Hebron H6A Portable Folding Pedestal Fan H6 Instruction Manual

Hebron H6A Portable Folding Pedestal Fan H6 Instruction Manual

Hebron

“Take the cosy life with you everywhere”
Elegant design,multi-function,reasonable price.
Simple design concept, strict product quality requirements
Hebron make products for you with excellent user experience.

Thank you for purchasing the wireless folding fan Please read the manual to use the product safely and correctly
The picture on the manual may be different from the real object
To improve performance, content may change without notice.

Component Name

Accessory

Main Functions And Features

1. Enjoy ref reshing anytime and anywhereWireless rechargeable folding portable fan for refreshing everywhere.
2. .0ver 38 hours use without cords Equipped with 10000 mAh lithium battery, the endurance time is up to 20 hours.
3. Desktop fan and base fan are interated Freely adjusted height between 40cm-88cm,used as both desktop fan and pedestal fan
4. .Foldable design for easy storage and carrying Fan can be putted into the storage bag to carryout,saving space,exquisite and ightweight
5. Four speed wind adjustable From soft to strong, there are four wind speeds to meet various cooling needs
6. .Low noise brushless motor The noise generated by BLDC motor is 40 dB lower, like the landing of leaves.
7. .Excellent fan blade designAll blades passes the balance test to obtain higher stability, and less noise.
8. .Automatic rotation about 60 degrees Just press the button, the left and right rotation will start automatically.
9. Upanddown105 degreesfreefolding The up and down angles can be adjusted freely according to the use environment.
10. Wireless remote control The wireless remote control can control the fan from a distance sensitively.
11. Fourth gear timing function You can preset the fan working time from 1 hour to 4 hours
12. .Power bank function The fan can charging your mobile phone, tablet and other electronic products.

Instructions For Use

Basic use

1. Whileitis folded, pull up

2. Open the fan follow the arrow upwards to open the fan direction

« The maximum adjustable
= i height is 88cm;
‘ I 1 = Donot use the telescopic g i lever function with f excessive force.

3. Thefan’s head can be adjusted 105° up and down

4. After using the remote control, please
   put it back to the fixed position
   + Please take out the battery insulation of the remote control before use.

• CR2032 battery s built in the remote control. If it can’t be started, replace the battery.
  + Please pay attention to the battery placement direction.
• Press and hold the remote control’ s power key for 1.5s to start the machine.
• Align the transmitter with the receiver and ensure that there are no obstacles.
• The effective distance of remote control is about 5m.

Hold the fan shell with both hands and rotate it counterclockwise to separate the front net.
Wipe the fan blade with a wet towel. Avoid splashing water on the motor.

Instructions For Use
Function and usage

1. Remote control code matching.
   Turn on the LED light with the fan base button;
   Press and hold the rotary button of the fan base until the power and timing lights flash; Press the power control button of the remote control, fan start and code completion.

2. .Switch on / off and wind speed control
   Press once: turn on the fan
   Press 3 times: third gear wind speed
   Press 5 times: turn off the fan
   Press twice: second gear wind speed
   Press 4 times: fourth gear wind speed

3. Timing adjustment
   Press once: The fan will turns off after one hour
   Press twice: The fan will turns off after two hours
   Press 3 times: The fan will turns off after three hours
   Press 4 times: The fan will turns off after four hours N – N N Power control Transmitter Press 5 times: The timing function will be turned off

4. Rotation controlPress once: start the fan rotating function 5.Remote Press twice: turn off the fan rotation function
   .Charging instructions WT:nst?;ed.Please use the attached charging caple for charging. Rotation Timing.Please use 5V / 2A adapter for charging. control control

5. The charging indicator turns green to indicate that charging is complete. Remark:Please use the standard 5V / 2A adapter for charging or the circuit board may be damaged.

6. .Remaining power display

When the fan is off, long press the power key and observe the base indicator

1. 0ne indicator light is on:remaining 30%power.
2. Two indicator light is on:remaining 60% power. 3Three in

Note

Precautions for use

1. Do not remove the fan without repair personnel.
2. Avoid serious impact and falling from height.
3. When using the telescopic rod, stretch section by section and compress section by section slowly.
4. D0 not manually rotate the fan’s head at a large angle.

Charging precautions

1. Please use 5V / 2A adapter for charging.
2. The fan can charge while working, but it is not recommended to chargeand discharge while the fan is running

Precautions for battery use

1. Do not allow non maintenance personnel to remove the battery.
2. ,Please discard the waste battery at the designated location to avoid environmental pollution.

Product Parameters

For faults caused by manufacturing defects and defects, a one-year free warranty is provided.
Warranty service will not be provided under the following situation:

1. Products beyond the warranty period;
2. Product damage due to improper use;
3. Damage caused by self disassembly and assembly of products;
4. Replacement of consumable parts (battery) is required;
5. ,The charging line is damaged (the charging line is a complimentary item and is not included in the warranty item);
6. Damage caused by product falling and impact;
7. Damage caused by natural disasters (flood, fire, etc.);
8. ,In addition, the product is damaged due to failure to follow the operation instructions.
   In addition, the products have no quality problems and will not be returned or refunded

Quality Assurance

Please read the instructions carefully.Warranty card is required for entrusted repair. Only one warranty card is sold with the product.
Please keep it properly.

Shenzhen Hebron Technology Co., Ltd:
Songtang Road Tangxiayong community Yanluo street Baoan District, Shenzhen City, China

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the fol lowing measures:

• Reorient or relocate the receiving antenna.
•  Increase the separation between the equipment and receiver.
•  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>