Hongding K9 Wifi Camera User Manual
- June 2, 2024
- Hongding
Table of Contents
Hongding K9 Wifi Camera
Product Information
Specifications
- Model: -777750
- SKU: $$111146666
Product Usage Instructions
1. Assembly
Follow the provided assembly instructions to set up the product correctly.
2. Power On
Connect the product to a power source and turn it on using the designated power button.
3. Operation
Use the product according to its intended purpose. Refer to the user manual for specific operational details.
4. Maintenance
Regularly clean and maintain the product as per the maintenance guidelines to ensure optimal performance.
Frequently Asked Questions
- Q: How do I troubleshoot if the product is not working?
- A: Check the power source, and connections, and refer to the troubleshooting section in the user manual for guidance.
- Q: Can I disassemble the product for cleaning?
- A: Only disassemble the product as instructed in the user manual for cleaning purposes to avoid damage.
- Q: Is the product water-resistant?
- A: Refer to the product specifications to determine if it is water-resistant. Avoid exposing non-water-resistant products to moisture.
Product Overview
APP Download
Scan the QR code below with your phone to download the V380Pro APP, install and register to log in.
Wi-Fi Connection
- Connect the camera to the power supply.
After about ten seconds, you will hear a prompt saying ” Please scan the QR code on the camera and wait for the connection”. Indicating that the camera has started normally and is waiting for a connection.
- In case of abnormal situations, please reset the camera.
2. Open the V380 Pro APP, tap the “+” in the upper right corner, scan the QR code on the camera, select the WiFi you want to connect to, enter the password, and confirm.
3. Aim the camera lens at the QR code on your phone screen. After hearing the prompt “Network Configuration Received” press “Voice prompt of scanning successfully”.
4. Just wait for the camera to automatically connect to the network, and you can achieve remote monitoring.
For more questions, please check the “My” – “FAQ” section in the V380 Pro APP or contact your dealer.
FCC Statement
- This device should be installed and operated with a minimum distance 20cm between the radiator and your body.
- This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.