Eyce PV1 Dry Herb Vaporizer User Manual
- June 1, 2024
- Eyce
Table of Contents
PV1 USER MANUAL
DURABILITY THAT RIPS™
Join the conversation, post and tag about your experience with the Eyce PV1.
EYCEMOLDS
WHAT’S INCLUDED
1x PV1 Vaporizer
1x 3-Ft USB Type-C Charging Cable
1x User Manual
ADDING MATERIAL
- Open the PV1’s silicone bottom lid to reveal the glass lined ceramic oven.
- Grind and densely pack material to better optimize heat transfer.
- Close the bottom lid to allow silicone compactor to firmly pack the herb.
POWER ON/OFF
| Click button 5x quickly to turn the device ON and OFF.
---|---
| Click button 3x quickly to change temperature of AutoFlow™ session.
| Start Temp 410°F/210°C
End Temp 430°F/221°C
| Start Temp 390°F/199°C
End Temp 410°F/210°C
| Start Temp 370°F/188°C
End Temp 390°F/199°C
| Start Temp 350°F/176°C
End Temp 370°F/188°C
USING THE PV1
- The PV1 automatically starts heating when powered on. The light around the button will show the corresponding AutoFlow™ session temperature.
- The PV1’s mouthpiece can be rotated for different ergonomic preferences.
- The PV1 will vibrate when the set temperature has been reached. The number of vibrations corresponds to the set temperature (i.e. 2 vibrations for GREEN LIGHT temperature setting).
- The PV1 will turn off automatically after a 5 minute session.
LIGHT BRIGHTNESS
Press and hold the button to begin cycling the brightness of the LEDs. Release
the button at the desired brightness level.
BATTERY & CHARGING
The PV1 can be used while charging, but the time to fully charge will be
longer.
When charging, the light will flash in the color corresponding to the current
charge level. The light will change to a steady white light when fully
charged.
To check the battery charge level, click the button 1x.
When only 10% battery remains, the PV1 will vibrate.
To check the battery life click the Control Button 1x.
Red Light: 25% Battery
Blue Light: 50% Battery
Green Light: 75% Battery
White Light: 100% Battery
The PV1 will vibrate when 10% remains.
CLEANING THE PV1
To keep your PV1 working optimally, we recommend that all parts that encounter
vapor are cleaned regularly. Soak the mouthpiece in 70%+ isopropyl alcohol as
needed and finish with a rinse of water. For non-removable parts use a cotton
swab dipped in 70%+isopropyl alcohol to clean.
Do not submerge the device in liquid. Do not use abrasive materials to clean
the device, oven or vapor path as damage will occur. After cleaning, ensure
all parts are completely dry before use.
WARRANTY
1 Year Limited Warranty
For full warranty details please visit: eycemolds.com/pages/warranty-policy-
and-claims
WARNINGS
HOT COMPONENTS
- Could cause significant battery damage or fire hazard
- Do not open or touch internal parts when powered on, when hot, or in use. Allow device to cool before cleaning, stirring, opening or any direct interactions with internal heating components.
Factory Reset
While the device is turned off, press and hold the control button for 10
seconds to perform a factory reset.
Disclaimer
User assumes all responsibility, Eyce is not responsible for users who do not
act according to the law. By purchasing this product, user agrees to assume
all risk, including health risks associated with smoking.
Multiple Language
Scan QR code to access the PV1
User Manual in multiple languages.