QAZQA 95904 Kansas Industrial Outdoor Hanging Lamp Instruction Manual

June 1, 2024
QAZQA

QAZQA 95904 Kansas Industrial Outdoor Hanging Lamp

Product Information

Specifications:

  • IP Rating: IP44
  • Input Voltage: 220-240V~
  • Frequency: 50Hz
  • Lamp Holder: E27, Max. 60W
  • Model Numbers: Kansas HL 95904 / 106825 / 107710 / 107712

Product Usage Instructions

  1. Safety Precautions:
    Before installing or using the product, please read the instruction manual carefully and follow all safety guidelines.

  2. Installation:
    Make sure the power supply is switched off before installation. Connect the live wire (Brown or Red), earth wire (Green & Yellow), and neutral wire (Blue or Black) to their respective terminals.

  3. Mounting:
    Mount the product securely according to the provided overall sizes. Ensure proper support and stability.

  4. Power On:
    After installation is complete, switch on the power supply and test the product to ensure it functions correctly.

  5. Maintenance:
    Regularly check for any signs of damage or wear and tear. Clean the product as needed using a soft, dry cloth.

FAQ (Frequently Asked Questions)

  • Q: What should I do if the product does not turn on after installation?
    A: Check the power supply connection and ensure the wires are properly connected to the correct terminals. If the issue persists, contact customer support for assistance.

  • Q: Can I use a higher wattage bulb than the specified maximum?
    A: It is recommended to adhere to the maximum wattage limit to prevent overheating and potential hazards. Using a higher wattage bulb may damage the product.

**Safety Precautions

QAZQA-95904-Kansas-Industrial-Outdoor-Hanging-
Lamp-fig-1**

Kansas HL
95904 / 106825 / 107710 / 107712

INSTRUCTION

QAZQA-95904-Kansas-Industrial-Outdoor-Hanging-Lamp-
fig-2 QAZQA-95904-Kansas-Industrial-
Outdoor-Hanging-Lamp-fig-3SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference

  1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
  2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
  3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
  4. Exterior lighting must not be installed during rain.
  5. Take account of the minimal separation distance from other objects and the room required around the fitting.
  6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
  7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
  8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on ell electrical components
  9. Take account of all available technical information.
  10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Closs I: the fitting must be earthed
    • Protection Class II: the fitting is doubled insulated and does not require earthing
    • Protection Closs Ill: the fitting is low voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltage.
    • The luminoire can be used in combination with a dimmer
    • The luminoire con be dimmed bywoll switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed together with normal domestic waste in standard rubbish con, but you have to bring it to a staging area for electrical waste
  11. Take note of the symbols when connecting wires

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert,
The Netherlands
www.qazqa.nl

FittinQ LTD
55 Baker Street,
London, W1U 7EU
United Kingdom

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals