pTron Pulsefit Smartwatch User Manual

pTron Pulsefit Smartwatch

pTron Pulsefit Smartwatch – User Manual

Important: This Smartwatch is Not a Medical Device.

Product Description

1. Bracelet body
2. Long wristbands
3. Short wristbands
4. Display screen
5. Touch keys
6. Charging interface
7. Heart rate sensor

Wearing Method
Best to wear the band in your left hand wrist. Please fit the adjusting holes according to your wrist size, and then do up wristband buckle. The sensor should cling to skin to avoid movement.

Charging the Smartwatch
Please ensure that smartwatch has enough battery at your first time using it. Please charge the watch first if it can not be powered on, and then watch will automatically start.

Charging Method
Unplug the smartwatch dial body from both ends of the strap. Insert the USB plug of the watch correctly into the USB port of the computer or the device adapter (Power input should be 5V).

Power On/Off

1. In shutdown state, please long touch the Multi-function Key (MFK) over 2 seconds to start the device with vibration.
2. Short touch on MFK until you see the function page. Short touch MFK until you get the power off interface. When the power off interface appears touch MFK for 2 seconds to power off the watch.

Smartwatch Operation

1. In power on state, short touch MFK to light up the screen to default page with date and time information.
2. In the default time/date page, short touch the multi-function key to see the different pages. The screen will turn off if no operations in 5 seconds.
3. For checking heart rate/blood pressure, just wake up the screen with 1 touch on MFK, go to the heart rate/blood pressure page, wait for measurement and then the result will be displayed on the screen.

Install the Mobile App on Your Smartphones
Generally, you can download the Android app by search “Lefun health” in the app market or scan the QR code, and the iOS version can also be downloaded by scanning the QR code.

OS Compatibility – Android 5.0 & above | iOS 9.0 & above Bluetooth 4.0 and above support

Configure the Smartwatch with the Mobile App
For the first time using the watch, please connect it to the App to calibrate the time and date, otherwise the pedometer and sleeping monitor will not be accurate. The smartwatch will automatically be synchronized when successfully connected.

1. Open the mobile App and click on the 3 dashes on the left top corner of the App window. Device name/connection status, pTron will shown on the screen just connect it. It will auto sync with your phone.
2. After the watch is configured with the APP successfully, the APP will save the watch info, search and connect the watch automatically if the APP is opened or running in the background.
3. Please ensure the watch has all the required permissions of the system during installation or set the permission in your phone’s system settings, such as running in background and reading contact information

Personal Information
Please set personal information after entering the APP; my data → personal data, you can set the gender – age – height – weight to ensure the accuracy of distance and calorie calculation. You can also set target your daily step counts.

Message Notifications
Incoming call: In the connected state, if the incoming call reminder function is enabled, the watch will vibrate when there is incoming call, and the name or number of the incoming call will be displayed.(Need to set permission for APP to access phone address book)

SMS notification
In the connected state, if the SMS remind function is enabled, the watch will vibrate when there is a SMS.

Other remind
In the connected state, if you turn on this feature, the watch will vibrate when there are WeChat, WhatsApp, QQ, Facebook, Instagram and other notifications on your phone, and the message will be displayed on wristband. (Need to turn on notification in phone system, and set permission of APP to access system notifications).

Note: Social media notification depends on phone’s OS.

Vibrating reminder
The band will vibrate when there is a call, information or other reminder.

Sedentary reminder
Set to enable/disable the sedentary reminder function. You can set the reminder in watch function setting, thus the watch will remind if you sit for a long time over that interval. Management to trusted list and allow all permission to enable full functions.

Smart Alarm Clock: In the connected state, Five alarm clocks can be set and synchronized to the band; Offline alarm is also supported. After successfully synchronized, even if the APP is not connected, the watch will still alarm according to the set time.

Wallpaper Push: In this option, you can set the display pages on your watch. The enabled function pages will be switched one by one with your touch on function key (MFK), and disabled function page will not appear.

Search Device: In connected state, click the “search device” option, the watch will vibrate to get your attention.

Shake to Take Selfie: In the connected state, enter the “shake to take selfie” in APP, shake the watch, and the APP will take photos automatically after 3 seconds countdown. Please allow APP to access the camera and photo album to take and save the selfie.

Watch Display Instructions: Press and hold 2 seconds on each interface of the bracelet to enter/exit the menu.

Clock Interface: After synchronizing with the phone, the bracelet will automatically calibrate the time; Standby Time Setting: Press the touch button for 3 seconds on the clock interface to switch between different interfaces. A total of 3 sets of interfaces

Pedometer: Wear the watch to automatically record your daily activity. You can view the real-time steps today.

Distance Travelled: Based on the number of your daily activity and your personal profile, the distance you traveled will be displayed.

Calories Burnt: Based on your walking distance and your personal profile, the calories burned will be displayed. Heart Rate/Blood Pressure: Switch to the heart rate or blood pressure interface, and the result will be displayed in 40 seconds automatically.

Sleep Mode: The bracelet will automatically monitor your sleeping status in night; it will detect your sleep status with deep sleep / light sleep / awake times, calculate your sleep quality; the result can be checked on APP.

Note: The watch will track sleeping status only when you wear it before sleeping in the night. Place the watch somewhere will not trigger the sleep monitor. Sleeping status from 9:00pm to 9:00am will be recorded. Please synchronize your watch with APP after 9:00am the next day to upload the data before you can check it. Shutdown: Long press 2S pop-up shutdown prompt box, choose whether to shut down.

Important

1. This smartwatch is NOT a Medical Device.
2. Take off your band before having shower or swimming.
3. Please connect the band when synchronizing data.
4. Use the 5V USB charging adapter only.
5. Do not expose the watch in high moisture or extreme high temperatures.
6. When the APP crashes or reboots, please check the phone memory, clear it and try again, or exit the app to reopen it.
7. Strap is not covered in manufacturer warranty.
8. Manufacturer/brand owner reserves the right to modify the content of this user manual without prior notification. Some functions are different in the various software versions, which is normal.

Disclaimer

The colors and specifications shown/mentioned in the user manual may differ from the actual product. The images shown are for representation purposes only. Other product logos and company names mentioned herein may be trademarks or trade names of their respective owners.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>