Beltruci BT354BL LED Shower Mirror User Manual

Beltruci BT354BL LED Shower Mirror

Product Information

Specifications

• Model: BT354BL, BT354W
• Mounting: Wall Bracket
• Adhesion Method: 3M Double Sided Tape
• Compatibility: Various wall surfaces including tiles, glass, metal, acrylic, and some painted walls

FAQ

• Q: Can I use other adhesion methods besides 3M tape?
  • A: While 3M tape is recommended for optimal adhesion, you can explore other mounting options suitable for your wall surface.
• Q: How do I remove the mirror from the bracket?
  • A: Carefully detach the mirror by gently pulling it away from the bracket. Avoid using excessive force to prevent damage.

For your safety and continued enjoyment of this product, always read the instructions carefully before using.

Introduction

A FOG FREE Shower Mirror Based on Science

TO ELIMINATE FOG hold mirror under the warm shower stream for a few seconds to WARM IT UP. Allow the mirror and shower temperature to be the same, providing a FOG FREE solution.
No more temperature difference = no more fog!

Easy to Clean

• To remove hard water spots or water droplet stains, wet the mirror, apply a small drop of toothpaste, wet the mirror again, rub toothpaste around the area of the mirror… then rinse and wipe clean!
• It will look like new after months of use.

Illustration

Safety And Storage Instructions

Safety Instructions

• Close supervision is necessary when shower mirror is used by or near children.
• Do not operate this shower mirror if the shower mirror malfunctions or has been damaged in any manner. No repairs should be attempted by the consumer.
• Use shower mirror only for intended use as described in this user manual.
• Be sure mirror is not in a position where it can reflect sunlight.

Storage Instructions

1. Please turn the lights off before storage.
2. Be sure direct sunlight does not strike mirror when left unattended.
3. Place the mirror in cool and dry area.
4. For safety, please make sure the mirror is out of reach of children.

PRECAUTIONS AND BATTERIES

PRECAUTIONS

1. DO NOT clean any part of the product with benzene, thinner or other solvent chemicals. When necessary, clean it with a soft cloth.
2. NEVER IMMERSE the product in water. This will damage the product.
3. DO NOT expose the product to extreme force, shock, or fluctuations in temperature or humidity.
4. DO NOT tamper with the internal components.

BATTERIES

• USE only NEW Alkaline BATTERIES of the SAME KIND.
• DO NOT use rechargeable batteries with this product.
• DO NOT mix new and old batteries.
• DO NOT mix batteries of different types together.
• DO NOT mix alkaline, standard or rechargeable batteries with this product.
• REMOVE exhausted batteries immediately.
• REMOVE the batteries when not in use.
• DO NOT recharge and do not dispose of batteries in fire as the battery may explode.
• AVOID exposing batteries to extreme temperature or humidity or direct sunlight.
• KEEP BATTERIES OUT OF REACH from children. They are a choking hazard.
• DO NOT dispose of this product as unsorted municipal waste. Collection of such waste separately for special treatment is necessary.

Specifications

• [Product Name] LED Shower Mirror with Razor Hook
• [Main Material] Glass + ABS
• [Color Temperature] 3500K-7000K ÷ 500K
• [Battery Type] 4*AAA New Alkaline Batteries (Not included)
• [Max Power] 6.3W +- 2W
• [Product Size] L 180 H 314 W 82 mm
• [Mirror Size] L 157* H 205 mm
• [Waterproof] IP44
• [Net Weight] 570g
• [Packaged Weight] 760g

Packing List

Installation for Mounting Wall Bracket

Option 1:  3M Double Sided Tape

Important Tips:

• Avoid applying 3M tape on surfaces like stone, textured or porous tiles, and certain plastics, as they may not provide the best adhesion.
• Ensure the wall surface is flat, smooth and not concave and/or convex. 3M tape is compatible with various wall surfaces, including tiles, glass, metal, acrylic, and some painted walls.

Step 1: Preparation

• Clean the wall surface thoroughly and ensure it’s dry.
• Use rubbing alcohol or mild detergent to remove any dirt, grime, or soap residue.

Step 2: Apply the Tape to the Back of the Bracket

• Peel off the front cover of the pre-cut 3M double sided tape.
• Apply 3M tape to the back of the bracket.

Step 3: Mount the Bracket on the Wall

• Carefully position the bracket on the desired spot in the shower.
• Peel off the backing cover of the 3M tape to expose the adhesive.
• Use a level to ensure the bracket is straight if needed.
• Press the bracket firmly against the wall surface to attach it securely.
• Wait for at least 24 hours to allow the 3M tape to create a strong bond with the wall surface, making the bracket less likely to fall or become loose when exposed to moisture and steam in the shower. (It’s important to follow this waiting period to ensure the best results and prevent any potential accidents or damage.)

Step 4: Insert the Mirror

• After the 24-hour waiting period test the adhesion: gently tug on the bracket to test its adhesion. If it feels secure, it is ready to use. If not, press it firmly again and wait a little longer for the tape to bond.
• Gently insert the shower mirror into the mounted bracket.
• Ensure the mirror is securely in place.

Important

• Regularly check the mirror’s adhesion to ensure it remains securely mounted.

1. Adhere 3M tape on the back of bracket.
2. Adhere the bracket on the wall surface.
3. Install 4pcs AAA battery.
4. Insert the mirror into the wall-mounted bracket.
5. Support 30 degree rotation, adjust the angle to use.
6. Turn on lights to use.

Option 2:  Hanging by Nails

1. Drill two holes on the wall, install 2pcs nails provided to the bracket.
2. Install 4pcs AAA battery.
3. Insert the mirror into the wall-mounted bracket.
4. Support 30 degree rotation, adjust the angle to use.
5. Turn on lights to use.

Operations

WARRANTY

Beltruci Products provides a 1-year limited warranty on this product against manufacturing defects in materials and workmanship.
Warranty service can only be performed by our authorized service center.
The original dated bill of sale must be presented upon request as proof of purchase to us, or our authorized service center.

The warranty covers all defects in material and workmanship with the following specified exceptions that are NOT COVERED: (1) damage caused by accident, unreasonable use or neglect (including the lack or reasonable and necessary maintenance); (2) damage occurring during shipment (claims must be presented to the carrier); (3) damage to, or deterioration of any accessory or decorative surface; (4) damage resulting from failure to follow instructions contained in your owner’s manual.

This warranty covers only actual defects within the product itself and does not cover the cost of installation or removal from a fixed installation, normal set-up or adjustments, claims based on misrepresentation by the seller or performance variations resulting from installation-related circumstances. To receive warranty service, the purchaser must contact Beltruci via email for the problem determination and service procedure.

Thank you for choosing a Beltruci Product!

Contact

Beltruci Products Pty Ltd

• MODEL: BT354BL BT354W
• Assembled in China
• www.beltruci.com
• Email: [email protected]

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>