PROHEAR M037 Bluetooth Ear Muffs User Manual
- June 6, 2024
- PROHEAR
Table of Contents
M037 Bluetooth Ear Muffs
User Manual
READ BEFORE USING
( A ) EM037 Bluetooth Ear Muffs
( B ) Limited Warranty
PRO HEAR provides 1-YEAR WARRANTY.
And we take customer satisfaction as our top priority. If you have any
questions, suggestions, concerns, or issues, please feel free to contact us:
[email protected], Our
friendly customer service team will respond within 24 hours.
(C ) PRO HEAR EM037 FCC Statement BT Note FCC:2AYWU-EM037
NOTE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
US/UK EM-037 Bluetooth Safety Earmuffs
Key Features
- Bluetooth Music and Bluetooth Function
- Premium Padded Headband
- Built-in rechargeable battery and USB charging cord included
- Deep Bass & Truly Stereo & Hi-Fi Sound
- Noise Reduction: NRR 25dB , SNR 30dB
- Breathable and comfortable ear cushions
Introduction
- POWER BUTTON: Press and hold for 3 seconds to power the ON/OFF headset. Voice Assist will announce “Power ON”
- TUNING BUTTON: Press and hold on : Adjust the volume. Short press: Switch song.
- Connect/disconnect Bluetooth : Long press M for 2 seconds: Connect and disconnect Bluetooth.
- USB charging interface: Come with a USB charging cable, connect the USB interface to charge.
- A UX JACK : (1) Extra AUX Cable is provided to connect to audio devices. (2) Power on the ear defenders. (3) Connect it to Mp3 or iPod through AUX cable. (4) LCD-display show: AUX
- Audio Input Mode : Extra AUX Cables are provided to connect to audio devices.
- LED indicator: When bluetooth is not connected, the indicator flashes blue light. When connected to Bluetooth, the indicator light is Blue. The light is red when charging.
PRO HEAR EM-037 Wireless Bluetooth Technology
Forward/Back or Pause/Play： Long press M for 2 seconds to connect or
disconnect Bluetooth. Press the M to pause or play music. Press and hold
on : Adjust the volume. Short press: Switch song.
Answering phone function: Incoming Calls In Bluetooth Mode, incoming
phone calls will cause the music to be muted. There’s a ringtone in M the
headset when a call comes on（If the phone is in silent mode during a call, so
are the headset）. To answer an incoming call, press on the hearing protector
once. To disconnect from a call, press M once more. Tap twice quickly
M to redial (last call) and press M to hang up.
Pairing the Device: Once powered on, long press M makes sure your
Bluetooth-enabled device is scanning/searching for devices. Select “EM037” to
connect to the hearing protector. Once connected successfully, you will hear
“Bluetooth Connected” and the LED on the cup will turn blue. Your Bluetooth
audio volume will be controlled by the headset and your device. The next time
you power up, your hearing protector will automatically connect to your device
and say “Bluetooth Connected”.