KARCHER K 2 Power Control Compact High Pressure Washer Instructions

: June 4, 2024
: Karcher

KARCHER K 2 Power Control Compact High Pressure Washer

KARCHER-K-2-Power-Control-Compact-High-Pressure-Washer-product-
image

KARCHER-K-2-Power-Control-Compact-High-Pressure-
Washer-1

KARCHER-K-2-Power-Control-Compact-High-Pressure-
Washer-2 KARCHER-K-2-Power-Control-
Compact-High-Pressure-Washer-3

General notes

Read these original operating instructions and the enclosed safety instructions before using the device for the first time. Proceed accordingly. Keep both books for future reference or for future owners.

KÄRCHER Home & Garden app

Installation and initial startup information
Information about the areas of application
Tips & Tricks
FAQ with detailed troubleshooting
Connection to the KÄRCHER Service Centre The app can be downloaded here:
- GOOGLE PLAY
- APP STORE

Trademarks

Google Play™ and Android™ are trademarks or registered trademarks of Google Inc.
Apple® and App store® are trademarks or registered trademarks of Apple Inc.

Environmental protection

The packing materials can be recycled. Please dispose of packaging in accordance with the environmental regulations.
Electrical and electronic appliances contain valuable, recyclable materials and often components such as batteries, rechargeable batteries or oil, which – if handled or disposed of incorrectly – can pose a potential danger to human health and the environment. However, these components are required for the correct operation of the appliance. Appliances marked by this symbol are not allowed to be disposed of together with the household rubbish.
Cleaning work producing in oily waste water, e.g. washing engines, washing undercarriages etc., may only be performed at washing stations with an oil separator. Working with detergents may only be performed on watertight surfaces with connection to the waste water sewage system. Do not allow detergent to enter waterways or the soil.
Notes on the content materials (REACH)
Current information on content materials can be found at: www.kaercher.de/REACH

Intended use

Use the high-pressure cleaner in private households only. The high-pressure cleaner is intended for cleaning ma-chines, vehicles, buildings, tools, façades, terraces, garden machines etc. using a high-pressure water jet.

Accessories and spare parts

Only use original accessories and original spare parts. They ensure that the appliance will run fault-free and safely. Information on accessories and spare parts can be found at www.kaercher.com.

Scope of delivery

The scope of delivery for the appliance is shown on the packaging. Check the contents for completeness when unpacking. If any accessories are missing or in the event of any shipping damage, please notify your dealer.

Description of the device

The maximum amount of equipment is described in these operating instructions. Depending on the model used, there are differences in the scope of delivery (see packaging).
For the illustrations, refer to the graphics page Illustration A

Transport wheel
Storage for spray lance
Storage / parking position for high-pressure gun
Power Control spray lance dirt grinder for stubborn dirt, pressure level: HARD
Click-Vario Power Power Control spray lance for the most common cleaning tasks, pressure levels: HARD / MEDIUM / SOFT / MIX
Power Control high-pressure gun
Clamp for connecting / disconnecting the high-pres- sure hose
High-pressure gun lever
High-pressure gun lock
Trigger “0/OFF” / “I/ON”
Mains connection with mains plug
Storage hook for power cord
Carrying handle
Transport handle, telescoping
Quick coupling for high-pressure hose
Type plate
High-pressure hose
Water connection with integrated sieve
Detergent suction hose
Water connection coupling
**Garden hose with commonly available coupling
- Fabric reinforced
- Diameter of at least 1/2 inch (13 mm)
- Length at least 7.5 m
*Washing brush, suitable for working with detergents
*Foam nozzle for powerful detergent foam
Detergent container optional, ** additionally required

Safety devices

CAUTION
Missing or modified safety devices
Safety devices are provided for your own protection. Never modify or bypass safety devices.

Power switch

The power switch prevents unintentional operation of the device.

High-pressure gun lock

The lock locks the lever of the high-pressure gun and prevents the device from starting unintentionally.

Auto-stop function

If the lever of the high-pressure gun is released, the pressure switch turns off the pump and the high-pres-sure jet stops. The pump switches on again when the le-ver is pressed.

Symbols on the device

Do not aim the high-pressure jet may at per-sons, animals, live electrical equipment or the device itself.
Protect the device against frost.
The device may not be directly connected to the public drinking water network

Assembly

For the illustrations, refer to the graphics page. Fit the supplied loose parts onto the device before starting up the device.

Fitting the wheels

Fasten and secure the wheels to the device. Illustration B

Installing the handles

Attach the transport handle.
Attach the carrying handle.
Illustration C

Installing the water connection coupling

Screw the water connection coupling onto the water connection on the device. Illustration D

Initial startup

Place the device on a flat and level surface.
Insert the high-pressure hose into the quick coupling until it audibly latches into place. Illustration E
Press the clamp for the high-pressure hose together and pull out of the high-pressure gun. Illustration F
Insert the high-pressure hose into the high-pressure gun.
Press the clip in until it latches into place.
Check for a secure connection by pulling on the high-pressure hose.
Plug the mains plug into a mains socket.

Water supply
For the connection values, see the type plate or chapter Technical data.
Observe the water distribution company regulations. ATTENTION
Damage through contaminated water Contamination in the water can damage the pump and the accessories.
KÃ„RCHER recommends using the KÃ„RCHER water filter for protection(special accessory, order number 4.730-059).

Connection to the water line
ATTENTION
Hose coupling with Aquastop on the water connection of the device Damage to the pump
Never use a hose coupling with Aquastop on the water connection of the device.
You can use an Aquastop coupling on the tap.

Plug the garden hose onto the water connection coupling.
Connect the garden hose to the water line.
Open the water tap fully.
Illustration G

Operation

A TTENTION
Pump running dry
Damage to the device
If pressure does not build up in the device after 2 min-utes then switch the device off and proceed according to the instructions in chapter Troubleshooting guide.

Power Control System
Note
The sensitivity of materials can vary greatly depending on age and condition. The recommendations are there-fore not binding.

High-pressure operation
ATTENTION
Damage to painted or sensitive surfaces Surfaces can be damaged when the jet is too close to the surface or an unsuitable spray lance is used. Maintain a minimum spray distance of 30 cm when cleaning painted surfaces.
Do not clean car tyres, paint or sensitive surfaces such as wood with the dirt grinder.

Insert a spray lance into the high-pressure gun and lock it by turning it 90°. Illustration H
Switch the device on (“I/ON”).
Unlock the lever of the high-pressure gun.
Press the lever of the high-pressure gun.
The device switches on.

Operation with a washing brush

ATTENTION
Paint damage
Damage to surfaces through a dirty brush
Ensure that the washing brush is free from dirt or other particles before using it.
Note The device operates at low pressure when using washing brushes. This means that detergent can be mixed with the water.

Insert the washing brush into the high-pressure gun and turn by 90° to fasten it.

Operation with detergent
DANGER
Failure to adhere to the safety data sheet Incorrect handling of the detergent can seriously dam-age your health
Observe the safety data sheet of the detergent manufacturer, in particular the instructions on personal protective equipment.
Note
Detergent can only be mixed into the jet at low pressure. Note
KÄRCHER detergents ensure fault-free operation. Ask us for a consultation, request our catalogue or our detergent information sheets.

Pull the desired length of the detergent suction hose out of the casing. Illustration I
Hang the detergent suction hose in a container with detergent solution.
Use the Click-Vario Power spray lance.
Turn the spray lance to “MIX”.
The detergent solution is mixed with the water jet during operation.
You can optionally use the foam nozzle.
- Connect the foam nozzle to the detergent bottle. Illustration J
- Insert the foam nozzle into the high-pressure gun and turn by 90° to fasten it.

Recommended cleaning method

Spray the detergent sparingly on the dry surface and let it work for a while (do not let it dry).
Rinse off the loosened dirt with the high-pressure jet.

After operation with detergent

Flush the device with clear water for approx. 30 seconds.

Interrupting operation

Release the lever of the high-pressure gun.
The device switches off when the lever is released. The high pressure in the system is retained.
Lock the lever of the high-pressure gun. Illustration K
Place the high-pressure gun with the spray lance in the parking position.
Switch the device off “0/OFF” during work breaks longer than 5 minutes.

Ending operation

Release the lever of the high-pressure gun.
Close the water tap.
Press the lever of the high-pressure gun for 30 sec-onds.
The pressure remaining in the system is discharged.
Release the lever of the high-pressure gun.
Lock the lever of the high-pressure gun.
Disconnect the device from the water supply.
Switch off the device “0/OFF”.
Pull the mains plug out of the socket.

Transport

CAUTION
Failure to observe the weight Risk of injury and damage Be aware of the weight of the device during transportation.
Carrying the device

1. Lift up the device by the carrying handle, and carry it.

Pulling the device

Pull the transport handle out.
Pull the device via the transport handle.

Transporting the device in a vehicle

Secure the device against slipping and tipping over.

Storage

CAUTION
Failure to observe the weight Risk of injury and damage Be aware of the weight of the device during storage.

Storing the device

Place the device on a level surface.
Disconnect the spray lance from the high-pressure gun.
Disconnect the high-pressure gun from the highpressure hose.
Disconnect the high-pressure hose from the device.
Store the high-pressure hose on the device.
Store the mains connection cable and accessories on the device.

Observe the additional notes before storing the device for a long period of time, see chapter Care and service. Frost protection

ATTENTION Danger of frost
Incompletely emptied devices can be destroyed by frost.
Completely empty the device and accessories. Protect the device from frost. The following requirements must be satisfied:

The device is disconnected from the water supply.
The high-pressure hose is removed.

Switch the device on “I/ON”.
Wait for a maximum of 1 minute until no more water escapes from the high-pressure connection.
Switch off the device.
Store the device in a frost-protected room, together with all accessories.

Care and service

DANGER
Danger of electric shock Injuries due to touching live parts Switch off the device. Remove the mains plug. The device is maintenance-free, i.e. you do not need to perform any maintenance work. Clean the sieve in the water connection

ATTENTION
Damaged sieve in the water connection
Damage to the device through contaminated water Check the sieve for damage before inserting it in the water connection. If necessary, clean the sieve in the water connection.

Remove the water connection coupling.
Pull the sieve out using flat pliers.
Clean the sieve under running water. Illustration L
Insert the sieve into the water connection.

Clean the detergent filter
Clean the detergent filter before longer periods of storage.

Pull the filter off the detergent suction hose.
Clean the filter under running water. Illustration M

Troubleshooting guide

Malfunctions often have simple causes that you can remedy yourself using the following overview. When in doubt, or in the case of malfunctions not mentioned here, please contact your authorised Customer Service.

DANGER
Danger of electric shock Injuries due to touching live parts Switch off the device. Remove the mains plug.
Device not running

Press the lever of the high-pressure gun. The device switches on.
Check that the voltage specified on the type plate corresponds to the voltage of the power source.
Check the mains connection cable for damage. Device does not reach required pressure

The water supply is too low

Open the water tap fully.
Check the water inlet for an adequate flow rate.

The sieve in the water connection is dirty.

Pull the sieve in the water connection out using flat pliers.
Clean the sieve under running water.

Air is in the device.

Vent the device:
- Switch on the device without a connected spray lance for a maximum of 2 minutes.
- Press the high-pressure gun and wait until the water escaping from the high-pressure gun is free of air bubbles.
- Connect the spray lance.

Strong pressure fluctuations

Clean the high-pressure nozzle:
- Use a needle to remove dirt from the nozzle drill.
- Rinse the high-pressure nozzle from the front with water.
Check the water supply volume.

Device leaking

The device leaks a small amount for technical reasons. If the leak is severe, request authorized Customer Service.

Detergent is not sucked in

Use the Click-Vario Power spray lance and turn it to “MIX”.
Clean the filter on the detergent suction hose.
Check the detergent suction hose for kinks.

Warranty

The warranty conditions issued by our relevant sales company apply in all countries. We shall remedy possible malfunctions on your appliance within the warranty period free of cost, provided that a material or manufacturing defect is the cause. In a warranty case, please contact your dealer (with the purchase receipt) or the next authorized customer service site. (See overleaf for the address)

Technical data

KARCHER-K-2-Power-Control-Compact-High-Pressure-
Washer-5

EU Declaration of Conformity

We hereby declare that the machine described below complies with the relevant basic safety and health requirements in the EU Directives, both in its basic design and construction as well as in the version placed in cir-culation by us. This declaration is invalidated by any changes made to the machine that are not approved by us.
Product: High-pressure cleaner
Type: 1.673-xxx
Currently applicable EU Directives
2000/14/EC
2014/30/EU
2006/42/EC (+2009/127/EC)
2011/65/EU
Harmonised standards used
EN 50581
EN 55014-1: 2017
EN 55014-2: 2015
EN 60335-1
EN 60335-2-79
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
Conformity evaluation procedure used
2000/14/EC: Appendix V
Sound power level dB(A)
Measured: 88
Guaranteed: 90
The signatories act on behalf of and with the authority of the company management.
Documentation supervisor: S. Reiser Alfred Kärcher SE & Co. KG Alfred-Kärcher- Str. 28 – 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212 Winnenden, 2020/08/01