the box pro Achat 206 Passive Speaker User Manual
- June 1, 2024
- The Box Pro
Table of Contents
User Manual
Achat 206
Passive Speaker
Thomann GmbH
Hans-Thomann-Straße 1
96138 Burgebrach
Germany
Telephone: +49 (0) 9546 9223-0
Internet:www.thomann.de
29.02.2024, ID: 277960, 277958 (V5)
General information
This document contains important instructions for the safe operation of the
product. Read and follow the safety instructions and all other instructions.
Keep the document for future reference. Make sure that it is available to all
those using the product. If you sell the product to another user, be sure that
they also receive this document.
Our products and documentation are subject to a process of continuous
development. They are therefore subject to change. Please refer to the latest
version of the documentation, which is ready for download under
www.thomann.de.
1.1 Symbols and signal words
In this section you will find an overview of the meaning of symbols and signal
words that are used in this document.
| Signal word | Meaning |
|---|---|
| DANGER! | This combination of symbol and signal word indicates an |
immediate dangerous situation that will result in death or serious injury if
it is not avoided.
WARNING!| This combination of symbol and signal word indicates a
possible dangerous situation that can result in death or serious injury if it
is not avoided.
NOTICE!| This combination of symbol and signal word indicates a possible
dangerous situation that can result in material and environmental damage if it
is not avoided.
Warning signs| Type of danger
| Warning – high-voltage.
| Warning – suspended load.
| Warning – danger zone.
Safety instructions
Intended use
This device is designed for sound reinforcement. Use the device only as
described in this user manual. Any other use or use under other operating
conditions is considered to be improper and may result in personal injury or
property damage. No liability will be assumed for damages resulting from
improper use.
This device may be used only by persons with sufficient physical, sensorial,
and intellectual abilities and having corresponding knowledge and experience.
Other persons may use this device only if they are supervised or instructed by
a person who is responsible for their safety.
Safety
DANGER!
Risk of injury and choking hazard for children!
Children can suffocate on packaging material and small parts. Children can
injure themselves when handling the device. Never allow children to play with
the packaging material and the device. Always store packaging material out of
the reach of babies and small children. Always dispose of packaging material
properly when it is not in use. Never allow children to use the device without
supervision. Keep small parts away from children and make sure that the device
does not shed any small parts (such knobs) that children could play with.
DANGER!
Risk of death from electrical current!
Hazardous voltage may be present at cable ends and screw terminals. The
connection of screw terminals and all maintenance and repair work on the
electrical installation of the device may only be performed by a qualified
electrician. Always perform maintenance and repair work when the device is
free from voltage. Failure to comply may result in electric shock and risk of
fire and loss of life. Always observe all electrical safety instructions
applicable in the country of operation.
DANGER!
Risk of death from electrical current!
The output voltages of modern high-performance amplifiers may result in death
or serious injury. Never touch the bare ends of loudspeaker cables when the
amplifier is on.
WARNING!
Risk of injury due to improper installation!
Improper mounting can lead to serious injuries and significant damage to
property. When installing and operating, make sure to follow the standards and
regulations that apply in your country. In Germany, this is DGUV regulation 17
“Staging and Production Facilities for the Entertainment Industry”. Ensure
that speakers are only mounted by trained specialists.
WARNING!
Risk of injury from falling speakers that were inadequately secured!
If speakers are not properly secured when mounted, they can cause severe
injury and considerable damage by falling. Always secure portable sound
systems (speakers) with two independent safety devices, for example with
safety cables.
WARNING!
Possible hearing damage due to operating the device at a high volume!
The device can produce volume levels that, when operated at a high volume, may
cause temporary or permanent hearing impairment. Over an extended period of
time, even levels that seem to be uncritical can cause hearing damage. Avoid
operating the device at excessively high volumes over an extended period of
time. Decrease the volume level immediately if you experience ringing in your
ears or hearing impairment. If this is not possible, keep a greater distance
or use adequate ear-muffs.
NOTICE!
Damage to the device if operated in unsuitable ambient conditions!
The device can be damaged if it is operated in unsuitable ambient conditions.
Only operate the device indoors within the ambient conditions specified in the
“Technical specifications” chapter of this user manual. Avoid operating it in
environments with direct sunlight, heavy dirt and strong vibrations. Avoid
operating it in environments with strong temperature fluctuations. If
temperature fluctuations cannot be avoided (for example after transport in low
outside temperatures), do not switch on the device immediately. Never subject
the device to liquids or moisture. Never move the device to another location
while it is in operation. In environments with increased dirt levels (for
example due to dust, smoke, nicotine or mist): Have the device cleaned by
qualified specialists at regular intervals to prevent damage due to
overheating and other malfunctions.
NOTICE!
Possible staining due to plasticiser in rubber feet!
The plasticiser contained in the rubber feet of this product may react with
the coating of the floor and cause permanent dark stains after some time. If
necessary, use a suitable mat or felt slide to prevent direct contact between
the device’s rubber feet and the floor.
NOTICE!
Possible property damage to adjacent devices due to magnetic fields.
Speakers generate a static magnetic field. This magnetic field can affect
other neighbouring units and in unfavourable cases damage them. Ensure that
speakers are always a sufficient distance away from sensitive equipment that
may be affected by an external magnetic field.
NOTICE!
Potential property damage due to unsuitable stands!
If the device is mounted on an unsuitable stand, there is a risk that the
stand will fall over and cause damage. Only use stands whose maximum bearing
capacity is at least as high as the weight of the device. Always ensure that
the stand is stable.
Features
Special features of this powerful and compact full-range speaker:
-
2 × 6-inch woofer, 1″ compression tweeter
-
Connection options: 2 lockable NL4 sockets (1+/1–), screw terminals
-
M10 rigging points
-
36-mm pole mount flange
-
Optional horizontal and vertical brackets available:
– the box pro 206 U bracket vertical black (item no. 283312): Vertical mounting bracket black
– the box pro 206 U bracket vertical white (item no. 302854): Vertical mounting bracket white
– the box pro 206 U bracket horizontal black (item no. 283311): Horizontal mounting bracket black
– the box pro 206 U bracket horizontal white (item no. 302855): Horizontal mounting bracket white -
Black textured paint for item no. 277560, white textured paint for item no. 277958
-
Cover (optionally available, item no. 385906)
Installation
Unpack and check carefully there is no transportation damage before using the
unit. Keep the equipment packaging. To fully protect the product against
vibration, dust and moisture during transportation or storage use the original
packaging or your own packaging material suitable for transport or storage,
respectively.
Create all connections while the device is off. Use the shortest possible
high-quality cables for all connections. Take care when running the cables to
prevent tripping hazards.
DANGER!
Risk of death from electrical current!
Hazardous voltage may be present at cable ends and screw terminals.
The connection of screw terminals and all maintenance and repair work on the
electrical installation of the device may only be performed by a qualified
electrician. Always perform maintenance and repair work when the device is
free from voltage. Failure to comply may result in electric shock and risk of
fire and loss of life.
Always observe all electrical safety instructions applicable in the country of
operation.
DANGER!
Risk of death from electrical current!
The output voltages of modern high-performance amplifiers may result in death
or serious injury.
Never touch the bare ends of loudspeaker cables when the amplifier is on.
4.1 Tips on handling speakers
We recommend you to set up the speakers in a way, that the sound signals
can reach the audience unobstructedly. It will often be helpful to mount the
speakers on tripods. Thus, the sound will be evenly spread with maximum range
throughout the audience area.
Always use high grade cable to connect your equipment. Otherwise you won’t
reach maximum sound quality.
For optimum results both impedance and power handling of the speakers must
match the requirements of the amplifier. Always follow the technical
specifications of the speakers! The overall impedance of the connected
loudspeakers must not deceed the minimum output impedance of the amp. The amps
max. RMS output power should be 50 % above the power handling capacity of the
connected speakers.
If you notice distortion during operation, either the amp or the speaker is
overloaded. This may permanently damage the amp or the speaker. Always reduce
the volume when you hear distortion.
4.2 Installation
WARNING!
Risk of injury due to improper installation!
Improper mounting can lead to serious injuries and significant damage to
property.
When installing and operating, make sure to follow the standards and
regulations that apply in your country. In Germany, this is DGUV regulation 17
“Staging and Production Facilities for the Entertainment Industry”.
Ensure that speakers are only mounted by trained specialists.
NOTICE!
Possible property damage to adjacent devices due to magnetic fields.
Speakers generate a static magnetic field. This magnetic field can affect
other neighbouring units and in unfavourable cases damage them.
Ensure that speakers are always a sufficient distance away from sensitive
equipment that may be affected by an external magnetic field.
Mounting options
You can install the device standing or hanging upside down. When in use,
the device must be mounted at a solid surface or clamped to an approved truss.
Standing mounting
NOTICE!
Potential property damage due to unsuitable stands!
If the device is mounted on an unsuitable stand, there is a risk that the
stand will fall over and cause damage.
Only use stands whose maximum bearing capacity is at least as high as the
weight of the device. Always ensure that the stand is stable.
We recommend that the speaker be set up so that the lower edge is located 185
cm above the ground.
For mounting on a commercially available stand (suitable stand for direct
connection: item no. 174340), the flange cover on the bottom of the speaker
must be removed (four screws).
Suspended mounting
The optionally available vertical and horizontal mounting brackets (U
brackets) allow you to attach the speaker stably and securely to the wall,
ceiling or half coupler and thus to trusses. WARNING!
Risk of injury from falling speakers that were inadequately secured!
If speakers are not properly secured when mounted, they can cause severe
injury and considerable damage by falling.
Always secure portable sound systems (speakers) with two independent safety
devices, for example with safety cables.
The load capacity of trusses or other fixtures must be sufficient for the
intended number of devices. The personnel in charge of mounting the suspension
system are responsible for ensuring that the systems are set up and used
safely.
Always work from a stable platform whenever installing, moving or servicing
the device. While you do this, the area underneath the device must be cordoned
off. Only persons directly involved in set-up and removal are authorised to be
in the assembly area.
Installation methods
Connections
| 1,2 | NL4 connections wired in parallel |
|---|---|
| 3 | Screw terminals (2 × 2-pin) with cover for contact protection |
Technical specifications
| the box pro Achat 206 (item no. 277560)| the box pro Achat 206 WH
(item no. 277958)
---|---|---
System| 2-way full-range speaker with built-in crossover
Configuration| 2 × 6-inch woofers, 1 × 1-inch compression tweeter
Input connections| 1 × lockable NL4 socket (1+/1–) (Speaker Twist)
Screw terminals (2 × 2-pin) with cover for contact protection
Output connection| 1 × lockable NL4 socket (1+/1–) (Speaker Twist)
Frequency range| 70 Hz … 20 kHz, –3 dB
Load capacity| 250 W (RMS), 1000 W (peak)
Sensitivity (1 W/1 m)| 95.5 dB
Rated impedance| 8 Ω
Sound pressure level (SPL) max.| 122 dB
Beam angle (H × V)| 90° × 90°
Dimensions (W × H × D)| 200 mm × 568 mm × 223,7 mm
Weight| 12 kg
Surface| Black textured paint| White textured paint
Ambient conditions| Temperature range| 0 °C…40 °C
Relative humidity| 20%…80% (non-condensing)
Frequency response
Further information
| Cover | Optionally available (item no. 385906) |
|---|---|
| Design | Column |
| Monitor inclination | Yes |
| Weatherproof | No |
| Housing | Wood |
| Stand flange | 36 mm |
| Truss-capable | Yes, M10 |
Plug and connection assignment
Introduction
This chapter will help you select the right cables and plugs to connect your
valuable equipment in such a way that a perfect sound experience is ensured.
Please note these advices, because especially in ‘Sound & Light’ caution is
indicated: Even if a plug fits into the socket, an incorrect connection may
result in a destroyed power amp, a short circuit or ‘just’ in poor
transmission quality!
Speaker Twist chassis connector
| 1, + | Signal 1 (in phase) |
|---|---|
| 1, – | Signal 1 (out of phase) |
| 2, + | Signal 2 (in phase) |
| 2, – | Signal 2 (out of phase) |
Protecting the environment
Disposal of the packing material
**** Environmentally friendly materials have been chosen for the packaging.
These materials can be sent for normal recycling. Ensure that plastic bags,
packaging, etc. are disposed of in the proper manner.
Do not dispose of these materials with your normal household waste, but make
sure that they are collected for recycling. Please follow the instructions and
markings on the packaging.
Observe the disposal note regarding documentation in France.
Disposal of your old device
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) as amended.
Do not dispose of your old device with your normal household waste; instead,
deliver it for controlled disposal by an approved waste disposal firm or
through your local waste facility.
When disposing of the device, comply with the rules and regulations that apply
in your country. If in doubt, consult your local waste management facility.
Proper disposal protects the environment as well as the health of your fellow
human beings.
Also note that waste avoidance is a valuable contribution to environmental
protection.
Repairing a device or passing it on to another user is an ecologically
valuable alternative to disposal.
You can return your old device to Thomann GmbH at no charge. Check the current
conditions on www.thomann.de.
If your old device contains personal data, delete those data before disposing
of it.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>