BEABA 930330 Zen Premium Baby Video Monitor Instruction Manual

: June 3, 2024
: BEABA

BEABA 930330 Zen Premium Baby Video Monitor

WELCOME
Thank you for buying our ZEN Premium baby video monitor. You will soon be able to see and hear your baby remotely. But firstly, we invite you to read these instructions carefully in order to use our product in the best possible conditions and keep it for as long as possible.

WARNINGS AND PRECAUTIONS FOR USE

Read and keep these instructions. Take account of all the warnings.

WARNINGS

TO AVOID THE RISK OF STRANGULATION, IT IS ESSENTIAL TO CHECK THAT BABY CANNOT REACH THE ADAPTOR’S WIRE. PLACE THE ADAPTOR AT LEAST 1 METRE FROM THE CHILD.

ATTENTION: to avoid the risk of explosion, electric shocks, short- circuits, and overheating:

Do not immerse the Parent or Baby unit or the charger in water and do not clean it under the tap.
Keep the battery away from strong heat sources, such as radiators, heating systems, ovens, cookers or other appliances that produce heat.
To avoid overheating, do not cover the baby monitor with a towel, a blanket, or any other object.
Do not touch the plug’s connectors with sharp or metal objects.

The baby unit’s adapter may become hot when used constantly. This reaction is normal and should not alarm you.

PRECAUTIONS FOR USE

Use this appliance only for the purpose described in this manual.
Position the baby unit in such a way as to have the best view of your baby in his or her cot. Place it on a flat surface, such as a chest of drawers, a desk or a shelf.
For improved performance of your baby video monitor and in order to reduce interference, we recommend that you do not connect other electrical appliances to the same power socket as your baby video monitor. (Do not use multi-socket adapters).
Before plugging the baby video monitor into the mains, make sure that the voltage indicated on the baby video monitor adapters corresponds to the mains voltage. Do not plug in the camera near 2.4Ghz frequency appliances (Wi-Fi or Bluetooth).
If the Parent unit is not being used, switch it off via the power button (ON/OFF). If the Child unit is not being used, unplug it.
The product must be installed by adults. Keep small parts out of the reach of children during assembly.
Adult supervision
The baby video monitor is designed to offer assistance and ensure additional peace of mind. It must not be seen as a medical device or as a substitute for adult supervision. It may not in any case replace the responsible and appropriate supervision of an adult: it is strongly advised that an adult checks baby regularly in addition to the use of the baby video monitor.
Never leave the house if your child is alone, even for a short while.
Never place the baby unit inside the cot or playpen.3
For their safety, do not allow children to play with the baby video monitor.

Storage precautions

Use and store the baby video monitor in a place where the temperature is between 10° C and 35 ° C.
Keep the baby monitor out of direct sunlight.
If you think that the battery is damaged, stop using the product.
Contact BEABA’s aftersales service for assistance. Never use a product with a damaged battery.
Do not store the adapter cable in a place where it might wear quickly (humidity/heat, etc.).

Replacing equipment

Use the battery supplied for the parent unit. Only use the accessories supplied by the manufacturer.
If needed, you can use the same type of adapter supplied.

PRODUCT VIEW

A. Camera (Baby unit)
B. Receiver (Parent unit)
C. USB cables x 2
D. 5V DC / 1A mains adapters (one for the parent unit, one for the child unit)
E. Screws
F. Support
G. Tilting accessory
H. Manual
I. Reset pin

BEFORE USE

a Baby unit
Plug the baby unit (camera) into the mains placing it at least 1 metre from your baby’s head and up to 2.5 metres from baby in order to enjoy good picture quality. The baby unit must be plugged into the mains to work since it does not have a battery.
b. Parent unit
If you are switching on the parent unit for the first time, it must first be plugged into the mains for 8 hours using the adapter supplied (5V DC/1 A USB) to charge it. If the parent unit is already changed, you can switch it on and use it without plugging it in and benefit from 8 hours of autonomy thanks to the Lithium battery.
c. Connecting the two units and distance of use
When the Parent and Baby units are switched on, they connect automatically and the two units are paired immediately. The connection light on the Parent unit is symbolised by the «network signal» pictogram on the top left of the screen. When the Parent unit and the Baby unit are paired, the signal strength indicator shows the maximum number of bars, namely 4. The connection is established. Otherwise, the signal strength indicator does not show any bars and the message «No Link» is displayed.

DESCRIPTION CAMERA – CHILD UNIT

BEABA-930330-Zen-Premium-Baby-Video-
Monitor-23

DESCRIPTION RECEIVER – PARENT UNIT

BEABA-930330-Zen-Premium-Baby-Video-Monitor-04

INSTALLING

Install the camera on a flat surface
If necessary, use the support (F) supplied to install the camera.

Or use the tilting accessory (G) for a better angle. This small raised base will allow you to enjoy a better angle when the camera is tilted downwards. BEABA-930330-Zen-Premium-Baby-Video-
Monitor-07

GENERAL SETTINGS

Adjusting the brightness:

1. Press the Menu button on the display screen, select
2. Press the up and down buttons to adjust the brightness.

Set the time: :

1. Press the Menu button on the display screen, then select 
2. Press the direction buttons to change the date, time and time display mode.

Set the language:

1. Select the language of your choice.

Adjust the sound

1. You can set the sound to mute the parent unit. Press the Menu button and select then with the direction buttons turn the sound down to maximum. You will only receive visual alarms if there are crying and movement detections.

Set sleep mode:
You can set sleep mode to increase autonomy.

1. Press the Menu button on the display screen and select Sleep mode.
2. Select the sleep mode: 1 minute, 5 minutes, 10 minutes, 30 minutes, 60 minutes or press «off» to deactivate it.

*SD card:**

1. SD card* may be inserted into the receiver and/or the camera. The SD card* in the receiver will allow you to record photos and videos on the receiver – see the PARENT UNIT INTERFACE (RE-CEIVER) section and the following points in the section «SD Card*» section for further details.
2. The SD card* in the camera enables automatic recording when motion or noise is detected. You will receive a notification on your phone and can view the alert history. To explore the features of the application in further details, you can refer to the FAQ section of the Zen connect app.
3. Press the Menu button on the display screen, then select Manage the SD card*
4. You will be able to view the total capacity and the remaining capacity of your SD card*.
5. You can format the SD card* according to your needs but make sure that you have saved any important data.
6. If no SD card* is inserted, you will see the following message «No SD card* detected».

*(SD card not supplied)

Updating:
Make sure that your camera is connected to a 2.4 Ghz Wi-Fi network.
You can update your camera when the «Update» notification appears. Or press Menu on the display screen, then select Version information to check whether an update is available
Low battery alarm:
When the screen’s battery is low, the low battery alarm is displayed on the screen. Please recharge the screen as soon as possible.

CONNECTING
Plug in the camera and switch on the receiver, By default the camera is paired with the receiver, if the camera does not appear, follow the procedure described below. The operating distance of the monitor is limited and depends on the nature of the walls in the house as well as the distance. If the range is insufficient in some rooms, use the application on a smartphone to access the camera from anywhere.

Reconnect the camera to the receiver
1. Press the Menu button on the display screen, then select Manage cameras.
2. Press and hold the pairing & call button until you hear a short sound.
3. Press the OK button on the receiver to start pairing.
To disconnect the camera from the receiver:
1. ```
  1. Press the Menu button on the display screen, then select Manage cameras.
```
2. Press and hold the OK button on the display screen to stop the connection.

Connect the camera to the telephone Step 1:
Open the BEABA ZEN CONNECT app and select “REGISTER”. Enter a valid email address and accept the general terms and conditions of use. Then press “NEXT”. Step 2:
Enter a username and a password that will be used for your connection on the app then press “CONFIRM”.

Pairing the camera
Some notifications before adding the device:

This device only supports a 2.4 GHz Wi-Fi router, check that you have a Wi-Fi router and a 2.4 GHz band connection.
Follow the instructions and check that the password has been entered correctly.
Only one device at a time can be added to the app’s account. If the device has already been added to another account, it cannot be added to another account.

Step 1:
Open the BEABA ZEN CONNECT app and select “+” to add a camera. Step 2:
Follow the different camera pairing steps on the app. Check that the light indicator is fl ashing red and that the tone can be heard when scanning the QR code Step 3:
If the device is detected by the app, just add it and press finish to see it appear in the “MY DEVICES” category. Just select the device in question to see the video appear on your screen.

Note:
If you experience difficulties with pairing, refer to the FAQ available on the app (My account > Help and comments > Help).
To explore the features of the application in further details you can refer to the FAQ of the application.

PARENT UNIT INTERFACE (RECEIVER)

You can adjust the camera’s position using the receiver or the mobile app. On the receiver using the direction buttons, on the mobile app with the «Rotation» button. Photo & Video*

PARENT UNIT INTERFACE (RECEIVER)

You can adjust the camera’s position using the receiver or the mobile app. On the receiver using the direction buttons, on the mobile app with the «Rotation» button.

**Photo & Video***

Take a photo:
You can take a photo when you want to keep a picture of your baby.
Press the Menu button on the display screen, then select and press OK to take a photo.
Record a video:
You can record a video when you want to save a special moment of your baby.
Press the Menu button on the display screen, then select and press OK to record a video.

View the photos and videos taken:

Press the Menu button on the display screen, then select and press OK to enter the interface. (function only available with a SD* card)
Select the camera and the date, then the photo or video you want to view, and press OK to enter the viewing mode.

For a video, press OK to read it or pause it in viewing mode.
Press the back button to quit viewing mode and return to the main menu.

These options are available only if you insert a SD card in the slot on the receiver provided for this purpose. Micro SD* card not supplied.

Play music
You can play music to soothe your baby.
Several pieces of gentle music are available.
Press the Menu button on the display screen, then select and press OK to enter the interface.
You can select different music, change music, the music cycle and adjust the music’s volume

Feeding Reminder

You can add meal reminders.

Press the Menu button on the display screen and select
Press the direction buttons and select one of the 4 time options. Press OK to start setting the time.
To set meal reminders, press the left and right and up and down buttons to update the hours, minutes and seconds.
Press OK to save the settings.
You can activate or deactivate meal reminders. You can also define up to 4 meal reminders a day. When the programmed time is over, an notification is displayed on the screen.

DETECTION OF HUMIDITY

You can monitor the temperature and humidity of your baby’s bedroom in real time. When the temperature and humidity differs from those you have defi ned, you will receive a notification.

Press the Menu button on the display screen, then select detection.
Press the up and down buttons to select the desired temperature and humidity.
When you start to configure an option, press the left and right buttons to change option and press the up and down buttons to change the values and units.
Press OK to save the settings.
Beyond standard values notification: please activate it if you want to receive a notification when the temperature and humidity are not conform to the values you have chosen.

VOX FUNCTION (smart alarms)

You can activate the VOX FUNCTION to detect your baby’s movements, sounds and crying.

Press the Menu button on the display screen and select
Press the up and down buttons to choose between movement detection, sound detection, crying detection and volume, then select OK to start adjusting.
When you start to configure a detection mode, press the left and right buttons to change option and press the up down buttons to adjust the sensitivity.
To adjust the volume of the alarm, press the left and right buttons.
Press OK to save the settings.
An alarm is triggered when detection is activated. Press OK to stop the alarm. It is possible to set the volume to zero, the alarms will only be visual and the unit will automatically wake up from standby in case of an alarm.

TROUBLESHOOTING – FAQ

BEABA-930330-Zen-Premium-Baby-Video-Monitor-31

CLEANING AND MAINTENANCE

Warning Never use chemical cleaners, sprays or liquid detergents. – Before cleaning, all the mains adapters must be unplugged – Make sure that your hands are dry before inserting or replacing the battery – Clean the baby video monitor only with a damp cloth.

ENVIRONMENT AND RECYCLING –

This device has been designed and manufactured with high-quality materials and components such as Lithium batteries that can be recycled and reused. – Do not dispose of this product with ordinary household waste. Seek information about the provisions in force in your region concerning the separate collection of electrical and electronic appliances. Take this product to a collection point for the recycling of electrical and electronic equipment.

WARRANTY

The BEABA ZEN PREMIUM baby video monitor benefits from a 24-month warranty from the date of purchase. During this period, we guarantee the free repair of any defect resulting from a material defect or a manufacturing defect. This warranty is subject to the final evaluation of the importer. If you require assistance or additional information, consult the Beaba website or contact the Beaba consumer service.

If you notice a fault, start by consulting the user manual.
In the absence of a clear answer in the manual, contact this baby video monitor’s supplier via the website www.beaba.com.

INVALIDATION OF THE WARRANTY

In the case of inappropriate use, a connection error, the use of non-original parts or accessories, negligence, and in the case of faults caused by humidity, fire, floods, lightning, or natural disasters;
In the case of unauthorized modifications and/or repairs by third parties;
In the case of the unsuitable transport of the device without appropriate packaging, as well as
in the case of this warranty card or proof of purchase being absent. The warranty does not cover connection cables and batteries. All other responsibility, in particular in terms of indirect damages, is excluded. For further information, download the Beaba & Moi app on the App Store or Google Play