QAZQA 105892 Go SL Design Plafondspot Instruction Manual

QAZQA 105892 Go SL Design Plafondspot

Product Specifications

• Model: LED G9
• Max Power: 3W
• Variants:
  • Go SL 105890
  • Go SL 105891
  • Go SL 105892

Product Usage Instructions

Installation:

1. Identify the variant of the product you have (105890, 105891, or 105892).
2. Choose the appropriate mounting location for the light fixture.
3. Ensure the power source is turned off before beginning installation.
4. Securely mount the fixture according to the provided dimensions for your specific variant.
5. Connect the wires following standard electrical practices.
6. Insert the correct number of G9 bulbs into the fixture.
7. Turn on the power to test the light.

Maintenance:
Regularly clean the fixture and bulbs with a soft, dry cloth to maintain optimal lighting performance.

Warnings:

• Do not exceed the maximum power rating of 3W.
• Avoid direct contact with the illuminated bulbs as they may be hot during operation.

Contact Information :

• FittinQ B.V. – Smaragdweg 52, 5527 LB Hapert, The Netherlands – Website: www.qazqa.nl
• FittinQ LTD – 55 Baker Street, London, W1U 7EU United Kingdom

Frequently Asked Questions (FAQ):

• Q: What should I do if the light does not turn on?
  A: Check the power source, ensure the bulbs are properly inserted, and verify that the fixture is securely mounted and wired.

• Q: Can I use bulbs with higher wattage than 3W?
  A: No, using bulbs with a higher wattage than specified may damage the product and pose a safety hazard.

• Q: How do I clean the fixture?
  A: Use a soft, dry cloth to gently wipe down the fixture and bulbs. Avoid using water or cleaning solutions.

Safety Precautions

Go SL 105890/105891/105892

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.
2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
4. Exterior lighting must not be installed during rain.
5. Take account of the minimal separation distance from other objects and the room required around the fitting.
6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
9. Take account of all available technical information.
10. Meaning of symbols:
    • This icon indicates the level of water-proof and dust-proof
    • Protection Closs I: the fitting must be earthed
    • Protection Class II: the fitting is doubled insulated and does not require earthing
    • Protection Closs Ill: the fitting is low voltage
    • Minimum distance from lighted objects (meters)
    • The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
    • The armature is designed to work only with the indicated voltage. Different items require different working voltage.
    • The luminoire con be used in combination with a dimmer
    • The luminoire con be dimmed bywoll switch
    • The reference light angle and light space of the luminaire
    • This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
11. Take note of the symbols when connecting wires:

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert,
The Netherlands
www.qazqa.nl

FittinQ LTD
55 Baker Street,
London, W1U 7EU
United Kingdom

References

• QAZQA - Quite Unique | QAZQA

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>