POWERSMART HB2802A 80V 21 Single Stage Cordless Snow Blower User Guide
- June 1, 2024
- POWERSMART
Table of Contents
Quick Set Up Guide
Model : HB2802A
UNPACKING
Unpack the snow thrower and all its parts and compare against the list below.
- Snow thrower
- Discharge chute assembly
- Upper handle
- Middle handle
- (Qty. 4) Knob, T bolt, Washer
- Battery pack & Charger
- Owner’s manual
- Safety key
- Clean out tool
Step 1 – Installing the Upper & Lower Handle
Use the knob assembly (knob, washer, T bolt) to connect the upper handle, middle handle, and lower handle. See figure 1.
Figure 1
Step 2 - Installing the chute assembly
Insert the chute and chute handle to the chute base, fix the chute to the base
with bolts, align the holes, then tighten the nut with a 13mm wrench. See
figure 2.
Note: Do not over-tighten the lock nuts.
Figure 2
Step 3 – Installing Clean Out Tool
Hang the Clean out Tool on the middle tube.
Figure 3
www.PowerSmartUSA.com
Amerisun Inc. Itasca, IL
1-872-314-0005
Email:support@amerisuninc.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>