Odotoino DL-280 Ultrasonic Cleaner User Manual

Odotoino DL-280 Ultrasonic Cleaner

• Kindly read this user manual before using it.
• Kindly keep this manual.

Product Structure

Specifications

APPLICATION

DIRT ELIMINATION PROCESS THROUGH ULTRASONIC TECHNOLOGY

OPERATION INSTRUCTIONS

1. Open the lid, put the items in and fill the stainless steel tank with water. (Do not exceed the maximum water level of the tank/ Running without water will damage the unit).
2. Close the lid, and plug in power.
3. Touch “ON/OFF” button to start cleaning, and the indication light is on. The unit will stop automatically after 5 mins.
4. Standard working time is 5 mins, you will hear the “ZIZ!” voice means the unit is working normally. If you want to stop during cleaning, just touch the “ON/OFF” button again.
5. When cleaning finished, unplug it and open the lid, take out the items. Pour water from stainless steel tank and wipe it up.

CLEANING WAYS

1. GENERAL CLEANING
   • Use only plain water for general cleaning. The water should merge the item but not exceed the ruling mark.
2. ENHANCED CLEANING
   • When the item is smeary or extraordinary dirty, add about 5- 10 ml of detergent into water to enhance the cleaning result.
3. CLEANING BY PARTS
   • For large items, place the items as shown. Open the lid, cleaning by part.

USER MAINTENANCE

• After use ,pour the water and wipe up the tank and its surface.
  • Do not wash the unit with water to avoid electric shock.
• Keep it at a cool and dry place.

WARNING: To reduce the risk of burn or injury to persons

• Keep the unit and the cord away heated surfaces, and place it on the dry and level surface.
• Do not disassemble the unit except for the authorized technician.
• Unplug the unit before filling. Do not exceed the “MAX–” mark.
• Do not touch the socket with wet hand to avoid electric shock.
• Do not use this unit when sleeping or drowsy, and do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. To unplug ,pls grasp the plug only , not pull on cord
• Never operate this unit if cord or plug is damaged. If it is not working properly, damaged or has been dropped into water, return the damaged unit to a service centre for examination and repair.
• The unit should never be left unattended when plugged in.
• Do not fill the tank with abrasives or corrosive chemicals.
• Do not immerse the unit into water to avoid electric shock.
• Use the unit properly as per its instruction manual. Do not use attachments not recommended by the manufacturer.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>