SCOOTHOP K6 Electric Scooter for Kids Ages 6 Plus User Manual
- June 1, 2024
- SCOOTHOP
Table of Contents
SCOOTHOP K6 Electric Scooter for Kids Ages 6 Plus User Manual
⚠ This is a children’s cycling product. Please do not drive on the public road, do not ride it in wet, slippery or low visibility environments .It needs parental care when riding to avoid accidents.
Be sure to wear helmets and protective gear when riding
Overview
Specification
Throttle Instruction
- When the electric scooter is stationary, Continuously press the accelerator twice to switch gears.
- Continuously press the accelerator 3 times to switch the km/ mile unit. There are 3 speed modes: d1(Max Speed 8mph),d2(Max Speed 10mph),and unlimited speed.
To activate unlimited speed, turn off scooter, hold down throttle and long- press power button for 8 secs. Dashboard displays F2 for success. Repeat steps to switch back to d1/d2 modes.
Ambient Light
- Press and hold the power button for 2 seconds to enter the power-on mode, and the surrounding lights will start
- When the music is playing in Bluetooth mode, the lights will jump along with the rhythm of the music
Pairing your Bluetooth® Device (for Scooter K6)
To pair with a Bluetooth® device Follow these steps:
- Make sure both the Bluetooth® function in your device and the scooter are turned on.(Bluetooth will be turned on automatically after booting)
- On your device, locate the Bluetooth® device list. Select ” K6″ from the list.
Charging port
The charging port is protected by a silicone ring to prevent water and dust
Power button operation:
- When the electric scooter is stationary, Continuously press the accelerator twice to switch gears.
- Continuously press the accelerator 3 times to switch the km/mile unit. There are 3 speed modes: d1(Max Speed 8mph),d2(Max Speed 10mph),and unlimited speed. To activate unlimited speed, turn off scooter, hold down throttle and long press power button for 8 secs. Dashboard displays F2 for success. Repeat steps to switch back to d1/d2 modes.
Front Wheel Assembly
Maintenance
- Battery maintenance: In order to guarantee the battery life, when the battery level is low, please charge the scooter timely (Note: When it is not in use for a long time, it is recommended that charge it once a month), If you want to check or replace the battery, please do it with the assistance of professionals. The most suitable temperature of the battery storage is 15 -25; don’t use and place the scooter when the environmental temperature is higher than 40, in order to avoid the lithium battery’s failure, and even lead to the combustion. Do not place the scooter in the car during the hot seasons, because it may lead to the lithium battery’s failure or even the combustion.
- Tire maintenance: In order to guarantee the tire life, please check the tires of the scooter regularly. Once the wheel is abnormal, please repair or replace timely, so as not to cause unnecessary damage during the riding.
- Appearance maintenance: Swab the scooter body with water or mild detergent, it will make your scooter clean. Please do not clean the scooter with irritating potions or any chemical reagents.
Product Name: Electric kid’s scooter
Manufacturer: Lianzhao Technology (Shenzhen) Co., LTD Address:Room 201, Plant
4, Juyin Technology Industrial Factory, No. 1, Ganli Road, Gankeng Community,
Jihua Street, Longgang District, Shenzhen
EC REP
C&E Connection E-Commerce (DE) GmbH Zum Linnegraben 20, 65933, Frankfurt am
Main,Germany info@ce-connection.de
⚠ BATTERY WARNING
KEEP OUT OF REACH OF CHILDREN Swallowing can lead to chemical burns,
perforation of soft tissue, and death. Severe burns can occur within 2 hours
of ingestion. Seek medical attention immediately.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>