FIELDCONTROLS FCPV Fresh Command Ventilation System Owner’s Manual

FIELDCONTROLS FCPV Fresh Command Ventilation System

DESCRIPTION

The FCPV is an intelligent, automatic, year-round ventilation system that integrates with an existing HVAC system and thermostat to meet ASHRAE 62.2 requirements.

ITEMS INCLUDED IN KIT

• Fresh Air Power Ventilator (FAPV-180AC)
• Fresh Command Multi Family Control (FCMC)
• Mounting Hole Template
• Instruction Manual
• MERV-6 Washable Filter
• Mounting Brackets (2)
• Mounting Packet containing Sheet Metal Screws

REPLACEMENT PARTS

FAPV FEATURES

• Electronic Speed Control with readily accessible Off switch
• Continuous or intermittent Ventilation options
• Passive air flow-operated backdraft damper
• Included MERV6 Washable Air Filter
• Internal Slot for easy slide-in installation of a standard 10”x10”x2” air fi liter
• ETL Listed

FCMC FEATURES

• Complies to ASHRAE 62.2 with built-in
  calculations for easy setup and installation

• Auto-senses 8 key factors at startup to balance temperature and humidity regardless of climate zone

• Built-in temperature and humidity sensors with no additional wiring needed

• Quick-Start Test feature for an immediate test cycle

• Fast Click, lock cover deters tenant or renter interference

• Seeks to ventilate with a heating or cooling call for optimal comfort and efficiency

• One dial to adjust intermittent ventilation• On/off switch with easy access that does not require cover removal

FAPV PRODUCT SPECIFICATIONS

Motorized Impeller Specifications| PSC Motor
Class F Insulated Thermally protected UL, CSA recognized Impeller rated UL 94-5VA flam- mobility Sealed ball bearings
Nominal RPM: 2600
---|---
Power Supply| 115 VAC, 60 Hz
Watts (mx speed)| 85W
Amps (max speed)| 0.90A
Temperature Range| -22 to 140°F Ambient Outdoor Temperature
Control Voltage (optional)| 24 VAC
Air Flow Range| 30 to 220 cfm @ 0.20 Static Pressure
Filtration| MERV 6, Washable, UL-900 rated

FCMC PRODUCT SPECIFICATIONS

Power Requirements (Class 2 Appliance)

Power

Input Voltage| 16-32 VAC
Full Load Power| 1.28W 27.4VAC
Idle Power| 270mW @ 27.4 VAC
Wiring Requirements| 18-22 AWG, 24 VAC (Min)
Operating Temperature Range| 10°F to 160°F
Operating Humidity Range| 5 to 95% RH (non-condensing)
Outputs

Fan Output GF (Maximum Load Current)| 8A inductive @30VAC
Vent (V,V) (Maximum Load Current)| 8A inductive @30VAC, or 30ADC

Field Controls LLC reserves the right to modify a product, without prior notice, whether in design, color or specifications, in order to offer at all times a quality product that is highly competitive. Please consult your national and local building codes to find out whether the installation of electrical products requires the services of a certified technician or electrician. Field Controls is a registered Trademark used under license by Field Controls LLC. All rights reserved.

DIMENSIONAL DATA

INSTALLATION

MECHANICAL CLOSET TYPICAL INSTALLATION

WIRING DIAGRAM OF TYPICAL INSTALLATION

CUSTOMER SUPPORT

Field Controls 2630 Airport Road Kinston, NC 28504
252 522-3031
Fax: 1 800-367-7942
Visit us   at: www.fieldcontrols.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>