BOSCH PXY.J Induction Hob Instruction Manual

BOSCH PXY.J Induction Hob

Specifications:

• Product: Induction hob
• Model: PXY…J…

Product Information

The induction hob is designed to provide efficient and safe cooking experiences. It comes with various safety features to prevent accidents and ensure proper usage.

Product Usage Instructions

Safety:

Observe the following safety instructions to prevent accidents:

• Risk of fire: Never leave hot oil or fat unattended on the hob.
• Risk of burns: Exercise caution as the appliance and its parts become hot during use.
• Risk of electric shock: Only allow trained specialists to carry out repairs using genuine spare parts.

Avoiding Material Damage:

Follow these guidelines to avoid material damage while using the induction hob:

• Avoid contact between electrical appliance cables and hot parts of the appliance.
• Keep hotplates and saucepan bases dry to prevent accidents.
• Use heat-resistant cookware to prevent shattering due to overheating.

FAQs

• Q: What should I do if the appliance power cord is damaged?
  • A: If the power cord or the appliance power is damaged, refrain from using the appliance and contact trained specialist staff for repairs using genuine spare parts.
• Q: How should I clean the induction hob?
  • A: Allow the appliance to cool down before cleaning. Use a damp cloth with mild detergent to wipe the surface. Avoid using abrasive cleaners that may damage the hob.

boMsgecywRnthBefeeo-rwhegslcecoidsohbmetmevneeinocree.wecfyiooaotnsnum:dr /

Induction hob

PXY…J…

[en]

Information for Use

enSafety
Further information and explanations are available online:

Safety

Observe the following safety instructions.
1.1General information ¡ Read this instruction manual carefully. ¡ Keep the instructions, the appliance and
the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit.
1.2Intended use Only a licensed professional may connect appliances without plugs. Damage caused by incorrect connection is not covered under the warranty. The appliance can only be used safely if it is correctly installed according to the safety instructions. The installer is responsible for ensuring that the appliance works perfectly at its installation location. Only use this appliance: ¡ To prepare meals and drinks. ¡ Under supervision. Never leave the appli-
ance unattended when cooking for short periods. ¡ in private households and in enclosed spaces in a domestic environment. ¡ up to an altitude of max. 4000 m above sea level. Do not use the appliance: ¡ With an external timer or a separate remote control. This does not apply if operation with appliances included in EN 50615 is switched off. When using the cooking functions, set the hotplate on which you have placed the saucepan with the temperature sensor. If you wear an active implantable medical device (e.g. a pacemaker or defibrillator), check with your doctor that it complies with Council Directive 90/385/EEC of 20th June 1990, EN 45502-2-1 and EN 45502-2-2, and that it has been chosen, implanted and programmed in accordance with VDE-AR-E

2750-10. If these conditions are satisfied, and if, in addition, non-metal cooking utensils and cookware with non-metal handles are used, it is safe to use this induction hob as intended. 1.3Restriction on user group This appliance may be used by children aged 8 or over and by people who have reduced physical, sensory or mental abilities or inadequate experience and/or knowledge, provided that they are supervised or have been instructed on how to use the appliance safely and have understood the resulting dangers. Do not let children play with the appliance. Children must not perform cleaning or user maintenance unless they are at least 15 years old and are being supervised. Keep children under the age of 8 years away from the appliance and power cable. 1.4Safe use
WARNING Risk of fire! Leaving fat or oil cooking on an unattended hob can be dangerous and may lead to fires. Never leave hot oil or fat unattended. Never attempt to extinguish a fire using wa-
ter; instead, switch off the appliance and then cover with a lid or a fire blanket. The cooking surface becomes very hot. Never place flammable objects on the cooking surface or in its immediate vicinity. Never place objects on the cooking surface. The appliance will become hot. Do not keep combustible objects or aerosol cans in drawers directly underneath the hob. Hob covers can cause accidents, for example due to overheating, catching fire or materials shattering. Do not use hob covers. After every use, switch off the hob using the main switch. Do not wait until the hob turns off automatically as there are no longer any pots and pans on it. Food may catch fire. The cooking process must be monitored. A short process must be monitored continuously.

Safetyen
WARNING Risk of burns! The appliance and its parts that can be touched become hot during use, particularly the hob surround, if fitted. Caution should be exercised here in order
to avoid touching heating elements. Young children under 8 years of age must
be kept away from the appliance. Hob protective grilles may cause accidents. Never use hob protective grilles. The appliance becomes hot during operation. Allow the appliance to cool down before
cleaning. Metal objects on the hob quickly become very hot. Never place metal objects (such as knives,
forks, spoons and lids) on the hob. WARNING Risk of electric shock!
Incorrect repairs are dangerous. Repairs to the appliance should only be
carried out by trained specialist staff. Only use genuine spare parts when repair-
ing the appliance. If the power cord or the appliance power
cable of this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service. If the appliance or the power cord is damaged, this is dangerous. Never operate a damaged appliance. If the surface is cracked, you must switch off the appliance in order to prevent a possible electrical shock. To do this, switch off the appliance via the fuse in the fuse box rather than at the main switch. Never pull on the power cord to unplug the appliance. Always unplug the appliance at the mains. If the appliance or the power cable is damaged, immediately switch off the fuse in the fuse box. Call customer services. Page 28 An ingress of moisture can cause an electric shock. Do not use steam- or high-pressure cleaners to clean the appliance.

3

Avoiding material damage

The insulation on cables of electrical appliances may melt if it touches hot parts of the appliance. Never bring electrical appliance cables into
contact with hot parts of the appliance. If metallic objects come into contact with the fan that is located on the underside of the hob, this may cause an electric shock. Do not store long, pointed metallic objects
in the drawers below the hob. WARNING Risk of injury!
Saucepans may suddenly jump due to liquid between the saucepan base and the hotplate. Always keep hotplates and saucepan
bases dry. Never use icy-cold cookware that has been
in the freezer. The wireless temperature sensor is equipped with a battery, which may become damaged if it is exposed to high temperatures. Remove the sensor from the cookware and
store it away from any heat sources. The temperature sensor may be very hot when removing it from the saucepan. Wear oven gloves or use a tea towel to re-
move it.

When cooking in a bain marie, the hob and cooking container could shatter due to overheating. The cooking container in the bain marie
must not directly touch the bottom of the water-filled pot. Only use heat- resistant cookware. An appliance with a cracked or broken surface can cause cuts. Do not use the appliance if it has a cracked or broken surface.
WARNING Danger: Magnetism! The wireless temperature sensor is magnetic and can damage electronic implants, e.g. heart pacemakers or insulin pumps. Persons with electronic implants must
stand at least 10 cm away from the magnetic control element. Never put the control element in your pockets.
WARNING Risk of suffocation! Children may put packaging material over their heads or wrap themselves up in it and suffocate. Keep packaging material away from chil-
dren. Do not let children play with packaging ma-
terial. Children may breathe in or swallow small parts, causing them to suffocate. Keep small parts away from children. Do not let children play with small parts.

2 Avoiding material damage Avoidingmaterialdamage

This is where you can find the most common causes of damage and tips on how to avoid them.

Damage Stains Stains, blisters
Stains, blisters or fractures in the glass
Stains, discolouration

Cause Unsupervised cooking process. Spilled food, especially food with a high sugar content. Defective cookware, cookware with melted enamel or cookware with copper or aluminium base. Unsuitable cleaning methods.

Blisters or fractures in Knocks or falling cookware, cooking ac-

the glass

cessories or other hard or pointed objects.

Scratches, discolour- Rough cookware bases or moving the cook-

ation

ware on the hob.

Scratches

Salt, sugar or sand.

Measure Monitor the cooking process. Remove immediately with a glass scraper.
Use suitable cookware that is in a good condition.
Only use cleaning agents that are suitable for glass ceramic, and only clean the hob when it is cold. When cooking, do not hit the glass or let objects fall onto the hob. Check the cookware. Lift the cookware when moving it. Do not use the hob as a work surface or storage space.

4

Environmental protection and saving energyen

Damage

Cause

Damage to the appli- Cooking with frozen cookware. ance

Damage to the cook- Cooking without contents. ware or the appliance

Glass damage

Melted material on the hot cooking zone or hot pot lid on the glass.

Overheating

Hot cookware on the control panel or on the frame.

Measure Never use frozen cookware.
Never place or heat empty cookware on a hot cooking zone. Do not place greaseproof paper or aluminium foil nor plastic containers or pot lids on the hob. Never place hot cookware on these areas.

ATTENTION! A fan is located on the underside of this hob. If a drawer is located on the underside of the hob,
do not store any small or pointed objects, paper or tea towels in it. These objects may be sucked in and damage the fan or impair the cooling. There must be a clearance of at least 2 cm between the contents of the drawer and the fan entry point.

Environmental protection and saving energy

3.1Disposing of packaging
The packaging materials are environmentally compatible and can be recycled. Sort the individual components by type and dispose
of them separately.
3.2Saving energy
If you follow these instructions, your appliance will use less energy. Select the cooking zone to match the size of your pan. Centre the cookware on the hob. Use cookware whose base diameter is the same diameter as the hotplate. Tip: Cookware manufacturers often give the upper diameter of the saucepan. It is often larger than the base diameter. ¡ Unsuitable cookware or incompletely covered cook-
ing zones consume a lot of energy. Cover saucepans with suitable lids. ¡ Cooking without a lid consumes considerably more
energy.

Lift lids as infrequently as possible. ¡ When you lift the lid, a lot of energy escapes.
Use a glass lid. ¡ You can see into the pan through a glass lid
without having to lift it. Use pots and pans with flat bases. ¡ Uneven bases increase energy consumption.
Use cookware that is suitable for the quantity of food. ¡ Large items of cookware containing little food need
more energy to heat up. Cook with only a little water. ¡ The more water that is contained in the cookware,
the more energy is required to heat it up. Turn down to a lower power level early on. ¡ If you use an ongoing power level that is too high,
you will waste energy. Product Information according (EU) 66/2014 can be found on the attached appliance pass and online on the product page for your appliance.

Suitable cookware

Cookware that is suitable for induction cooking must have a ferromagnetic base, i.e. it must be attracted by a magnet. The base must also match the size of the cooking zone. If cookware is not detected on a cooking zone, place this on the cooking zone with the next smallest diameter.

4.1Size and characteristics of the cookware
To be able correctly detect the cookware, you must take the size and the material of the cookware into consideration. All cookware bases must be perfectly flat and smooth. Use Cookware test to check whether the cookware is suitable. Refer to “Cookware test”, Page 22 for more details.

5

enSuitable cookware

Cookware Recommended cookware Suitable
Not suitable

Materials Stainless steel cookware in a sandwich design that distributes the heat well. Ferromagnetic cookware made of enamelled steel, cast iron or special induction cookware made of stainless steel. The base is not fully ferromagnetic.
Cookware bases that contain aluminium.
Cookware made from normal thin steel, glass, clay, copper or aluminium.

Properties This cookware distributes the heat evenly, heats up quickly, and ensures that it can be detected easily. This cookware distributes the heat evenly, heats up quickly, and ensures that it can be detected.
If the ferromagnetic area is smaller than the base of the cookware, only the area that is ferromagnetic heats up. As a result, the heat is not distributed evenly. These cookware bases reduce the ferromagnetic area, which means that less power is emitted to the cookware. This cookware may not be sufficiently detected or may not be detected at all, and therefore does not heat sufficiently.

Notes ¡ Do not use adapter plates between the hob and the
cookware. ¡ Do not heat up empty cookware and do not use
cookware with a thin base, as this may become very hot.

6

Familiarising yourself with your appliance

5 Familiarising yourself with your appliance Familiarisingyourselfwithyourappliance
5.1Control panel
Individual details, such as colour and shape, may differ from the figure.

Notes ¡ Always keep the control panel clean and dry. ¡ Do not place any cookware near the displays or but-
tons. The electronics may overheat.
Touch buttons When you switch on the hob, the symbols for the controls available at this time light up.

Button Function Main switch Wipe protection Childproof lock Basic settings Info menu Count-up timer Timer FlexInduction
0….Boost Settings area ¡ Switch-off timer ¡ 1….9 power levels ¡ Keep-warm function ¡ PowerBoost ¡ PanBoost Cooking modes menu ¡ Power levels ¡ MoveMode ¡ PerfectFry Sensor ¡ PerfectCook Sensor ¡ Meal assistant

Buttons in connection with Home Connect As soon as the connection to Home Connect has been established, the following buttons are available:

Button

Function Connectivity Hob-based hood control

Button

Function Ventilation control sensor Hood lighting

5.2Touch display
You can use the touch display to operate the appliance simply and intuitively.
Main screen The main view displays an overview of the hob’s cooking zones. Cooking modes, power levels and time-setting options are shown on the displays for the active cooking zones.

7

enFamiliarising yourself with your appliance
Settings range You can use this function to set the power level, the cooking time programming and the various cooking modes for the selected cooking zone.

Displaying the status bar 1. Touch the top of the screen and swipe your finger
up and down.

Status bar The information displayed varies depending on the settings made: Timer, kitchen clock

a The status bar is displayed. 2. Drag the status bar upwards to hide it. Note: In some cases, the status bar automatically disappears after a few seconds.
Info menu You can call up information about the appliance and the current functions.
Opening the info menu 1. Touch . 2. Touch the symbol for the function you require and
hold it for a few seconds. a On the display, an info window appears that de-
scribes the current function. 3. To return to the main view, touch .

Cooking modes menu The hob has a number of different cooking modes.

To access it, touch

in the settings area for the selected cooking zone.

Symbol

Cooking mode Power levels MoveMode
PerfectFry Sensor PerfectCook Sensor
Meal assistant

Function Selecting the power level for the cooking zone. Setting the power level via the position of the cookware in the cooking zone. Fry at the right temperature. The wireless cooking sensor automatically detects the temperature as cooking progresses. Available after connection to the wireless cooking sensor. Frying and cooking with preselected settings for particular dishes.

8

Before using for the first timeen

5.3Distribution of the cooking zones
The specified power has been measured with the standard pots, which are described in IEC/EN 60335-2-6. The power may vary depending on the size of the cookware or cookware material.

A

A

Area

Highest power level Power level 9 PowerBoost Power level 9 PowerBoost

2200 W 3700 W 3300 W 3700 W

Area

Highest power level Power level 9 PowerBoost Power level 9 PowerBoost

2600 W 3700 W 3300 W 3700 W

5.4Cooking zone

Before you start cooking, check whether the size of the cookware fits the cooking zone that you want to use for cooking:

Area
/

Cooking zone type Single-circuit cooking zone Flex Zone “FlexInduction”, Page 11 Extended FlexZone “Extended FlexInduction”, Page 12

5.5Residual heat indicator
When the cooking zones are switched off, the zone indicators light up red whilst the cooking zones are still hot. Do not touch the cooking zone if the cooking zone indicator is lit red.

Before using for the first time

Observe the following recommendations.
6.1Initial start-up
When you switch on the appliance for the first time, the standard language setting appears on the display as a first step to configure the hob. You can change these settings at any time in the basic settings. Page 21

6.2Setting Home Connect
To start the connection settings, select the Home Connect setting in the basic settings and follow the instructions in the section entitled “Home Connect “, Page 22.
6.3Cooking with induction
In comparison to conventional hobs, induction technology brings with it a series of changes and has a number of benefits such as time savings when cooking and frying, energy savings as well as greater ease of cleaning and care. It also offers improved heat control as the heat is generated directly in the cookware.

Basic operation

7.1Switching the hob on
Touch . A signal tone sounds and the touch display lights up.
a The hob is ready to use.
ReStart If you switch the appliance on within 10 minutes of
switching it off, the hob operates with the settings that were previously set. You can activate this function in the basic settings. Page 21

7.2Switching the hob off
Touch until the displays go out. a All cooking zones are switched off. Note: If all of the cooking zones are switched off for longer than 30 seconds, the hob is automatically switched off.
7.3Setting the power level in the cooking zones
The cooking zone has 17 power levels, which are displayed from to with intermediate values. Select the best power level for the food and the planned cooking process.
9

enBasic operation
1. Touch the required cooking zone. a The settings area for the cooking zone that you
have selected appears on the display panel. 2. Swipe your finger over the settings area and touch
the power level that you require. a The power level has been set. 3. To return to the main screen, touch the cooking
zone display. Note: If no cookware is placed on the cooking zone or the pot is not suitable, the selected power level flashes. After a certain period of time, the cooking zone switches itself off.

Changing the power level and switching off the cooking zone 1. Select the cooking zone. 2. Select the required power level or set it to 0 in the
settings area. a The cooking zone’s power level changes or the
cooking zone switches itself off and the residual heat indicator appears.
Quick selection Use your finger to swipe right over the cooking zone
to set the power level to 9.0. Use your finger to swipe left over the cooking zone to set the power level to 0.0. You can activate this function in the basic settings. Page 21

7.4Cooking tips

¡ When heating up puree, cream soups or thick sauces, stir occasionally.
¡ To preheat, set the power level 8-9. ¡ When cooking with the lid on, reduce the power
level as soon as you see steam escaping. The cooking result is not affected by the steam escaping. ¡ After cooking, place a lid on the cookware until you serve the dish. ¡ To cook with the pressure cooker, observe the manufacturer’s instructions. ¡ Do not cook food for too long, otherwise nutrients will be lost. The kitchen timer enables you to set the optimal cooking time. ¡ Ensure that the oil does not smoke. ¡ To brown the food, fry it in small portions, one after the other. ¡ Some items of cookware may reach high temperatures while the food is cooking. You should therefore use oven gloves. ¡ You can find recommendations for energy-efficient cooking under “Saving energy”, Page 5

Cooking recommendations

The table shows which power level ( ) is suitable for

which food. The cooking time (

) may vary de-

pending on the type, weight, thickness and quality of

the food.

Melting Chocolate coating Butter, honey, gelatine Heating and keeping warm Stew, e.g. lentil stew Milk1 Boiled sausages1 Defrosting and heating Spinach, frozen Goulash, frozen Poaching, simmering 1 Without lid

1 – 1.5 –

1 – 2

–

1.5 – 2 –

1.5 – 2.5 –

3 – 4

–

3 – 4 3 – 4

15 – 25 35 – 55

10

Potato dumplings 1 Fish 1 White sauces, e.g. Béchamel sauce Whisked sauces, e.g. Béarnaise sauce, Hollandaise sauce Boiling, steaming, braising Rice, with double the volume of water Rice pudding Unpeeledboiled pots Boiled potatoes Pasta 1 Stew

4.5 – 5.5 4 – 5 1 – 2
3 – 4
2.5 – 3.5
2 – 3 4.5 – 5.5 4.5 – 5.5 6 – 7 3.5 – 4.5

Soups Vegetables Vegetables, frozen Stew in a pressure cooker Stewing Rolled roasting joint Pot roast Goulash Braising/frying with a small amount of fat 1 Escalope, plain or breaded Escalope, frozen Chops, plain or breaded Steak (3 cm thick) Poultry breast (2 cm thick) Poultry breast, frozen Rissoles (3 cm thick) Hamburgers (2 cm thick) Fish and fish fillet, plain 1 Without lid

3.5 – 4.5 2.5 – 3.5 3.5 – 4.5 4.5 – 5.5
4 – 5 4 – 5 3 – 4
6 – 7 6 – 7 6 – 7 7 – 8 5 – 6 5 – 6 4.5 – 5.5 6 – 7 5 – 6

20 – 30 10 – 15 3 – 6
8 – 12
15 – 30
30 – 40 25 – 35 15 – 30 6 – 10 120 180 15 – 60 10 – 20 7 – 20 –
50 – 65 60 – 100 50 – 60
6 – 10 6 – 12 8 – 12 8 – 12 10 – 20 10 – 30 20 – 30 10 – 20 8 – 20

FlexInductionen

Fish and fish fillet, breaded

6 – 7

Fish, breaded and frozen, e.g. 6 – 7 fish fingers

Prawns and scampi

7 – 8

Sautéing fresh vegetables and 7 – 8 mushrooms

Stir-fry, vegetables, meat cut in 7 – 8 strips Asian-style

Frozen dishes, e.g. stir-fries

6 – 7

Pancakes, cooked one after the 6.5 – 7.5 other

Omelette (cooked one after the 3.5 – 4.5 other)

1 Without lid

8 – 20 8 – 15
4 – 10 10 – 20
15 – 20
6 – 10 –
3 – 10

FlexInduction

The FlexZone allows you to position cookware of any shape or size any way you like. It consists of four inductors that work independently of each other. If the FlexZone is in use, only the area that is covered by the cookware is activated.
8.1Positioning the cookware
The flexible cooking zone can be configured in two ways, depending on which cookware is used. In order to guarantee good thermal detection and heat distribution, we recommend positioning the cookware in the centre, as shown in the figures. As a connected cooking zone Recommended for cooking with just one item of cookware. ¡ Position the cookware depending on the size:

Fried eggs Deep-frying, 150­200 g per portion in 1­2 l oil, deep-fat fried in portions1 Frozen products, e.g. chips, chicken nuggets Croquettes, frozen Meat, e.g. chicken portions Fish, breaded or battered Vegetables, mushrooms, breaded, beer-battered or tempura Small baked items, e.g. doughnuts, battered fruit 1 Without lid

5 – 6
8 – 9 7 – 8 6 – 7 6 – 7 6 – 7
4 – 5

3 – 6
–
–

As two separate cooking zones Recommended for cooking with two items of cookware. You can use the front and rear zone independently of one another, and set a separate power level for each zone.

Caution Do not place cookware in the middle between the right and left zones. The cooking zones are not activated correctly and you do not achieve a good cooking result.

¡ Recommended oblong cookware :

8.2FlexInduction connect
By default, the FlexZone is configured as two separate cooking zones. Switch on the following function to connect the cooking zones: 1. Set the cookware down on the cooking zone. 2. Touch . a lights up. The FlexZone is connected.
11

enExtended FlexInduction
Notes ¡ You can change the default setting for the FlexZone.
You can find out how to do this in the “Basic settings” section. Page 21 ¡ If you move or lift the cookware from an active connected cooking zone, an automatic search starts. Each item of cookware that is found within the cooking zone during this search is heated at the previously selected power level.

Extended FlexInduction

With the extended FlexZone, you can cook with larger cookware or position long cookware sideways on. The extension always switches on in conjunction with one of the two FlexZones. You cannot switch the extension on separately.
9.1Position the cookware according to weight and size
Position the cookware in the middle over the rear part of the flexible cooking zone and its extension. Depending on the size of the cookware and the covered cooking surface, you can switch on the flexible cooking zone as two separate cooking zones or as one connected cooking zone:

8.3FlexInduction disconnecting
Touch . a The cooking zones are separate and work inde-
pendently of each other.
9.2Activating Extended FlexInduction
1. Place the cookware on the cooking zone in such a way that it is also on the extended FlexZone.
2. Select the cooking zone and the power level. The area of the extended FlexZone is shown on the display.
a The function is switched on. Note: If the extended FlexZone is not shown on the display, lift the pan and place it on the cooking zone.
9.3Deactivating Extended FlexInduction
Select the cooking zone and set it to to 0. a The function is switched off.

Move Mode

You can use this function to change the power level for an item of cookware by simply moving it within the FlexZone. For this, the zone is divided into three areas with different power levels.
10.1Positioning and moving the cookware
Only use one item of cookware. The cooking area depends on the cookware used, as well as its size and positioning. Each cooking area has a preset power level: ¡ Front section = power level 9.0 ¡ Middle section = power level 5.0 ¡ Rear section = power level .

You can change the standard setting for the default power levels. You can find out how to do this in the “Basic settings” section Page 21.

12

10.2Activating MoveMode

Requirement: Only place one item of cookware on a FlexZone.

1. Select one of the two cooking zones in the

FlexZone.

2. Touch

.

3. Select

a lights up.

Time-setting options

Your hob has various functions for setting the cooking time: ¡ Switch-off timer ¡ Timer ¡ Count-up timer
11.1Switch-off timer
You can use this function to programme a cooking time for one or more cooking zones. The cooking zone is automatically switched off once the time that is set has elapsed. Switching on Switch-off timer 1. Select the cooking zone and the power level. 2. Touch in the settings area. 3. Set the cooking time in the settings area. 4. Touch to confirm. a The cooking time begins to elapse. a Once the cooking time has elapsed, the cooking
zone is switched off and a signal sounds. Notes ¡ If a cooking time has been programmed in a cook-
ing zone in which the PerfectFry Sensor is activated, the programmed cooking time will start to count down as soon as the selected temperature level has been reached. ¡ When you set a cooking time for a cooking zone in which the PerfectCook Sensor is activated, the cooking time will not start counting down until the selected temperature level has been reached. Changing or switching off Switch-off timer 1. Select the cooking zone and touch . 2. Change the cooking time in the programming area or touch to delete the time. 3. Touch to confirm the selected setting. 4. Touch and then to return to the main view.
12 PowerBoost PowerBoost
This function allows large volumes of water to be heated up even more quickly than with power setting 9.

Time-setting optionsen

a The function is switched on. Note: You can change the power levels of the zones during cooking.

10.3Deactivating MoveMode

1. Select a cooking zone.

2. Touch

and switch to a different cooking mode.

a The function is switched off.

11.2Timer
You can use this function to switch on a timer. This function operates independently of the cooking zones and other settings. It does not automatically switch off the cooking zones.
Switching on Timer 1. Touch . 2. Select the required time in the programming area. 3. Touch to confirm the setting. a The time starts to elapse. a A signal tone sounds once the time has elapsed. 4. Touch . a The displays go out and the signal tone stops.
Changing or switching off the Timer 1. Touch . 2. Change the time in the programming area or touch
to delete the time. 3. Touch to confirm the selected setting. 4. To return to the main view, touch .
11.3Count-up timer
The stopwatch function displays the time that has elapsed since activation.
Switching on Count-up timer Touch . a The time starts to elapse.
Switching off Count-up timer 1. Touch . 2. Touch . The time display is set to 00 m 00 s.
To switch the time display on again, touch . 3. To return to the main view, touch .

13

enPanBoost This function is available for all cooking zones, provided the other cooking zone in the same group is not in use.

12.1Switching on PowerBoost

1. Select the cooking zone.

2. Select and hold

in the settings area until

and light up.

13 PanBoost PanBoost
You can use this function to heat up pans more quickly than with power level 9. This function is available for all cooking zones, provided the other cooking zone in the same group is not in use.

13.1Recommended applications
¡ Do not place a lid on the pan. ¡ Never leave pans unattended when they are heating
up. ¡ Only use cold pans.
14 Keep-warm function Keep-warmfunction
You can use this function to melt chocolate or butter, and to keep meals warm.
14.1Switching on Keep-warm function
1. Select the cooking zone. 2. Touch in the settings area.
lights up. a The function is switched on.
15 Transfer settings Transfersettings
You can use this function to transfer the power level, set cooking time and selected cooking function from one cooking zone to another.
14

3. Without lifting your finger off, touch the symbol. 4. Lift your finger. a The function is switched on. Note: You can also switch on this function when cooking with a connected FlexZone.
12.2Switching off PowerBoost
1. Select the cooking zone. 2. Set a different power level in the settings area. a The function is switched off. Note: In certain circumstances, the function is automatically switched off to protect the electronic components inside the PCB.

¡ Use pans with a completely flat base. Do not use pans with a thin base.

13.2Switching on PanBoost

1. Select the cooking zone.

2. Select and hold

in the settings area until

and light up.

3. Without lifting your finger off, touch the symbol.

4. Lift your finger.

a The function is switched on.

Note: You can also switch on this function when cooking with a connected FlexZone.

13.3Switching off PanBoost
1. Select the cooking zone. 2. Set a different power level in the settings area. a The function is switched off. Note: To avoid high temperatures, this function automatically switches itself off after 30 seconds.

14.2Switching off Keep-warm function
1. Select the cooking zone. 2. Set to 0.
The cooking zone and switch off. a The function is switched off.

15.1Transfer settings
Requirement: Move the cookware to a cooking zone which is not switched on, which you have not yet preset and on which no other cookware has been previously placed.

1. Move the cookware.

Assisten 2. Confirm the settings. a The settings are transferred to the new cooking
zone.

The cookware is detected. After a few seconds, the option to confirm the default settings for the new cooking zone appears on the display.

Assist

The cooking assistant is guaranteed to make cooking simple and it promises outstanding cooking results. If you have selected the required temperature, the sensors continuously measure the temperature of the cookware and keep it constant during the cooking process. Advantages ¡ Once the selected temperature is reached, it auto-
matically keeps it constant, saving energy. ¡ The oil will not overheat and the food will not boil
over.

16.1PerfectFry Sensor

Suitable for cooking or reducing sauces, pancakes or

frying eggs with butter, for frying vegetables or steaks

up to the required level of boiling, and for keeping the

temperature under control.

This function is available on all cooking zones marked

with this symbol

.

Temperature levels Temperature levels for preparing meals.

Level Temper- Functions ature

Cookware

1

120 ºC Boiling and reducing

sauces, fry veget-

ables

2

140 ºC Searing in olive oil or

butter

3

160 ºC Frying fish and

coarse foods

4

180 ºC Deep-fat frying

breaded, frozen and

grilled food

5

215 ºC High-temperature grill

and griddle plate

Recommended cookware Special cookware has been developed for this function, which delivers the best results.

Cookware Frying pan, 15 cm diameter

Recommended cooking zone Single cooking zone

Cookware
Frying pan, 19 cm diameter Frying pan, 21 cm diameter Frying pan, 28 cm diameter Teppanyaki Grill

Recommended cooking zone Single cooking zone
Single cooking zone
Extended FlexZone
Flex Zone Flex Zone

The recommended cookware is available from customer service, specialist retailers or our online shop www.bosch-home.com. Note: You can also use other cookware. Depending on the composition of the cookware, the achieved temperature may differ from the selected temperature level.

Switching on the PerfectFry Sensor

1. Place empty cookware on the cooking zone.

2. Select a cooking zone.

3. Touch

and select

PerfectFry Sensor.

4. Select the required temperature level and touch

to return to the main screen.

a The function is switched on. The temperature level

and

light up.

a The temperature display lights up increasingly red

until the required temperature level has been

reached. A signal then sounds.

5. Add the frying fat and then the food to the frying pan.

Switching off PerfectFry Sensor 1. Select the cooking zone. 2. Set to 0. a The function is switched off. 3. To exit the PerfectFry Sensor function, touch
and select a different cooking mode.

Recommendations for cooking with PerfectFry Sensor

The following table shows the ideal temperature levels

for a selection of dishes. The temperature and the

cooking time

depend on the amount, condition

and quality of the food.

¡

Frying pan

¡ Teppanyaki

15

enAssist

¡ Griddle plate

Cookware

Meat

Escalope

4 6-10

Escalope, breaded

4 6-10

Fillet

4 6-10

Chops

3 10-15

Cordon bleu, Wiener Schnitzel

4 10-15

Steak, rare, 3 cm thick

5 6-8

Steak, medium, 3 cm thick

5 8-12

Steak, well-done, 3 cm thick

4 8-12

T-bone steak, rare, 4.5 cm thick

5 10-15

T-bone steak, medium, 4.5 cm thick

5 20-30

Poultry breast, 2 cm thick

3 10-20

Bacon

2 5-8

Minced meat

4 6-10

Hamburgers, 1.5 cm thick

3 6-15

Meatballs, 2 cm thick

3 10-20

Sausages

3 8-20

Chorizo, fresh sausages

3 10-20

Skewers, kebabs

3 10-20

Gyros

4 7-12

Fish and seafood

Fish fillet

4 10-20

Fish fillet, breaded

4 10-20

Fish, fried, whole

3 10-20

Sardines

4 6-12

Scampi, prawns

4 4-8

Squid, cuttlefish

4 6-12

Egg dishes

Fried eggs in butter

2 2-6

Fried eggs

4 2-6

Scrambled eggs

2 4-9

Omelette

2 3-6

French toast

3 4-8

Crêpes, blinis, pancakes, tacos

5 1-3

Vegetables

Roast potatoes

5 6-12

Chips

4 15-25

Potato pancakes

5 2-4

Onions, roasted garlic

2 2-10

Onion rings

3 5-10

Courgettes, aubergines, peppers

2 4-12

Green asparagus

3 4-15

Mushrooms

4 10-15

Vegetables, braised in oil

1 10-20

Vegetables in tempura batter

4 5-10

16

Cookware

Frozen products

Chicken nuggets

4 10-15

Fish fingers

4 8-12

Chips

5 4-8

Stir-fries

3 6-10

Spring rolls

4 10-30

Pastries, croquettes

5 3-8

Sauces

Tomato sauce

1 25-35

Béchamel sauce

1 10-20

Cheese sauce

1 10-20

Sweet sauces

1 15-25

Sauces, reduced

1 25-35

Other

Fried cheese

3 7-10

Croutons

3 6-10

Toasted bread

4 4-8

Dried ready meals

1 5-10

Almonds, walnuts, pine nuts, roasted

4 3-15

Popcorn

5 3-4

16.2PerfectCook Sensor

You can use this function to heat up, cook or boil foods, cook with the pressure cooker or fry in a pot with a lot of oil at a controlled temperature. In order to use these functions, you need the wireless cooking sensor for wireless cooking. This function is available for all cooking zones with the wireless cooking sensor on the normal cookware.

Temperature levels Temperature levels for preparing meals.

Level Temper- Functions ature

1

70 ºC Heating and keeping

warm

Cookware

2

90 ºC Cooking

3

100 ºC Bringing to the boil

4

120 ºC Cooking in a pres-

sure cooker

5

180 ºC Deep-fat frying

Notes on the PerfectCook Sensor function

¡ The wireless cooking sensor measures the temper-

Braised fish

90

ature of the liquid through the silicone base attached to the container. To ensure correct measure-

Egg dishes

ment, the silicone base must be completely covered

Poached eggs

90

by the liquid to be measured.

Potatoes

¡ The frame of the wireless cooking sensor and the silicone base fitted on the cookware must be completely dry before you can start cooking.

Potato dumplings Pasta and cereals

90

¡ Do not remove the wireless cooking sensor during

Rice

90

cooking. After cooking, remove the sensor carefully as the sensor may be hot. ¡ To save energy, use a lid.

Parboiled rice Brown rice

90 90

¡ Position the cookware in such a way that the wire-

Rice, basmati, Thai

90

less cooking sensor is pointing towards the outer

Wild rice

90

side of the hob. ¡ To prevent overheating, never align the cooking

Polenta

90

sensor to any other hot cookware.

Semolina pudding

90

Switching on PerfectCook Sensor Requirement: Connect the wireless cooking sensor.

Soups Instant creams

90

1. Attach the wireless cooking sensor to the cookware.

Desserts

2. Place cookware filled with sufficient liquid on the re-

Rice pudding

90

quired cooking zone and put the lid on.

3. Select the cooking zone on which you have placed

the cookware with the wireless cooking sensor.

4. Touch

and select PerfectCook Sensor.

Porridge Chocolate pudding Other

90 90

5. Then touch the centre of the wireless cooking

Milk

90

sensor.

6. Select the corresponding temperature level for the

­ Boiling

food you want to cook.

a The function is switched on.

a The temperature level and light up. The temper-

Meat

ature display lights up increasingly red until the wa-

Meatballs

100

ter or oil has reached the appropriate temperature for adding the food for cooking. A signal tone sounds.

Chicken Veal

100 100

7. Once the signal tone has sounded, remove the lid

Egg dishes

and add the food. Cook with the lid on.

Boiled eggs

100

Switching off PerfectCook Sensor

Vegetables and legumes

1. Select the cooking zone.

Broccoli

100

2. Set to 0. a The function is switched off. 3. To exit PerfectCook Sensor, touch

and select

Cauliflower Brussels sprouts

100 100

a different cooking mode.

Green beans

100

Recommendations for cooking with PerfectCook Sensor

Chickpeas Peas

100 100

The following table shows the ideal temperature levels

Lentils

100

for a selection of dishes. and

depend on the

Potatoes

amount, condition and quality of the food.

Gnocchi

100

Heating and keeping warm

Potatoes, boiled

100

Sweet potatoes

100

Heating goulash

70

10-20

Pasta and cereals

Heating mulled wine

70

5-15

Durum wheat pasta

100

Fresh pasta

100

­ Poaching

Wholemeal noodles

100

Durum wheat pasta, stuffed

100

Meat

Fresh pasta, stuffed

100

Sausages

90

10-20

Quinoa

100

Fish

Soups

Assisten
15-20
2-5
30-40
25-35 25-35 45-55 8-12 20-30 3-8 5-10
10-15
40-50 10-15 3-5
3-10
20-30 60-90 60-90
5-10
10-20 10-20 30-40 15-30 60-90 15-20 45-60
3-6 30-45 30-45
7-10 3-5 7-10 15-20 5-8 10-12
17

enAssist

Home-made broths

100

Instant soups

100

Desserts

Compote

100

Frozen products

Green beans

100

Cooking in a pressure cooker

60-90 5-10
15-25
15-30

Meat Chicken Veal Vegetables and legumes Vegetables Chickpeas Lentils Beans Potatoes Potatoes Sweet potatoes Pasta and cereals Rice Brown rice Soups Home- made broths

120

15-25

120

15-25

120

3-6

120

25-35

120

10-20

120

25-35

120

10-20

120

10-20

120

6-8

120

12-18

120

20-30

Frying with a large amount of oil Use the lid to heat the oil, and remove it to fry the food.

Meat

Chicken pieces

180

Meatballs

180

Fish

Fish, breaded, battered

180

Vegetables and legumes

Vegetables, breaded, battered 180

Mushrooms, breaded or

180

battered

Desserts

Jam-filled doughnuts and

180

doughnuts

Frozen products

Chips

180

10-15 10-15 10-15 4-8 4-8
5-10
4-8

16.3Wireless cooking sensor
To use PerfectCook Sensor, you must purchase a wireless cooking sensor. You can purchase the wireless cooking sensor from customer service, in our online shop or in a specialist shop www.bosch-home.com.

Connecting the wireless cooking sensor To connect the wireless cooking sensor to the control panel, proceed as follows: 1. Opening the basic settings Page 21 2. Select the cooking sensor setting and select the
“Add new cooking sensor” option. 3. Briefly touch the centre of the wireless cooking
sensor within 30 seconds. After a few seconds, the result of the connection
between the cooking sensor and the control panel appears on the display.

Result

Connected PerfectCook Sensor is available. correctly

Not con- Communication error

nected cor- ¡ Repeat the connection process.

rectly

If the result is still , contact

customer service.

Not con- Communication error

nected cor- ¡ Bluetooth communication error.

rectly

Repeat the connection process.

¡ You have not touched the

centre of the wireless cooking

sensor within 30 seconds of se-

lecting the cooking zone. Re-

peat the connection process.

¡ The battery in the wireless

cooking sensor is flat. Replace

the battery, reset the wireless

cooking sensor and repeat the

connection process.

Resetting the wireless cooking sensor 1. Press the centre of the cooking sensor for approx. 8
– 10 seconds. a During this process, the LED display for the wireless
cooking sensor lights up three times. a When the LED lights up for the third time, it will start
to reset the temperature sensor. 2. Now stop pressing the centre of the wireless cook-
ing sensor. a As soon as the LED goes out, this means that the
wireless cooking sensor has been reset. 3. Repeat the connection process from point 2.

Setting the boiling point The point at which water starts to boil depends on the height of your home above sea level. If the water is boiling too vigorously or not vigorously enough, you can adjust the boiling point. Proceed as follows: Select the “Set boiling point” setting in “Basic settings”, Page 21. The default basic setting is 200­400 m. If the home is located at this height above sea level, do not set the boiling point. Select the setting that matches your home’s height above sea level. Note: The temperature 3/100 ºC is sufficient to boil efficiently. For a more intensive boil, select a lower level.

18

Wireless cooking sensor

17 Wireless cooking sensor Wirelesscookingsensor
To use PerfectCook Sensor, you must purchase a wireless cooking sensor. You can purchase the wireless cooking sensor from customer service, in our online shop or in a specialist shop www.bosch-home.com.
17.1Scope of delivery
After unpacking all of the parts, check for any transport damage and for completeness of delivery. ¡ Wireless cooking sensor ¡ Silicone patch ¡ Template

All adhesives break down over time when they are stored. To prevent this from happening, place the silicone bases on their containers as soon as they are cleaned.
17.3Attaching the wireless cooking sensor
1. Ensure that the silicone patch is completely dry before attaching the cooking sensor.
2. Attach the cooking onto the silicone patch so that it fits perfectly.

17.2Attaching the silicone patch
The silicone patch secures the cooking sensor to the cookware. For fitting on the cookware: 1. The adhesive area on the cookware must be free
from grease. Clean and dry the container thoroughly, and rub the adhesive area using alcohol, for example. 2. Remove the protective film from the silicone patch. Adhere the silicone patch to the outside of the cookware in the correct place using the enclosed template as a guide.

17.4Replacing the battery
If the LED on the wireless cooking sensor does not light up when pressed, the battery is discharged. Changing the battery: 1. Remove the silicone cover from the lower section of
the cooking sensor casing and remove both screws using a screwdriver.

2. Open the cooking sensor lid and remove the battery from the base.

3. Press down all over the surface of the silicone patch, including in the centre.
4. Leave the adhesive to dry for one hour. Do not use or rinse out the cookware during this time.
Note: If the silicone patch comes loose, use a new one. If required, you can purchase a set with five silicone patches from specialist retailers, from our customer service or on our official website www.boschhome.com by quoting the article number 17007119.

!
19

enMeal assistant 3. Insert a new battery, observing the instructions for
the battery poles. Only use premium-quality CR2032 batteries.

Silicone patch Clean and dry before attaching the cooking sensor. Dishwasher safe. Note: The cookware with the silicone patch must not be left to soak for long periods in soapy water.
Window for the wireless cooking sensor Always keep the window clean and dry. Important: 1. Remove dirt and oil splatters regularly. 2. For cleaning, use a cloth or a cotton bud and win-
dow-cleaning solution.

Note: Do not use any metal objects to remove the battery. Do not touch the battery connection points. 4. Close the cap on the cooking sensor. The indentations for the screws on the cap must be aligned with the indentations on the lower section of the housing. Use a screwdriver to tighten the screws and secure the silicone cover on the lower section of the cooking sensor housing.
17.5Cleaning Cooking sensor
Clean with a damp cloth. Do not place in the dishwasher and do not get it wet. When you are not using the cooking sensor, remove it from the cookware and store it in a clean, secure location, away from any heat sources.
18 Meal assistant Mealassistant
All types of food can be prepared with this function. The appliance selects the optimal setting for you. The recipes for the PerfectCook Sensor function are only available after connecting to the wireless cooking sensor.
18.1Activating the meal assistant
1. Select a cooking zone.

Notes ¡ Do not use hard or rough objects such as bristle
brushes or scouring pads to clean the hob, and do not use scouring agents. ¡ Do not touch the window for the wireless cooking sensor with your fingers; this will soil or scratch it.
17.6Declaration of Conformity
BSH Hausgeräte GmbH hereby declares that the appliance with wireless cooking sensor function meets the basic requirements and other relevant provisions of the Directive 2014/53/EU. A detailed Declaration of Conformity in accordance with Directive RED can be found at www.boschhome.com on the product page for your appliance under “Additional documents. The logos and the Bluetooth® brand are registered trademarks and property of Bluetooth SIG, Inc. These trademarks are used by BSH Hausgeräte GmbH under licence. All other trademarks and trade names are owned by the respective companies.

2. Touch

and select .

3. Select the required programme group and food.

4. Follow the instructions on the display.

18.2Cancelling the meal assistant

1. Select the cooking zone.

2. Touch

and switch to a different cooking mode.

a The function is switched off.

20

Childpro of lock

19 Childproof lock Childprooflock
The hob is equipped with a childproof lock. This prevents children from switching on the hob.
19.1Switching on Childproof lock
Requirement: All cooking zones must be switched off. 1. Touch . 2. Touch and follow the instructions on the display. a The hob is locked.

19.2Switching off Childproof lock
Follow the instructions in the display panel. a The lock is released.
19.3Automatic childproof lock
You can also activate the childproof lock automatically every time the hob is switched off. You can find out how to switch the function on and off in the “Basic settings” section Page 21.

20 Wipe protection Wipeprotection
You can use this function to lock the control panel for cleaning so that you do not accidentally change the settings. The lock has no effect on the main switch.
20.1Switching on Wipe protection
Touch . A signal sounds.

a The control panel remains locked for 30 seconds. a After 30 seconds, a signal tone sounds and the
control panel is unlocked.
20.2Switching off Wipe protection
To cancel the function early, follow the instructions on the display.

21 Individual safety switch-off Individualsafetyswitch-off
The safety function is switched on if one cooking zone is in operation for an extended period and you do not change any settings. A message appears on the display and the cooking zone stops heating.

To switch off the display and reset the cooking zone, touch any button.

22 Basic settings Basicsettings
You can configure the basic settings for your appliance to meet your needs.

22.1Overview of the basic settings

Setting

Description and options

Language

Change the display language for the appliance.

Home Connect You can use this function to connect the appliance to your home network and a mobile device.

Hob-based hood control

You can use this function to control certain functions of the extractor hood via the hob.

Signal tones

You can use this function to select warning tones that the appliance is to output.

Duration of the You can use this function to change warning signal the duration of the warning signal.

Button tones

You can use this function to select whether the appliance emits tones when you touch the buttons on the touch display.

Setting Display brightness FlexInduction
MoveMode
Childproof lock
Quick selection Brand logo

Description and options Change the brightness of the display.
You can use this function to set the switch-on mode for the function after the hob has been switched on: Two independent cooking zones or one single zone. You can use this function to change the preset power levels of the three cooking areas of the FlexZone. You can use this function to automatically lock the hob to prevent children from using the appliance without supervision. You can use this function to switch on the power level quickly using the main display. You can use this function to set whether the brand logo is to be displayed when you switch on the hob.

21

Cookware test

Setting ReStart Power limitation
Energy consumption display Cooking sensor

Description and options You can use this function to set how long the appliance saves the most recently used settings when you switch off the appliance. This enables you to limit the total power of the hob, if required, due to the circumstances of your electrical installation. The available settings depend on the maximum power of the hob. You can find precise information on the rating plate. If the function is switched on and the hob has reached the set power limit, is displayed and you cannot select a higher power level. Shows the total energy consumption in kWh between switching the cooking zone on and off. The accuracy of the display depends on various factors such as the voltage quality of the power supply. Add a new wireless cooking sensor.

Setting Setting the boiling point
Cookware test
Appliance information Factory settings

Description and options You can enter your height above sea level to improve the cooking sensor’s accuracy. You can use this function to test the quality of the cookware. You can use this function to call up information about the appliance. Reset all settings to the factory settings.

22.2Calling up basic settings
Requirement: All cooking zones must be switched off. 1. Touch . 2. Drag your finger to scroll through the available set-
tings. 3. To call up the submenu and select the required op-
tion, touch a setting. To return to the previous menu, touch within a submenu. 4. Before you exit the basic settings, save or cancel the settings in the confirmation screen. 5. Touch to exit.

23 Cookware test Cookwaretest
The quality of the cookware affects the speed and the result of the cooking process. You can use this function to test the quality of the cookware. Before the test, ensure that the size of the cookware base corresponds to the size of the cooking zone being used. Access is via the basic settings. Page 21
23.1Carrying out Cookware test
As a single cooking zone, the flexible cooking zone is set in such a way that only the individual item of cookware is checked.

1. At room temperature, place the cookware with approx. 200 ml water in the centre of the cooking zone that best fits the base of the cookware in terms of size.
2. Call up the basic settings and select the “Test cookware” option.
3. Follow the instructions on the display panel. a After 10 seconds, the result appears in the cooking
zone displays. Note: To activate the function, return to the basic settings and select Cookware test.

24 Home Connect HomeConnect
This appliance is network-capable. Connecting your appliance to a mobile device lets you control its functions via the Home Connect app, adjust its basic settings and monitor its operating status. The Home Connect services are not available in every country. The availability of the Home Connect function depends on the availability of Home Connect services in your country. You can find information about this at: www.home-connect.com. The Home Connect app guides you through the entire login process. Follow the instructions in the Home Connect app to configure the settings. Tips ¡ Please consult the documents supplied by
Home Connect. ¡ Please also follow the instructions in the Home Con-
nect app.

Notes ¡ Please note the safety precautions in this instruction
manual and make sure that they are also observed when operating the appliance via the Home Connect app. “Safety”, Page 2 ¡ Hobs are not designed to be left unattended. Always monitor the cooking process. ¡ Operating the appliance on the appliance itself always takes priority. During this time it is not possible to operate the appliance using the Home Connect app. ¡ In networked standby mode, the appliance requires a maximum of 2 W.

22

24.1Setting up Home Connect
Requirements ¡ The appliance is connected to the power supply and
is switched on. ¡ You have a mobile device with a current version of
the iOS or Android operating system, e.g. a smartphone. ¡ The mobile device and the appliance are within range of your home network’s Wi-Fi signal. 1. Download the Home Connect app.
2. Open the Home Connect app and scan the following QR code.

3. Follow the instructions in the Home Connect app.

24.2Overview of the Home Connect settings
You can adjust the settings and network settings for Home Connect by going to your hob’s basic settings. The hob shows the setting “Set using the assistant” if the hob is not connected to the home network. All other settings are only displayed if the hob is already connected to the Wi-Fi.

Setting

Description and options

Set using the assistant

The hob can be set up to automatically log into your home network, or you can do this manually. ¡ Use the assistant to configure the
settings (automatic connection to the home network).1 ¡ Use the assistant to configure the settings: WPS not supported (manually log into your home network).

Connect to app

You can connect the hob to one or more Home Connect accounts.

Set using the app

¡ Off: Only the hob’s current status is displayed in the app.
¡ On1: You can send cooking settings from the app to the hob. The cooking settings that are sent must be confirmed on the hob.

1 Factory setting

Home Connecten

Setting

Description and options

Wi-Fi

You can switch off the hob’s wireless module to disconnect it from the WiFi. ¡ Deactivated: The wireless module
is switched off. ¡ Activated1: Wireless module con-
nected.

Disconnecting from the network

You can delete the saved connections to the Wi-Fi. The network connection is also deleted if you restore the factory settings on your hob.

Appliance info You can display information about Home Connect and the network.

1 Factory setting

24.3Wi-Fi symbol
The Wi-Fi indicator on the main screen changes according to the status and quality of the connection and the availability of the Home Connect server. If you press and hold the symbol for at least two seconds, the display shows a description of the symbol.

24.4Changing settings via the Home Connect app
You can use the Home Connect app to change the settings for the cooking zones and send them to the hob. Requirements ¡ The hob is connected to the Wi-Fi and to the
Home Connect app. ¡ In order to set the hob via the Home Connect app,
the basic setting “Setting via the app” must be switched on. The basic setting is switched on on delivery. If the option for the transmission of settings has been deactivated, only the hob’s operating statuses will be displayed in the Home Connect app. 1. Select the setting in the Home Connect app and send it to the hob. Follow the instructions in the Home Connect app. Settings that you send from the Home Connect app to the hob must be confirmed on the hob. a If cooking settings are transmitted to a cooking zone, the display shows a message. 2. To confirm a setting, touch “Apply”. 3. To discard the setting, touch “Discard”.

24.5Software update
Your appliance’s software can be updated using the software update function, e.g. for the purposes of optimisation, troubleshooting or security updates. To do this, you must be a registered Home Connect user, have installed the app on your mobile device and be connected to the Home Connect server. As soon as a software update is available, you will be informed via the Home Connect app and will be able to start the software update via the app. Once the update has been successfully downloaded, you can start installing it via the Home Connect app if you are in your home network (Wi-Fi). The Home Connect app informs you once installation is successful.

23

enHob-based hood control
Notes ¡ The software update consists of two steps.
­ The first step is the download. ­ The second step is the installation on your appli-
ance. ¡ You can continue to use your appliance as normal
while updates are downloading. Depending on your personal settings in the app, software updates can also be set to download automatically. ¡ Installation takes a few minutes. You cannot use your appliance during installation. ¡ We recommend that you install security updates as soon as possible.
24.6Remote diagnostics
Customer Service can use Remote Diagnostics to access your appliance if you contact them, have your appliance connected to the Home Connect server and if Remote Diagnostics is available in the country in which you are using the appliance. Tip: For further information and details about the availability of Remote Diagnostics in your country, please visit the service/support section of your local website: www.home-connect.com.
25 Hob-based hood control Hob-basedhoodcontrol
If the hob and the extractor hood are Home Connectcompatible, connect the appliances in the Home Connect app. To do this, connect the two appliances to Home Connect and follow the instructions in the app. Notes ¡ Using the controls on the extractor hood always
takes priority. It is not possible to use the hob-based hood control during this time. ¡ You can only connect to the extractor hood via the Home Connect app. Other connection routes are no longer supported.
25.1Resetting Home Connect settings
If you have problems connecting your appliance to the WLAN home network (Wi- Fi) or if you want to log your appliance onto a different WLAN home network (Wi-Fi) , you can reset the Home Connect settings. Note: If you reset the Home Connect settings, the connection to any extractor hood will also be terminated. 1. Touch to open the basic settings. 2. Select the “Hood control” setting. 3. Touch “Disconnect”.
25.2Controlling the extractor hood via the hob
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob or individual cooking zones are switched on or off.

24.7Data protection
Please see the information on data protection. The first time your appliance is registered on a home network connected to the Internet, your appliance will transmit the following types of data to the Home Connect server (initial registration): ¡ Unique appliance identification (consisting of appli-
ance codes as well as the MAC address of the Wi-Fi communication module installed). ¡ Security certificate of the Wi-Fi communication module (to ensure a secure data connection). ¡ The current software and hardware version of your appliance. ¡ Status of any previous reset to factory settings.
This initial registration prepares the Home Connect functions for use and is only required when you want to use the Home Connect functions for the first time. Note: Please note that the Home Connect functions can only be utilised with the Home Connect app. Information on data protection can be retrieved in the Home Connect app.

You can select other settings using the controls on the hob.

Setting the fan

1. In the status bar, touch . 2. Select a fan setting on the control panel.

You can choose between the levels 1, 2 and 3.

To set an intensive setting, touch

or

.

Switching off the fan 1. In the status bar, touch . 2. Select fan setting 0.

Switching on automatic mode 1. In the status bar, touch . 2. Touch auto in the settings area. a auto lights up red. a The fan starts automatically when steam is pro-
duced.

Switching off automatic mode 1. In the status bar, touch . 2. Select fan setting 0.

Setting the hood lighting You can switch the hood lighting on and off using the control panel of the hob.
To switch the lighting on, touch in the status bar.

24

Cleaning and servicingen

25.3Overview of the hood control settings
In the basic settings for your hob, you can adjust the behaviour of your extractor hood depending on whether the hob or individual cooking zones are switched on or off. The display shows the settings only when the appliance has been connected to the extractor hood.

Setting1

Selection

Description

Fan control (automatic start)

¡ Switched off ­ The extractor hood You can set whether/how the fan starts must be switched on manually, if re- when you switch on the hob. quired.
¡ Switched on in automatic mode2 ­ In automatic mode, the hood switches itself on when you switch on any of the cooking zones.
¡ Switched on in standard mode ­ The extractor hood is switched on at a specified setting when a cooking zone is switched on.

Fan run-on

¡ Fan off.

You can set whether/how the contin-

¡ Switched on in automatic mode.2 ues to run when you switch off the hob.

¡ Switched on with standard fan run-

on.

¡ The fan settings cannot be adjusted

when the hob is switched off.

Automatic light activation

¡ Off

You can set whether the lighting for the

¡ On2 ­ The light is switched on when extractor hood switches on automatic-

the hob is switched on.

ally with the hob.

Automatic light deactivation

¡ Off2 ¡ On ­ The light switches itself off
when the hob is switched off.

You can set whether the lighting for the extractor hood switches off automatically with the hob.

Disconnect

–

With this setting, you reset the saved connections to the Wi-Fi or go back to the extractor hood.

1 Depending on the appliance specifications 2 Factory setting (may vary according to model)

26 Cleaning and servicing Cleaningandservicing
To keep your appliance working efficiently for a long time, it is important to clean and maintain it carefully.
26.1Cleaning products
You can obtain suitable cleaning products and glass scrapers from customer service, a retailer or the online shop www.bosch-home.com. ATTENTION! Unsuitable cleaning products may damage the surfaces of the appliance. Never use unsuitable cleaning products. Do not use cleaning products while the hob is still
hot. This may cause marks on the surface.
Unsuitable cleaning products ¡ Undiluted detergent ¡ Detergent intended for dishwashers ¡ Abrasive cleaning products ¡ Aggressive cleaning products such as oven spray
or stain remover ¡ Abrasive sponges ¡ High-pressure or steam jet cleaners

26.2Cleaning the hob
Clean the hob after every use to stop cooking residues from getting burnt on. Requirement: The hob must be cold. Do not allow the hob to cool down if it has sugar stains, rice starch, plastic or aluminium foil on it. 1. Remove heavy soiling using a glass scraper. 2. Clean the hob with a cleaning agent for glass
ceramic. Follow the cleaning instructions on the packaging of the cleaning agent. Tips ¡ You can achieve good cleaning results using a
special sponge for glass ceramic. ¡ If you keep the base of the cookware clean, the
hob surface remains in a good condition.
26.3Cleaning the hob surround
If the hob frame is dirty or stained after use, clean this. Note: Do not use a glass scraper. 1. Clean the hob frame with hot soapy water and a soft
cloth.

25

Troubleshooting

Wash new sponge cloths thoroughly before use.

2. Dry with a soft cloth.

27 Troubleshooting Troubleshooting
You can rectify minor faults on your appliance yourself. Read the troubleshooting information before contacting after-sales service. This will avoid unnecessary costs.
WARNING Risk of injury! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. If the appliance is defective, call Customer Service.
“Customer Service”, Page 28
WARNING Risk of electric shock! Improper repairs are dangerous. Repairs to the appliance should only be carried out
by trained specialist staff. Only use genuine spare parts when repairing the
appliance. If the power cord or the appliance power cable of
this appliance is damaged, it must be replaced with a special power cord or special appliance power cable, which is available from the manufacturer or its Customer Service.

27.1Warnings
If a problem occurs, instructions, warnings or error messages are shown automatically on the display. To eliminate the problem, follow the instructions on the touch display. If required, contact customer service and specify the exact fault code. Notes ¡ If an error occurs, the appliance does not switch to
standby mode. ¡ In order to protect the appliance’s electronic parts
from overheating or surge currents, the hob may temporarily reduce the power level.

27.2Information on the display panel

Fault The hob cannot be switched on.
The touchscreen display is not responding or has frozen. The cooking zone’s power level cannot be increased. Audible signal
The hob is responding in an unusual manner or can no longer be operated correctly. One or all cooking zones have been automatically switched off. The transfer settings function cannot be activated.

Cause and troubleshooting The power supply has been disconnected. Use other electrical appliances to check whether there has been a power failure. The appliance has not been connected as shown in the circuit diagram. Connect the appliance in accordance with the circuit diagram. Electronics fault If you are unable to rectify the fault, inform the technical after-sales service. The control panel is wet or an object is covering it. Dry the control panel or remove the object.
The hob’s total power output has been limited. Change the total power under “Maximum power consumption” in the basic settings. If a very large item of cookware is being used, this may have an effect on the maximum
power level for that half of the hob. Place the cookware back on the hob. There is something on the touch display. 1. Remove the object and reconfigure the hob settings. 2. Do not place hot cookware on the control panel. A fault has occurred in the electronics. 1. Switch off the appliance using the mains fuse or the circuit breaker in the fuse box. 2. Wait a few seconds before reconnecting the appliance.
The electronics have overheated and one or all of the cooking zones have been switched off. There is hot cookware in the vicinity of the control panel. The cooking zone has been switched off to protect the electronics. The cooking zone has overheated and has been switched off to protect the work surface. Electronics fault Touch any button to confirm the fault display. You can continue to cook as normal
without using the Transfer settings function. Contact customer service.

26

Troubleshootingen

Fault The FlexPlus cooking zone cannot be activated.
The wireless cooking sensor display does not light up. The display on the sensor flashes twice. The display on the sensor flashes three times.
/ / The cooking zones do not heat up, and is displayed.

Cause and troubleshooting
Electronics fault Touch any sensor to confirm the fault display. You can use the remaining cooking zones
to continue cooking. Contact the technical after-sales service.
The hob is unable to connect to your home network or the extractor hood. 1. Acknowledge the fault display by touching any of the sensor fields. You can cook as
usual without a connection. 2. If the problem persists, contact our technical after-sales service.
The cooking sensor has overheated and the cooking zone has been switched off. Wait until the cooking sensor has cooled down sufficiently before activating the function
again.
The cooking sensor has overheated and all of the cooking zones have been switched off. When you are not using the cooking sensor, remove it from the cookware and keep it
away from other cooking zones or heat sources. Switch on the cooking zones.
The battery in the cooking sensor is almost flat. The next time you cook, you may be interrupted by the battery running out. Replace the 3 V CR2032 battery. For more information, see the section entitled
“Replacing the battery”, Page 19
The connection to the cooking sensor has been broken. Switch off the function and reactivate it. The cooking sensor is broken/faulty. Contact the technical after-sales service. The wireless cooking sensor is not responding and the display does not light up. Replace the 3 V CR2032 battery. For more information, see the section entitled
“Replacing the battery”, Page 19. If this does not solve the problem, press and hold the symbol on the cooking sensor for
8­10 seconds and then reconnect the cooking sensor to the hob. You can find more information in the section entitled “Connecting the wireless cooking sensor”, Page 18. If the problem persists, contact our technical after-sales service. The battery in the cooking sensor is almost flat. The next time you cook, you may be interrupted by the battery running out. Replace the 3 V CR2032 battery. For more information, see the section entitled “Replacing the battery”, Page 19.
The connection to the cooking sensor has been broken. Press and hold the symbol on the cooking sensor for 8­10 seconds and then reconnect
the cooking sensor to the hob. “Connecting the wireless cooking sensor”, Page 18
The operating voltage is incorrect and outside of the normal operating range. Contact your energy supplier. The hob is not connected correctly. Disconnect the hob from the mains. Connect the hob in accordance with the circuit dia-
gram.
Demo mode is activated. 1. Disconnect the hob from the mains and, after a few seconds, reconnect it. 2. Deactivate demo mode in the basic settings within the next three minutes.

27.3Normal noises from your appliance
An induction hob may sometimes cause noises or vibrations, such as buzzing, crackling, hissing noises, fan noises or rhythmic noises.

27

Disposal

28 Disposal Disposal
28.1Disposing of old appliance
Valuable raw materials can be reused by recycling. 1. Unplug the appliance from the mains. 2. Cut through the power cord. 3. Dispose of the appliance in an environmentally
friendly manner. Information about current disposal methods are available from your specialist dealer or local authority.
29 Declaration of Conformity DeclarationofConformity
BSH Hausgeräte GmbH hereby declares that the appliance with Home Connect functionality conforms to the basic requirements and other relevant provisions of Directive 2014/53/EU. A detailed RED Declaration of Conformity can be found online at www.bosch-home.com among the additional documents on the product page for your appliance.

This appliance is labelled in accordance with European Directive 2012/19/EU concerning used electrical and electronic appliances (waste electrical and electronic equipment – WEEE). The guideline determines the framework for the return and recycling of used appliances as applicable throughout the EU. Hereby, BSH Hausgeräte GmbH declares that the appliance with Home Connect functionality is in compliance with relevant statutory requirements.1 A detailed Declaration of Conformity can be found online at www.bosch-home.co.uk among the additional documents on the product page for your appliance.1

BE

BG

CZ

DK

FR

HR

IT

CY

MT

NL

AT

PL

SE

NO

CH

TR

5 GHz WLAN (Wi-Fi): For indoor use only.

AL

BA

MD

ME

5 GHz WLAN (Wi-Fi): For indoor use only.

2.4 GHz band (2400­2483.5 MHz): Max. 100 mW 5-GHz band (5150­5350 MHz + 5470­5725 MHz): max. 50 mW

DE

EE

LI

LV

PT

RO

IS

UK (NI)

IE

EL

ES

LT

LU

HU

SI

SK

FI

MK

RS

UK

UA

Customer Service

Function-relevant genuine spare parts according to the corresponding Ecodesign Order can be obtained from Customer Service for a period of at least 10 years from the date on which your appliance was placed on the market within the European Economic Area. Note: Under the terms of the manufacturer’s warranty the use of Customer Service is free of charge. Detailed information on the warranty period and terms of warranty in your country is available from our aftersales service, your retailer or on our website. If you contact Customer Service, you will require the product number (E-Nr.) and the production number (FD) of your appliance. The contact details for Customer Service can be found in the enclosed Customer Service directory or on our website.

30.1Product number (E-Nr.) and production number (FD)
You can find the product number (E-Nr.) and the production number (FD) on the appliance’s rating plate. The rating plate can be found: ¡ on the appliance certificate. ¡ on the lower section of the hob. The product number (E no.) can also be found on the glass ceramic. You can also display the customer service index (KI) and the production number (FD) in the basic settings. Page 21 Make a note of your appliance’s details and the Customer Service telephone number to find them again quickly.

1 Only applies to Great Britain 28

31 Test dishes Testdishes
These recommended settings are intended for test institutes to facilitate the testing of our appliances. The tests were carried out using our cookware sets for induction hobs. If required, these accessory sets can be purchased at a later point from specialist retailers, or through our technical after-sales service or our online shop.
31.1Melting the chocolate coating
Ingredients: 150 g dark chocolate (55% cocoa). ¡ 16 cm saucepan without lid
­ Boiling: Power level 1.5
31.2Heating and keeping lentil stew warm
Recipe in accordance with DIN 44550 Initial temperature 20 °C Heating up without stirring ¡ 16 cm saucepan with lid, amount: 450 g
­ Heating up: Duration 1 min. 30 sec., power level 9
­ Simmering: Power level 1.5 ¡ 20 cm saucepan with lid, amount: 800 g
­ Heating up: Duration 2 min. 30 sec., power level 9
­ Simmering: Power level 1.5
31.3Heating and keeping lentil stew warm
E.g.: Lentil diameter 5­7 mm. Initial temperature 20 °C Stir after heating for 1 minute ¡ 16 cm saucepan with lid, amount: 500 g
­ Heating up: Duration approx. 1 min. 30 sec., power level 9
­ Simmering: Power level 1.5 ¡ 20 cm saucepan with lid, amount: 1 kg
­ Heating up: Duration approx. 2 min. 30 sec., power level 9
­ Simmering: Power level 1.5
31.4Béchamel sauce
Milk temperature: 7 °C ¡ 16 cm saucepan without lid, ingredients: 40 g but-
ter, 40 g flour, 0.5 l milk with 3.5% fat content and a pinch of salt Preparing Béchamel sauce 1. Melt the butter, stir in the flour and salt, and heat up the mixture. Heating up: Duration 6 min., power level 2 2. Add the milk to the roux and bring to the boil, stirring continuously. Heating up: Duration 6 min. 30 sec., power level
7 3. Once the Béchamel sauce comes to the boil, leave
it on the cooking zone for a further two minutes. Simmering: Power level 2

Test dishesen
31.5Cooking rice pudding with the lid on
Milk temperature: 7 °C 1. Heat the milk until it starts to rise up. Heat up without a lid. Stir after heating for 10 min. 2. Set the recommended power level and add rice, sugar and salt to the milk. The cooking time, including heating up, is approx. 45 minutes. ¡ 16 cm saucepan, ingredients: 190 g short- grain
rice, 90 g sugar, 750 ml milk with 3.5% fat content and 1 g salt ­ Heating up: Duration approx. 5 min. 30 sec.,
power level 8.5 ­ Simmering: Power level 3 ¡ 20 cm saucepan, ingredients: 250 g short-grain rice, 120 g sugar, 1 l milk with 3.5% fat content and 1.5 g salt ­ Heating up: Duration approx. 5 min. 30 sec.,
power level 8.5 ­ Simmering: Power level 3, stir after 10 minutes
31.6Cooking rice pudding without a lid
Milk temperature: 7 °C 1. Add the ingredients to the milk and heat the mixture up while stirring continuously. 2. Once the milk has reached approx. 90 °C, select the recommended power level and leave it to simmer on a low heat for approx. 50 minutes. ¡ 16 cm saucepan without lid, ingredients: 190 g
short-grain rice, 90 g sugar, 750 ml milk with 3.5% fat content and 1 g salt ­ Heating up: Duration approx. 5 min. 30 sec.,
power level 8.5 ­ Simmering: Power level 3 ¡ 20 cm saucepan without lid, ingredients: 250 g short-grain rice, 120 g sugar, 1 l milk with 3.5% fat content and 1.5 g salt ­ Heating up: Duration approx. 5 min. 30 sec.,
power level 8.5 ­ Simmering: Power level 2.5
31.7Cooking rice
Recipe in accordance with DIN 44550 Water temperature: 20 °C ¡ 16 cm saucepan with lid, ingredients: 125 g long-
grain rice, 300 g water and a pinch of salt ­ Heating up: Duration approx. 2 min. 30 sec.,
power level 9 ­ Simmering: Power level 2 ¡ 20 cm saucepan with lid, ingredients: 250g longgrain rice, 600 g water and a pinch of salt ­ Heating up: Duration approx. 2 min. 30 sec.,
power level 9 ­ Simmering: Power level 2.5

29

enTest dishes
31.8Roasting a pork loin
Initial temperature of the loin: 7 °C ¡ 24 cm pan without lid, ingredients: 3 pork loins,
total weight approx. 300 g, 1 cm thick, and 15 g sunflower oil ­ Heating up: Duration approx. 1 min. 30 sec.,
power level 9 ­ Simmering: Power level 7
31.9Preparing crêpes
Recipe in accordance with DIN EN 60350-2 ¡ 24 cm pan without lid, ingredients: 55 ml batter per
crêpe ­ Heating up: Duration 1 min. 30 sec., power level
9 ­ Simmering: Power level 7
31.10Deep-fat frying frozen chips
¡ Pot dia. 20 cm without lid: ingredients: 2 l sunflower oil. For each frying time: 200 g frozen chips, 1 cm thick. ­ Heating up: Power level 9, until the oil temperature reaches 180 °C. ­ Simmering: Power level 9
30

Thank you for buying a Bosch Home Appliance!
Register your new device on MyBosch now and profit directly from: · Expert tips & tricks for your appliance · Warranty extension options · Discounts for accessories & spare-parts · Digital manual and all appliance data at hand · Easy access to Bosch Home Appliances Service Free and easy registration ­ also on mobile phones: www.bosch-home.com/welcome
Looking for help? You’ll find it here.
Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service directory.

BSH Hausgeräte GmbH Carl-Wery-Straße 34 81739 München, GERMANY www.bosch- home.com A Bosch Company
9001685217
9001685217(030828) en

Valid within Great Britain: Imported to Great Britain by BSH Home Appliances Ltd. Grand Union House Old Wolverton Road Wolverton, Milton Keynes MK12 5PT United Kingdom

References

• Home Appliances Global Website | Bosch
• Bosch home appliances: Experience quality, reliability and precision | Bosch UK
• Home Appliances Global Website | Bosch
• Bosch Service | Service worldwide
• Welcome to MyBosch
• Connect your household | Home Connect

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>