QAZQA 106544 Triangolo Hanging Lamp Instruction Manual

June 1, 2024
QAZQA

QAZQA 106544 Triangolo Hanging Lamp

Product Information

Specifications:

  • Model: Triangolo HL
  • Input Voltage: 220-240V~
  • Frequency: 50Hz
  • Lamp Holder: E27
  • Max Wattage: 40W
  • IP Rating: IP20
  • Overall Sizes: 16cm x 35cm x 150cm

Product Usage Instructions

  1. Ensure the lamp is disconnected from the power supply before installation.
  2. Identify the suitable location for the lamp and ensure it is securely mounted.
  3. Insert a compatible E27 bulb with a maximum power of 40W into the lamp holder.
  4. Connect the lamp to a power source with an input voltage of 220-240V~ and a frequency of 50Hz.
  5. Switch on the power to illuminate the lamp.
  6. If adjusting the height, ensure the lamp is safely repositioned and secured.

FAQ

  • Q: How do I clean the lamp?
    A: To clean the lamp, first, make sure it is unplugged. Use a soft, dry cloth to gently wipe the surface of the lamp. Avoid using harsh chemicals or abrasive materials that may damage the finish.

  • Q: Can I use a bulb with higher wattage than 40W?
    A: No, it is recommended to use a bulb with a maximum wattage of 40W to prevent overheating and potential damage to the lamp.

  • Q: What should I do if the lamp malfunctions?
    A: If the lamp malfunctions, first try replacing the bulb with a new one to see if that resolves the issue. If the problem persists, contact customer support for further assistance.

Safety Precautions

QAZQA-106544-Triangolo-Hanging-Lamp-FIG-
\(1\)

INSTALLATION

QAZQA-106544-Triangolo-Hanging-Lamp-FIG-
\(2\)

Overall Sizes

QAZQA-106544-Triangolo-Hanging-Lamp-FIG-
\(3\)

SAFETY INSTRUCTION

Please study the instruction manual and the below information carefully before installing or using this product. Please keep this user manual for further reference

  1. The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
  2. Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
  3. The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance, or repair work is undertaken.
  4. Exterior lighting must not be installed during rain.
  5. Take account of the minimal separation distance from other objects and the room required around the fitting.
  6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
  7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
  8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
  9. Take account of all available technical information.
  10. Meaning of symbols:
  11. This icon indicates the level of water-proof and dust-proof
  12. Protection Closs I: the fitting must be earthed
  13. Protection Class II: the fitting is doubled insulated and does not require earthing
  14. Protection Closs Ill: the fitting is low-voltage
  15. Minimum distance from lighted objects (meters)
  16. The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kinds of light sources with different bulb icons
  17. The armature is designed to work only with the indicated voltage. Different items require different working voltages. (6) The luminaire can be used in combination with a dimmer
  18. The luminoire can be dimmed wall switch
  19. The reference light angle and light space of the luminaire
  20. This luminaire cannot be disposed of together with normal domestic waste in a standard rubbish can, but you have to bring it to a staging area for electrical waste
    1. Take note of the symbols when connecting wires:
  21. L Live conductor
  22. Earth conductor
  23. N Neutral conductor

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert, The Netherlands
www.qazqa.nl

FittinQ LTD
55 Baker Street,
London, W1U 7EU
United Kingdom

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals