LesoRocity D2303 Dog House Heater User Manual
- June 1, 2024
- LesoRocity
Table of Contents
LesoRocity D2303 Dog House Heater
Product Information
Product Specifications
- Model Number: D2303
- Rated Voltage: 120V/60Hz
- Rated Power: 500W
- Product Dimensions: 9.16.44.7 in (230163118mm)
Product Usage Instructions
Installation:
- Use the screws provided to fix the hanging board parallel to the pre-installed position of the equipment.
- Choose a suitable location on the wall and drill a hole at least 20mm in diameter for the power cord to pass through.
- Pass the power cord through the drilled hole and hang the controller in a suitable place (ensure it is waterproof to IP55).
Usage Guidelines:
- Ensure the heater is not covered by any objects during use.
- Do not alter the heater or cord as it can increase the risk of fire.
- Avoid covering the air outlet and inlet, and keep flammable materials at least 1 meter away from the heater.
- Avoid placing the heater near other heat sources or flammable materials.
- Avoid placing the heater near natural gas, gas pipelines, paint, or flammable liquids.
- Avoid touching the heater with bare skin and do not move it when hot.
- Avoid covering the heater with clothing or foreign objects.
- Avoid inserting foreign objects into the air inlet or outlet.
- Do not immerse the heater in water or let water enter inside it.
- Clean the heater regularly to prevent overheating due to dust accumulation.
- Avoid installing near windows with curtains to prevent electric shock or fire hazards.
Frequently Asked Questions (FAQ):
-
Q: Can I use this heater with a different voltage than specified?
A: No, this Dog House Heater can ONLY be used with the voltage specified on the nameplate (120V~60Hz). -
Q: What should I do if the heater fails?
A: If the heater fails, please contact us promptly or send it to a qualified service station for repair. -
Q: How do I ensure proper temperature control in my dog’s house?
A: Fix the temperature control probe inside the dog house to detect and regulate the temperature effectively.
- Please read this manual carefully before use.
- The company reserves the right to interpret the instructions.
- The appearance of the product is subject to the actual product.
Safety Warning
- To prevent the occurrence of danger, please make sure that the heater is not covered by other objects when used.
- To serve you better, please read this manual carefully before use and keep it properly for future maintenance.
- It is normal for the peculiar smell to start up for the first time, and it will volatilize within a few minutes after starting up. Please feel free to use it.
- This Dog House Heater can ONLY be used with the voltage specified on the heater’s nameplate(120V~60HZ).
- DO NOT alter the heater or cord in any way, this greatly increases your risk of fire and voids all warranty.
- When installing, placing, and using the electric heater, please DO NOT cover the air outlet and inlet of the electric heater, and ensure that the flammable materials are more than 1 meter away from the electric heater to avoid the electric heater from overheating and causing a fire.
- Please DO NOT place the electric heater close to other heat sources.
- Please DO NOT use this electric heater in the following places: near natural gas or gas pipelines, near the use and storage of paint or other flammable liquids.
- To avoid burns during or after the use of this heater, please DO NOT let your bare skin touch it; if you need to move it, please turn it off and wait for its surface to cool down.
- Please DO NOT cover the heater with clothing or other items.
- Please DO NOT put any foreign objects or metal objects into the air inlet or outlet of the dog house heater, as this may cause electric shock, fire, or damage to the heater.
- Please DO NOT immerse the heater in water or let water enter the inside of the electric heater, which may cause electric shock.
- If the heater fails, please contact us in time or send it to a qualified service station.
- Please DO NOT touch the electric heater when your hands are wet.
- The most common cause of overheating of the electric heater is the accumulation of dust or fluff. Please make sure to clean the electric heater regularly when it is not powered on.
- Please DO NOT install electric heaters next to windows with curtains to prevent electric shock or fire.
- Please DO NOT use frosted materials to clean the electric heater. The electric heater can be cleaned with a cloth soaked in hot soapy water and wrung out. Before cleaning the heater, make sure that the heater is powered off.
- Please DO NOT switch on the power supply before the heater is fully installed or adjusted.
- This dog house heater is not suitable for use in exposed outdoor or humid places.
- Please DO NOT use it next to bathtubs, showers, swimming pools, or other liquids.
- Fix the electric heater on the wall or install it in the correct position, also keep the heater upright.
- Please DO NOT wind up the power cord during use to avoid heat build-up in the power cord, which may cause danger.
- The power extension cord is not recommended for this electric heater.
- Please make sure to cut off the power supply when the heater is not in use.
- Please keep the power cord and fixed cables away from the high-temperature surface of the heater.
- Please DO NOT wrap the power cord somewhere or twist the power cord into a bundle, which may cause the insulator of the power cord to weaken or fail. Please make sure that the power cord does not come into contact with any sharp objects.
- Please DO NOT store the heater without cooling.
- Please DO NOT install the electric heater under the electrical outlet.
- To avoid the possibility of electric shock or fire, please ensure that the power cord and electric heater are not exposed or immersed in rain or any other liquid.
- Please use the heater by these instructions. To avoid causing fire, electric shock, or injury, do not use other manufacturer’s product instructions for use with this dog house heater.
Product List
Product Specifications
| Model Number: D2303 | Rated Power: 500W |
|---|---|
| Rated Voltage: 120V/60Hz | Product Dimensions: |
- 9.16.44.7 in
- 230163118mm
- A: First, use the screws in the accessory bag to fix the pegboard parallel to the pre-installed position of the equipment. It is recommended that the optimal height for installation is greater than the height of the pet.
- B: Choose the best location on the wall (near the end of the power cord) and drill a hole at least 20 mm in diameter to ensure that the power cord can pass through this hole.
- C: Please pass the power cord through the drilled hole, and then hang the controller in a suitable place. Then hang the controller in a suitable place (the controller is waterproof to IP55, try to avoid long-term use in the rain).
- D: Installation of the controller power cord: connect the power cord with the host power hole, and then tighten the nut on the power cord clockwise.
- E: Hang the equipment according to the corresponding holes, and the heating device can be used normally after the power is turned on.
Product Features
| Heating | Shutdown Timer |
|---|---|
| Temperature Adjustment | Smart Wifi Function |
Operation Guide
After powering on, the buzzer will sound once and enter the standby.
- Power button “ ”
- In standby mode, press the power button “ ” (quick response) to enter the working state, the digital screen shows the ambient temperature.
- In the working state, press the power button “ ” (response after release) and then enter the shutdown state.
- Temperature adjustment key “ ” “ “
- Press “ ” or “ ” in normal operation, the set temperature will be displayed and flashing, and the temperature unit symbol C or F will light up, and enter the temperature setting mode. At this time, the temperature setting can be adjusted by pressing the key” ” or “ “, The temperature is set cyclically within the range of 5 ℃-45 ℃, and after three seconds of no operation, confirm and exit the temperature adjustment mode to display the ambient temperature. When the set temperature is higher than the ambient temperature, the product starts to heat and the heating symbol 3 lights up. When the temperature is lower than the ambient temperature, the product stops heating, and the heating symbol 3 goes out. Set the temperature with the power-down memory function;
- Set key “ ”
- Long press “ ” for three seconds to enter the C/ F icon switch, and the ambient temperature value switch.
- In the working state, long press “ ” for three seconds to enter the timer shutdown mode, the icons , and flash (do not affect the display of other icons), and the temperature adjustment key “ ” or “ ” 0H-24H cycle increases and decreases the adjustment time. After three seconds of inactivity, it will automatically confirm and return to the environment display window.
- Combination key “ ” “ “
- Press “ ” “ ” at the same time to turn on or cancel the child lock in working condition.
- Press “ ” for five seconds to reset the WiFi, the WiFi symbol is always on when the WiFi connection is successful, and it flashes when it is not connected.
Note:
- EE: The product host is not well connected to the controller.
- E1: Poor connection of temperature probe.
Download The App
- Please download “Smart Life” from the App Store.
- You can also scan the QR to download the APP.
Add The Device
Please follow the APP prompts to connect the Dog House Heater. If it fails, please Long press the button for 5S until the flashes and try to reconnect again.
App Operation
You can scan the QR code to watch the APP’s detailed operation instructions.
Note:
For the sake of environmental protection, we have already canceled the APP
paper manual, please scan the code and check!
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, under Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used by the instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be installed and operated with a minimum 20cm distance between the radiator and your body: Use only the supplied antenna.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>