QAZQA 107182 Jeany SL Black 1-Phase Modern Track Light Instruction Manual

QAZQA 107182 Jeany SL Black 1-Phase Modern Track Light

Safety Precautions

TO INSTALL

1. Ensure that the adaptor’s Line is facing with the Line in the track rail.
2. Turn the switch on the adaptor to “OFF”. Then push the adaptor into the track.
3. Then turn the switch on the adaptor to “ON”.

TO REMOVE: Turn off the switch to unlock the adaptor on the track rail.
Removing the adaptor by reversing the above sequence

SAFETY INSTRUCTION

Please study the instruction manual and below information carefully before installing or using this product.
Please keep this user manual for further reference

1. The luminaires may only be installed by authorized and qualified technicians according the valid regulations for electrical installation.

2. Maintenance of the luminaires is limited to their surfaces. During maintenance no moisture can come into contact with any areas of the terminal connections or voltage control parts.

3. The electrical supply must be switched off at the outset, preferably by means of a switch in the distribution box, before any installation, maintenance or repair work is undertaken.

4. Exterior lighting must not be installed during rain.

5. Take account of the minimal separation distance from other objects and the room required around the fitting.

6. If in any doubt, consult a professional, taking local installation requirements into account. Some countries stipulate that lighting may be installed only by registered installers.

7. Clamping screws in electrical connections must be adequately tightened. This is particularly the case with 12V low voltage conductors.

8. Clean with a clean, dry cloth or brush, use no solvents or abrasives. Avoid dampness on all electrical components

9. Take account of all available technical information.

10. Meaning of symbols:
    This icon indicates the level of water-proof and dust-proof
    Protection Class I: the fitting must be earthed
    Protection Class Il: the fitting is doubled insulated and does not require earthing
    Protection Class III: the fitting is low voltage
    Minimum distance from lighted objects (meters)
    The type of lamp and maximum size and wattage indicated in each lighting unit must not be exceed; different items require different kind of light sources with different bulb icons
    The armature is designed to work only with the indicated voltage. Different items require different working voltage.
    The luminaire can be used in combination with a dimmer
    The luminaire can be dimmed by wall switch
    The reference light angle and light space of the luminaire
    This isman cyou be is brind together gith rem i de lettic waste in standard

11. Take note of the symbols when connecting wires:

FittinQ B.V.
Smaragdweg 52, 5527 LB Hapert,
The Netherlands
www.qazqa.nl

FittinQ LTD
55 Baker Street,
London, WIU 7EU
United Kingdom

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>