PhoFuta S821 Desktop Printer User Guide
- June 2, 2024
- PhoFuta
Table of Contents
PhoFuta S821 Desktop Printer
Package Contents
Attention
All pictures in this instruction manual are for illustration purposes only.
The actual product may vary due to product enhancement.
Printer Components
Warning
- Please use our official power adapter to ensure the quality of your printing.
- Please do not touch the print head as an overheated print head may cause undesirable burns.
- The paper cutter is very sharp. Please be careful when handling it. (Only applies to models with paper cutters)
- Please connect to your 2.4 GHz WiFi. (5 GHz is currently not supported)
- When printing, please do not pull the paper by force to prevent affecting your printing experience.
- The optimum working temperature for the printer is around 0°C-40°C. Too high or too low a temperature may affect the printing quality.
Instructions
- Open the cover by pressing the Open Cover Buttons on the two sides of the printer.
- Take out a random paper roll and tear the edge of the paper roll.
- Install the paper roll back into the paper compartment and pull the paper out of the Paper Output Slot.
Hint: How to differentiate the front and back of the printing paper Take a piece of printing paper and scratch both sides of the paper with your fingernails. The front side is the side with colours. Install the paper with the front side facing upward. Our product can print paper in different sizes. Please adjust the paper holder on the right to match the width of the printing paper. To achieve the best result, please use our genuine printing paper.
Connect to App
Step 1: Please search for “Phomemo” on your phone’s app market and
download the App.
Step 2: Turn on the printer, open the app, and connect to the printer by
following the instructions on the App.
Step 3: Choose the file you want to print on the App, You may check the
print preview and start printing.
Warning
Please ensure your Bluetooth is turned on. Make sure to put your phone near
the printer. lf you’re connecting through WiFi, please connect to the 2.4 GHz
WiFi, not theS GHz WiFi.
Connect to the computer
Step 1: Connect one end of the data cable to your computer and the other
end to the printer’s USB port. Connect your printer to a power source and turn
on your printer.
Step 2: Enter our official website and download the printer’s drivers.
Install the printer’s driver.
Official website: http://S821.phomemo.com/
Step 3: Add the printer to your computer and establish a connection. Once
the connection is established, you can print your documents from your
computer.
Tip: If you wish to obtain more tutorials on how to install the driver,
please open your Pho memo APP> Profile> Use Tutorial to obtain more guidance
Printer State
Official printing paper type
- Normal thermal paper: Does not contain Bisphenol-A.
- Writable Quick-drying thermal paper: Thermal paper that does not contain an in
- Bisphenol-A can be written on and dries ink quickly.
- The printing papers mentioned above are official
- Any issues with your printer arising from using non-official printing papers will not be covered under our warranty policy.
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:{!) This device may not cause harmful interference, and {2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, under part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC RF exposure statement
The equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance between 20cm of the radiator your body. Radio Standards
Specification RSS-Gen, issue 5- English This device contains licence-exempt
transmitter(s)/receiver(s) that comply with Innovation, Science and Economic
Development Canada’s licence-exempt RSS(s). Operation is subject to the
following two conditions: This device may not cause interference. This device
must accept any interference, including interference that may cause undesired
operation of the device.
RF exposure statement
The equipment complies with the IC Radiation exposure limit set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
Warranty Card
Product certification
Inspector: Delivery date
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>