Youetly 100W USB-C Power Adapter User Manual
- June 1, 2024
- Youetly
Table of Contents
100W USB-C Power Adapter
User Manual
V1.0 2023.11
Disclaimers
Thank you for purchasing a Youthly 100W USB-C Power Adapter (hereinafter referred to as the Adapter). Be -fore using the charger, please read this statement carefully. Once using this product t is consdered as recogntionand acceptance of theen Tre content of this statement. Please strictly follow these instructions when using this product and pay attention to precautions. Our company is not responsbe for any drect or ndirect osses or injuries caused by theuser’s improper use of the Adapter. Youetly is a registered trademark of LKI. The product names and brands mentioned in this article are trademarks or regstered trademarks of ther respective companes. This product and manual are copyrighted by LIKI. Without permisson no reproduction or reproduction is allowed in any form. The use of this product and manual wil not be subject to patent liabilty, and the final interpretaton rights of this document and all related documents of this product belong to LIKI. There may be differences in disclaimers for different language versions. The Chinese version shall prevail in China, and the English version shall prevail in other regions.
Matters needing attention
- Before using this product, please carefully read and follow all safety and compliance instructions related to this product. Do not use the charger in direct sunlight, rain, or damp environments.
- The charger should be kept away from hazardous materials such as heat sources, high pressure, water, flammable gases, corrosive agents, etc.
- In case of fire, please use dry powder fire extinguishers correctly to extinguish the fire. Using liquid type fire extinguishers may pose a risk of electric shock.
- It is strictly prohibited to use chargers in lightning and thunderstorm weather.
- Keep the interior of the charger dry and avoid entering liquids such as water and oil. Please pay attention to insulation and fire prevention when using.
- When charging, please stay away from combustible materials and do not place the charger or battery on the carpet for charging.
- Do not touch the metal terminals of the battery interface with your hands or other objects. If there are foreign objects attached to the metal terminals, please wipe them clean with a dry cloth when the power is turned off.
Product Introduction
The Youetly 100W USB-C Power Adapter can be connected to AC power for DJI Mavic 3 Series drones , DJI Mavic 3 Enterprise Series drones, DJI Air 3 drones, DJI Avata drones, and other drones,as we as charging mobedevices with USB-C port.
Using a charger
- Connect the charger to an AC power source (100-240V, 50/60 Hz).
- With the intelligent flight battery turned off, connect the Battery Charging Hub to the charger.
- In the charging state, the intelligent flight battery level indicator light will cycle and indicate the current level.
- When all the battery indicator lights are off, it indicates that the intelligent flight battery is fully charged. Please disconnect the Battery Charging Hub and charger to complete the charging.
Taking DJI Mavic 3 Series 100W
Battery Charging Hub as an example
Charging the remote controller
- Connect the charger to an AC power source (100-240V, 50/60Hz).
- Connect the remote controller interface to the charger output port.
Charging the remote controller and drone
simultaneously
- Connect the charger to an AC power source (100-240V, 50/60 Hz).
- Connect the remote controller interface to the charger output port.
- With the intelligent flight battery turned off, connect the drone to the charger.
Taking
DJI RC Pro remote controller and DJI Mavic 3 Pro drone as an example
Product specification parameters
| Product model: Product name: | Youetly 100W USB-C Power Adapter |
|---|---|
| Product model: | ADT-100FCP |
| Input voltage: | 100-240V AC, 50-60 Hz,2.5A |
| Output power: | Single port output: |
USB-C1: 100W(Max)
USB-C2: 100W(Max)
Dual port output simultaneously:
USB-C1+USB-C2: Intelligent dynamic allocation based on load power, single
port power is max 82W, total power is max 100W
operation temperature:| 5° to 40℃ (41° to 104° F)
Charging time:| DJI Mavic 3 intelligent flight battery : approximately 1 hour
and 10 minutes
DJI RC-N1 remote controller : approximately 2 hours and 40 minutes
DJI RC remote controller : approximately 2 hours
DJI RC Pro remote controller : approximately 2 hours
DJI RC Pro Industry Edition remote controller : approximately 1 hour and 30
minutes
DJI Avata intelligent flight battery : approximately 47 minutes
DJI Goggles 2 battery : approximately 1 hour and 50 minutes
DJI Air 3 intelligent flight battery : approximately 60 minutes
Adapted products:| DJI Mavc 3 Series, DJI Air 3 DJI Avata DJ Gogges 2
Battery
DJI Mavc 3 Series 65W Battery Charging Hub
DJI Mavc 3 Series 100W Battery Charging Hub
DJI Air 3 Battery Charging Hub, Youetly 200W Air 3 Battery Charging
Hub YouetlyMni 4 Pro/Mni 3 Series Tw o WayCharging Hub
Product size:| 73.5 x 70 x 32mm
Product mainframe weight:| 286±5g (excluding cable weight)
When two interfaces are charging at the same time, the charging time may be
slightly extended. Please be patient and wait.
The charging time was measured in the experimental environment (at room
temperature of 25 ℃) and is for reference only.
PS: The weight/dimensions information shown on this page are all measured
by hand, ±5g and 3-5mm errors are considered normal, for reference only.
Compliance Information
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
EU Compliance
SHENZHEN LIKE FLIGHT TECHNOLOGY CO., LTD. hereby declares that this device is
in compliance with Directive 2014/30/EU and 2014/35/EU ****.
© 2023 Youetly All rights reserved.