QAZQA 70089 Kansas Modern Outdoor Wall Lamp Instruction Manual
- June 1, 2024
- QAZQA
Table of Contents
QAZQA 70089 Kansas Modern Outdoor Wall Lamp
Product Specifications:
- Model: Kansas WL
- Input Voltage: 220-240V~
- Frequency: 50Hz
- Lamp Socket: E27
- Maximum Wattage: 60W
Product Usage Instructions
Installation:
- Ensure the power is OFF before installation.
- Identify the wires: L=Brown, N=Blue, =Green.
- Connect the corresponding wires to the fixture following the specified connections.
- Secure the fixture in place according to the provided dimensions.
Powering On:
- After installation, turn the power switch to the ON position.
- If there are multiple lighting options, switch to the desired setting (e.g., 2-1, 2-2, 3-1).
- The light should now be operational.
Maintenance:
Regularly clean the fixture using a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that may damage the surface.
FAQ:
How do I change the light bulb?
To change the light bulb, ensure the power is turned off, then carefully
unscrew the old bulb and replace it with a new one of up to 60W maximum
wattage.
What should I do if the light is flickering?
If the light is flickering, first check the bulb connection. Ensure it is
tightly screwed in place. If the issue persists, consider replacing the bulb
with a new one.
Safety Precautions
INSTALLATION INSTRUCTION
DIMENSION
SAFETY INSTRUCTION
Please study the instruction manual and the below information carefully before
installing or using this product.
Please keep this user manual for further reference
- The luminaires may only be installed by authorized and qualified technicians according to the valid regulations for electrical installation.
- Maintenance of the luminaires is limited to their surfaces. During maintenance, no moisture can come into contact with any areas of the terminal connections or voltage control parts.
- The electrical supply must be switched off at the outset, preferably using a switch in the distribution box, before any installation, maintenance or repair work is undertaken.
- Exterior lighting must not be installed during rain.
- Take account of the minimal separation distance from other objects and the room required around the fitting.
- If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.
- Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low-voltage conductors.
- Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on ell electrical components
- Take account of all available technical information.
- Meaning of symbols:
- This icon indicates the level of water-proof and dust-proof
- Protection Closs I: the fitting must be earthed
- Protection Class II: the fitting is doubled insulated and does not require earthing
- Protection Closs Ill: the fitting is low-voltage
- Minimum distance from lighted objects (meters)
- The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceeded; different items require different kind of light sources with different bulb icons
- The armature is designed to work only with the indicated voltage. Different items require different working voltages. (6) The luminaire can be used in combination with a dimmer The luminaire con be dimmed with switch
- The reference light angle and light space of the luminaire
- This luminaire cannot be disposed of together with normal domestic waste in standard rubbish con, but you have to bring it to a staging area for electrical waste
-
- Take note of the symbols when connecting wires:
- L Live conductor
- Earth conductor
- N Neutral conductor
FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert,
The Netherlands
www.qazqa.nl
FittinQ LTD
55 Baker Street, London, WIU 7EU United Kingdom
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>