QAZQA 94891 Ball 40 Hang Lamp Pendant Light Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA 94891 Ball 40 Hang Lamp Pendant Light
Product Information
- Specifications
- Model: Ball HL 40
- Socket: 1xE27 Max.60W
- Compatible with bulbs: 94891, 91804, 91805, 44480, 98388
- Overall Size: 150CM
- Manufacturer: FittinQ B.V.
- Address: Smaragdweg 52, 5527 LB Hapert, The Netherlands
- Website: www.qazqa.nl.
- Manufacturer: FittinQ LTD
- Address: 55 Baker Street, London, W1U 7EU, United Kingdom
Product Usage Instructions
- Installation
- Ensure the power is switched off before installation.
- Assemble the lamp according to the provided instructions.
- Insert the compatible bulb (1xE27 Max.60W) into the socket.
- Hang or place the lamp in the desired location securely.
- Maintenance
- Regularly clean the lamp with a soft cloth and avoid using harsh chemicals that may damage the surface.
- Safety Precautions
- Avoid exposing the lamp to water or moisture to prevent electric shock.
- Do not exceed the maximum recommended wattage for the bulb socket.
- If the lamp malfunctions, disconnect it from the power source immediately.
- Usage Tips
- Adjust the height of the lamp to achieve the desired lighting effect in your space.
FAQs
- Q: Can I use a bulb with wattage higher than 60W?
- A: No, it is recommended to use bulbs with a maximum wattage of 60W to prevent overheating and damage to the lamp.
- Q: How do I clean the lampshade?
- A: Use a soft cloth slightly dampened with water or a mild cleaning solution to gently wipe the lampshade. Avoid using abrasive materials that may scratch the surface.
Safety Precautions
WIRING DAIGRAM
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Class I: the fitting must be earthed
- Protection Class Il: the fitting is doubled insulated and does not require earthing
- Protection Class Ill: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltages.
- The luminaire can be used in combination with a dimmer
- The luminaire can be dimmed by wall switch
- The reference light angle and light space of the luminaire
This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
- Take note of the symbols when connecting wires:
CONTACT
- FittinQ B.V.
- Smaragdweg 52, 5527 LB Hapert,
- The Netherlands
- www.qazqa.nl.
- FittinQ LTD
- 55 Baker Street,
- London, WIU 7EU
- United Kingdom
- Ball HL 40
- 94891
- 91804
- 91805
- 44480
- 98388
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>