QAZQA Facil WL Industrial Wall Lamp Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA Facil WL Industrial Wall Lamp

Safety Precautions
Facil WL

Overall size

SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before
installing or using this product.
Please keep this user manual for further reference
-
The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
-
Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
-
The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
-
Exterior lighting must not be installed during rain.
-
Take account of the minimal separation distance from other objects and the room required around the fitting.
-
If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
-
Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
-
Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
-
Take account of all available technical information.
-
Meaning of symbols:
This icon indicates
the level of water-proof and dust-proof
Protection Class I
: the fitting must be earthed
Protection Class
11 : the fitting is doubled insulated and does not require earthing
Protection Class
111 : the fitting is low voltage
Minimum distance from
lighted objects (meters)
The type of lamp and
maximum size and wattage indicated in each lighting unit must not be exceed;
different items require different kind of light sources with different bulb
icons
The armature is
designed to work only with the indicated voltage. Different items require
different working voltage .
The luminaire can be
used in combination with a dimmer
The luminaire can be
dimmed by wall switch
The reference light
angle and light space of the luminaire

This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste -
Take note of the symbols when connecting wires :
| L| Live conductor
---|---|---
| Earth conductor
N| Neutral conductor
CUSTOMER SUPPORT
FittinQ B.V.
Smarag dweg 52, 5527 LB Hapert,
The Netherlands
www.qazqa.nI
FittinQ LTD
55 Baker Street,
London, Wl U 7 EU
United Kingdom


References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>