QAZQA Tuba HL 7 Black Round Design Hanglamp Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA Tuba HL 7 Black Round Design Hanglamp
Product Specifications
- Input Voltage : 220-240V
- Frequency : 50Hz
- IP Rating : IP20
- Maximum Power : 10W
- Model : Tuba HL 7
Product Usage Instructions
Installation:
- Ensure the power supply matches the input voltage specified (220-240V).
- Place the lamp in the desired location with proper ventilationas per IP rating requirements.
- Connect the lamp to a compatible power source.
Operation:
- Use the provided controls to switch the lamp on/off.
- Adjust the lamp position to achieve the desired lighting effect.
Maintenance:
- Regularly clean the lamp with a soft, dry cloth to prevent dust build-up.
- Check for any loose connections and tighten if necessary.
FAQ
- Q: What should I do if the lamp does not turn on?
- A : Check the power supply, ensure the lamp is properly connected, and try a different power outlet.
- Q: Can I use a higher wattage bulb than the maximum specified?
- A: It is not recommended to exceed the maximum power rating as it may damage the lamp and pose a safety hazard.
Safety Precautions
INSTALLATION INSTRUCTIONS
FittinQ B.V.
- Smaragdweg 52, 5527 LB Hapert,
The Netherlands
FittinQ LTD
55 Baker Street, London, W1U 7EU United Kingdom
SAFETY INSTRUCTION
Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according the valid
- regulations for electrical installation. Maintenance of the luminaires is limited to their surfaces.
- During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain. Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries
- stipulate that lighting may be installed only by registered installers. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components
- Take account of all available technical information.
- Meaning of symbols:
This icon indicates the level of water-proof and dust-proof
Protection Class I: the fitting must be earthed
Protection Class Il : the fitting is doubled insulated and does not
require earthing
Protection Class III : the fitting is low voltage
Minimum distance from lighted objects (meters)
The type of lamp and maximum size and wattage indicated in each lighting unit
must not be exceed; different items require different kind of light sources
with different bulb icons
The armature is designed to work only with the indicated voltage. Different
items require different working voltage.
The luminaire can be used in combination with a dimmer
The luminaire can be dimmed by wall switch
The reference light angle and light space of the luminaire
This luminaire cannot be disposed together with normal domestic waste in standard rubbish can, but you have to bring it to a staging area for electrical waste
11. Take note of the symbols when connecting wires:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>