ROBO-TEK RoboBuddy Phoenix Robot Vacuum Cleaner and Mop Owner’s Manual

ROBO-TEK RoboBuddy Phoenix Robot Vacuum Cleaner and Mop

Specifications

• Product: LDS Robot Vacuums
• Package Contents: Robot vacuum, Sponge, Charge base, Dust water tank 2 in 1, Knife tool, Side brush, HEPA filter, Mopping shelf, Mop cloth, Dust bag

Product Information

The LDS Robot Vacuums is a floor cleaning robot designed to efficiently clean your home. It includes various components such as a dustbin, filter materials, roll brush, side brush, electrode pad, anti-drop sensor, bumper, drive wheel, universal wheel, light effect, and alarm prompt.

Product Composition:
The robot vacuum consists of multiple parts including the charge base, dustbin, adapter, recharge electrode pads, water tank, HEPA filter, mop shelf, mop cloth, sponge, and more.

Product Usage
Note:

• If the carpet in your home has tassels, please roll the edges under the carpet in advance.
• Before cleaning, please put the furniture and sundries such as tables and chairs in order to leave the largest cleaning space.

Robot Operation:
The robot can be controlled via the start/pause button, recharge button, Lidar navigation module, switch on/off button, and various sensors for efficient cleaning.

Parts Maintenance:
Regular maintenance of parts like the dustbin, filter materials, roll brush, side brush, and other components is essential for optimal performance.

Troubleshooting:
If you encounter any common problems with the robot vacuum, refer to the troubleshooting guide in the manual for solutions.

FAQ:

• Q: Can I use the robot vacuum on all types of flooring?
  A: The robot vacuum is suitable for various floor types including hardwood, tile, and carpet. However, ensure the carpet does not have tassels.

• Q: How often should I clean the filters?
  A: It is recommended to clean or replace the filters regularly to maintain the efficiency of the robot vacuum.

Pls read this manual carefully before use it. Please keep it properly.
Thank you for your buy of the floor cleaning robot ! I hope you enjoy it.
Due to the continuous improvement of the product, this product shall prevail in kind, and our company reserves the right to update the product.

Safety norms

Please keep a constant vigilance when using the product. Please read this manual carefully and keep it properly before using the product.

Caution

1. In view of the problems that may occur in the cleaning of the product, the power line and small items on the ground should be eliminated as soon as possible to avoid the obstruction of the product in the cleaning process, and the edge spike of the carpet will be folded under the carpet. And keep drapes, tablecloths, etc. off the ground.
2. If there is a hanging environment such as stairs, please first test the product to see whether it can detect the edge of the hanging area without falling. Protective control should be set on the edge of the hanging area to prevent the product from falling, and ensure that the protective equipment will not cause personal injury such as tripping
3. Please use the product according to the instructions in the manual. Only use the accessories recommended or sold by the manufacturer.
4. Ensure that the power supply voltage meets the voltage marked on the charging socket.
5. Before using the product, ensure that the dust box and filter material are installed in place.
6. If the power cable is damaged, it must be replaced by professionals from the manufacturer, its maintenance department or similar department to avoid danger.
7. Turn off the product switch before cleaning and coning the product.
8. Remove the plug from the power socket before cleaning and maintaining the product.
9. Before discarding the product, please remove the product from the charging socket, turn off the power switch of the product and take out the battery.
10. If you do not use the product for a long time, please power off the product. He could have caused the fire.
11. Before discard the product, remove and discard the battery in accordance with local laws and regulations.
12. Dispose the old battery in accordance with local laws and regulations.
13. The product should not be used by children under 8 years old or people with mental disorders. If you want to use it, please do not let children sit on the product and play with the product as a toy.
14. Only use in indoor home environment, do not use in outdoor, commercial and industrial places
15. Do not use the product in the baby room.
16. Do not Use the damaged power cord or power socket When the product cannot work properly due to drop, damage, use outside the room or water, do not use the product. To avoid injury, the manufacturer, authorized distributor or professionals from similar departments must repair the product
17. Please use the products in accordance with the instructions. The company will not be liable for any loss or injury caused by improper use of the products

Warning

1. Only use the original charging seat specially equipped by the manufacturer. Users are not allowed to replace the battery without permission.If the battery is suspected to be damaged, contact the manufacturer, authorized distributor or a professional from a similar department for replacement.
2. Do not use the product in annular olive with open flame or fragile items. .
3. It is forbidden to use the product in the ring collision of extremely hot < above 40 ℃ or extremely cold < below 0℃
4. Human hair, clothes, fingers and other parts shall not be near the opening and operating parts of the product.
5. Do not use the product on wet or stagnant ground.
6. It is forbidden for the product to absorb any items that may block the product, such as stones and waste paper.
7. Do not absorb any flammable substances, such as gasoline, toner and toner for printers or photocopies
8. Do not use products in clean areas with flammable materials.
9. Do not absorb any burning items, such as cigarettes, matches, ashes and so on
10. Do not place items in the suction hole. Do not use the product when the plug of the suction hole is placed. Clean the dust, cotton wool and hair at the suction port to ensure smooth air circulation at the suction por
11. Use the power cable carefully to avoid damage. Do not use the power cable to drag and pull the product and the charging seat of the product, do not use the power cable as a handle, do not clip the power cable in the door, do not pull the power cable at sharp corners and corners, and do not allow the product to run on the power supply.
12. Do not use a damaged charging seat. If the charging seat is damaged, it should be repaired by the manufacturer or its after-sales department in order to avoid danger. It is forbidden to burn the product even if it has been seriously damaged because the battery may explode.

Discard batteries

• If you want to discard the battery in this machine, please do not throw it away together with the household garbage, but to the nearest waste old battery recycling station or Boring branch or after-sales service center for centralized treatment. The following instructions are not for general users, but for the final battery disposal instructions.
• The chemicals IN the built-in battery of this machine will pollute the environment. Please take out the battery in the body in advance before the waste disposal machine. The battery should be sent to the professional battery recycling point for centralized disposal.
• Be careful! Battery leakage exudates can cause damage to human body. If battery leakage exudates, make sure to keep them away from eyes or skin.
• In case of contact, wash your hands immediately with clean water and wash your eyes. If you still feel uncomfortable, seek medical advice immediately.

Remove the battery

• The following information is applicable only when discarding the robot and is not a routine operation instruction
• Remove the battery only when the battery is completely drained
• Under no circumstances should batteries come into contact with metal objects.
• The steps to remove the battery are described below
• Allow the robot to run completely without touching the charging dock
• Turn off the robot power switch
• Remove the screws from the battery cover
• Remove battery cover E
• Unplug the battery connector and remove the battery.

Product composition/Packaging included

Parts name

Charge base

Product usage

Note

• If the carpet in your home has tassels, please roll the edges under the carpet in advan

• Remove the low sundries on the ground that may affect the normal operation of the host, such as wires, toys, etc

• Before cleaning, please put the furniture and sundries such as tables and chairs in order to leave the largest cleaning space

• If the robot is performing tasks at the entrance of the double staircase, the edge of the step or the entrance of the narrow area in the home, please place a protective fence to ensure its safety and smooth operation

Robot charging

Charging note:

1. The charging base can not be used in direct sunlight and near mirrors. If there are objects with strong reflection, if there are objects with strong reflection, please cover the bottom 15cm high

2. To ensure the normal working time of the host, please fully charge it before use. The charging time is 3-4 hours
   Please make sure robot power switch on before charging.

3. For better cleaning and better return to the charging stand, please do not move the charging base at will.

Wifi connected and Appoperation

Wifi connected

1. Method 1: scan the QR code at the bottom of the machine and operate according to the app reminder

2. Method 2: after long pressing the recharge key for 3S, release it after hearing the prompt voice, open the app and manually select the sweeping robot, Bluetooth +
   Wi Fi £¨Wi Fi and Bluetooth can be operat ed in different allocation network modes.

3. Method 3: long press the recharge key for 5S, release it after hearing the prompt voice, and the machine enters AP allocation network.

App operation
Kindly reminder: This product can use mobile APP remote control, scheduled cleaning, cleaning mode experience, etc. Please experience the product function according to the following instructions or the guidance in the APP interface

Kindly reminder

1. The app requires the mobile phone system version (z) IOS 9.0 and above, Android 4.0 and above, please pay attention to updating the mobile phone system version before using the app.
2. The app may be updated, and the latest app interface shall prevail.

Robot operation

For different cleaning needs, this product has a variety of cleaning methods to choose from. You can start various cleaning methods through the robot or app

start cleaning
Applicable scenario: the most commonly used cleaning method. The host machine cleans the whole house with a b w shape d path according to the actual home environment. Setting method:

1. Turn on the power supply on the side of the machine body, press the key of the main machine, and the main machine will start automatic cleaning
2. In the standby mode, press the robot key, and the robot starts automatic cleaning

pause / wake up 、Shutdown

1. pause / wake up
   When the product is working, press the robot key to pause the host
   After the pause for more than 10 minutes, all the indicator lights on the robot panel are off. If you need to start the work again, please briefly press the key to wake up the host. After the indicator light is on, press the key again to start the host to continue the original work, or directly start the host through app operation

2. Shutdown
   After the robot stops working, turn the power on switch on the side of the host to “o” for shutdown. “-” for startup and “o” for shutdown)
   After cleaning finished, it is recommended not to shut down the robot and keep it in the charging state so as to better for next cleaning

Spare parts maintenance

Dustbin and filter materials

Parts maintenance
Dustta nk and filter materials

Roller brush and side brush Clean roller brush

Roller brush and side brush

Parts maintenance
Electrode pad，anti-drop sensor, bumper Clean electrode pad

Kindly reminder

1. If the product is not used for a long time, please fully charge it before storage, and then turn off the power switch
   And insist on replenishing the battery every 3 months to prevent over discharge of the battery

2. If the battery is over discharged or not used for a long time, the product may not be charged. Please contact our after-sales service department for maintenance. Do not disassemble it by yourself

Robot electrode pad, anti-drop sensor, bumper

Drive wheel and universal wheel

Light effect and alarm reminder
Light effect reminder

alarm reminder

Routine fault inspection

When use robot, happen below situation can see and solve.

Produc t parameter

As to product will continue improve, the data subject to real object, our company reverse the right for product update

The number in this logo indicates that the environmental protection service life of the product under normal use is 10 year

Implementation standard

• GB4706. 1-2005
• GB4343. 1-2018
• GB4706. 7-2014
• GB4343. 1-2012

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>