Shelly H&T Gen 3 Mocha Wi-Fi and Bluetooth Temperature Instruction Manual
- June 1, 2024
- Shelly
Table of Contents
Shelly H&T Gen 3 Mocha Wi-Fi and Bluetooth Temperature
Product Information
Specifications:
- Product Name : Shelly H&T Gen3
- Control : Shelly Smart Control
- Display Units : Celsius (default), can be changed to Fahrenheit
Product Usage Instructions
Waking the Device:
- Open the device.
- Press the Reset button.
Changing the Temperature Units:
- Open the Shelly Smart Control app.
- Tap the Room where the H&T Gen3 is located.
- Tap the Shelly H&T Gen3.
- Tap the Sensor settings button represented by an icon displaying the device and a gear.
- Tap Temperature units.
- Wake the device as explained in the previous section of this document.
- Tap the back arrow in the Smart Control app.
- The device displays the temperature in Fahrenheit.
FAQ
- Q: Can I switch back to Celsius after changing to Fahrenheit?
- A : Yes, you can switch back to Celsius by following the same steps but selecting Celsius as the temperature unit.
- Q: Do I need to wake the device every time I change the temperature units?
- A : It is recommended to wake the device before making any changes to ensure proper functionality.
Using Shelly Smart Control to change the Display Units on a Shelly H &T Gen3 to Fahrenheit.
Introduction
By default, the Shelly H&T Gen 3 displays the temperature in Celsius. Use the following steps to change the displayed temperature units from Celsius (°C) to Fahrenheit (°F).
Waking the Device
Before changing the temperature units displayed on the device, it is recommended to wake the device. To wake the device,
- Open the device.
- Press the Reset button.
Changing the Temperature Units
- Open the Shelly Smart Control app.
- Tap the Room where the H&T Gen3 is located.
- Tap the Shelly H&T Gen3.
- Tap the Sensor setting button represented by an icon displaying the device and a gear.
- Tap Temperature units.
- Tap the °F button. A message is displayed: Setting saved successfully. The device is currently sleeping. It will update once it wakes up.
- Wake the device as explained in the previous section of this document.
- Tap the back arrow in the Smart Control app.
- The device displays the temperature in Fahrenheit.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>