance on the sides or rear of the water heater for earthquake straps are also acceptable. In these cases, additional clearance should be provided on the opposite side of the unit to allow for service access.
CONNECT INSTALLATION
TYPICAL TOP CONNECT INSTALLATION
The above illustration is intended for dimensional reference only. Refer to the photograph for the actual product appearance
- See http://info.nsf.org/Certified/Lead_Content/ for specific model listing
FEATURES AND BENEFITS
- Top Port Lowboy – Make the most of tight spaces with a water heater that fits where height is a concern.
- Household Size – Provide hot water for the whole family of 2 to 4 persons.
- Quick Recovery – Two 5500W heating elements quickly increase water temperature for hot water when you need it.
- High First Hour Delivery – Live comfortably with this best-in-class unit that delivers 61 gallons of hot water in the first hour (Measured through DOE First Hour Rating).
- Inlet Tube – Replenishes water from the bottom of the tank to maximize hot water delivery.
- Easy Set Up – Replace your old water heater quickly and easily using standard water and electrical connections.
- Anode Rod – Durable design offers long-lasting protection against corrosion.
- Drain Valve – Rust-proof construction can be counted on to provide long-lasting service.
- Adjustable Thermostat – Change the temperature to your desired setting.
- Warranty – 8-year Limited Parts Warranty*.
- Model GE40L08BAM – Diamond Gray
See written warranty for details
| Rated capacity (gallons) | 36 |
|---|---|
| Nominal capacity | 36 |
| Product application | Residential |
FEATURES
Family size*| 2-4
Control type| Thermostat
Temperature setting| 90-150° F
Temperature setting factory default| 120° F
Drain valve type| Plastic
WEIGHTS & DIMENSIONS
Height to water connection (in.)| 33-5/8
Tank dimensions (diameter x height) (in.)| 27 x 32-3/4
Connection sizes—hot water outlet (MNPT)| 3/4”
Connection sizes—hot water inlet (MNPT)| 3/4”
POWER/RATINGS
The electrical circuit directly wired| 240V/60Hz/30A min. dedicated
Heating elements| Copper
Heating element density| High density
Lower element (watts)| 5,500
Upper element (watts)| 5,500
Energy factor| 0.92
First Hour Rating (FHR) (gallons)| 61
Operating water pressure| 20-125 PSI
WARRANTY
Parts warranty| 8 years
For answers to your GE Profile” or GE Appliances product questions, visit our website at geappliances.com. or call GE Answer Center® Service, at 800.626.2000.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>