LIFFMUSE Visual Timer for Kids User Guide

LIFFMUSE Visual Timer for Kids

Specifications:

• Short Timing: 99 minutes 59 seconds
• Long Timing: 99 days 24 hours
• Volume Adjustment: High, Low, Silent, Vibration
• Warranty: One-year warranty from date of purchase

Product Usage Instructions

Time Settings
Short Timing (99 minutes 59 seconds):

To start positive timing:

1. Long-press the scroll wheel for 1.5 seconds to reset the timing area to zero.
2. Short-press the scroll wheel or the button on the back to start timing.

To pause or resume timing:

• During timing, short-press the scroll wheel or the button on the back.
• To restart timing, long-press the scroll wheel for 1.5 seconds to reset to zero.

Countdown Timer:
Long Timing (99 days 24 hours):

1. Long-press the scroll wheel for 5 seconds to switch to long timing mode.
2. Adjust days by scrolling the wheel, then adjust hours.
3. Press the scroll wheel or the button on the back to start the long timing.

Volume Adjustment and Screen On/Off
Volume Adjustment:

1. In idle state, double-click the scroll wheel button to enter volume adjustment mode.
2. Scroll the wheel to select High Volume, Low Volume, Silent, or Vibration.

Screen On/Off

1. In any state, long-press the button on the back to turn off the screen.
2. To turn the screen back on, short-press the button on the back.
3. After 60 seconds of inactivity, the backlight will automatically turn off.

FAQ :

1. Q: What is the warranty coverage for this product?
   A: This product comes with a one-year warranty from the date of purchase. However, damages caused by improper use, maintenance, or storage are not covered under warranty. Additionally, warranty coverage requires a valid purchase receipt or invoice as proof of purchase date.

User Guide

Time Settings

1. After installing the batteries, the product screen will display for 1 second and then default to clock setting mode.
2. Start by setting the hours. Scroll the wheel to increase or decrease, then press the wheel or the button on the back to confirm.
3. After confirmation, proceed to set the minutes. Scroll the wheel to set the minutes, and press the wheel or the button on the back to confirm and exit the setting.
   Note: To readjust the clock, double-click the button on the back and repeat steps 2-3. During the clock setting process, long-press the scroll wheel to reset to zero, and it will automatically exit the clock setting if there’s no operation for 30 seconds. Short Timing (99 minutes 59 seconds)

Count Up Timing

1. Long-press the scroll wheel for 1.5 seconds to reset the timing area to zero, then short-press the scroll wheel or the button on the back to start positive timing.
2. During timing, short-pressing the scroll wheel or the button on the back can pause or resume timing.
   Note: When timing is in progress or paused, scrolling the wheel has no effect. To restart timing, long-press the scroll wheel for 1.5 seconds to reset to zero, and then you can set or start timing again.

Count Up Timing

1. Scroll the wheel to enter the minutes setting for the countdown timer, and the minute value will start flashing. Scroll the wheel to set the minutes.
2. After 2.5 seconds of inactivity, it will automatically switch to seconds setting, and the second value will start flashing. Scroll the wheel to set the seconds. After 2.5 seconds of inactivity, it will automatically exit the setting, and the value will stop flashing.
3. After setting the countdown time, press the scroll wheel or the button on the back to start the countdown. For every sixtieth of the countdown, one segment of the progress bar on the display disappears until the countdown ends, and the progress bar is completely empty.
   • When the time is up, it will emit 1-minute beeping sound, and the backlight and the value will flash. Press any button to dismiss the reminder and display the previously set countdown duration.
   • Note: During the setting process, pressing the scroll wheel or the button on the back will directly exit the setting and start the countdown.

Long Timing (99 days 24 hours)

1. Long-press the scroll wheel for 5 seconds to switch to the long timing mode, where “D” represents days and “H” represents hours.
2. By default, the scroll wheel enters the day setting for long timing, with the day value flashing. Scroll the wheel to adjust the days.
3. After 2.5 seconds of inactivity, it will switch to the hour setting, with the hour value flashing. Scroll the wheel to adjust the hours. After 2.5 seconds of inactivity, it will exit the setting, and the value will stop flashing.
4. After setting the long countdown, press the scroll wheel or the button on the back to start the long timing. For every sixtieth of the countdown, one segment of the progress bar on the display disappears until the countdown ends, and the progress bar is completely empty.
5. When the time is up, it will emit 1-minute beeping sound, and the backlight and the value will flash. Press any button to dismiss the reminder and display the previously set countdown duration.

Volume Adjustment and Screen On/Off

1. In the idle state, quickly double-click the scroll wheel button to enter the volume adjustment mode. Scroll the wheel to select the order of modes:
   High Volume  Low Volume Silent Vibration

2. In any state, long-press the button on the back to turn off the screen. In the screen-off state, timing is cleared, but the clock remains unaffected. Short-press the button on the back to turn the screen back on.

3. After 60 seconds of inactivity, the backlight will automatically turn off. Press any button to turn the backlight back on.

Warranty Information

This product comes with a one-year warranty from the date of purchase. The following cases are not eligible for warranty coverage:

1. Damage caused by improper use, maintenance, or storage, or damage resulting from force majeure.
2. Inability to provide a valid purchase receipt or invoice to prove the product’s purchase date.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>