SAMSUNG RAC122-0 Air Conditioner User Manual
- June 2, 2024
- Samsung
Table of Contents
RAC122-0 Air Conditioner
“`html
Specifications
- Model: AR*CYA****
- Power Supply: AC 100-240V ~ 50/60Hz
- Cooling Capacity: XXXX BTU
- Refrigerant: R-32
- Filter Type: 4-in-1 Care Filter
- Control: Remote Control
Product Usage Instructions
Safety Information
It is important to read and understand the safety information
provided in the manual before using the air conditioner. Pay
special attention to warning, caution, and important notes
throughout the manual.
Indoor Unit Overview
The indoor unit consists of various components including air
intake, air filter, 4-in-1 Care filter, WindFree panel, airflow
blades, power button, room temperature sensor, and display.
Remote Control Operation
Ensure the remote control is properly paired with the indoor
unit. Use the remote control to select operation modes such as
cooling, heating, fan-only, and more. Refer to the manual for
detailed instructions on operating the remote control.
Cleaning and Maintenance
Regular cleaning and maintenance are essential for optimal
performance of the air conditioner. Follow the provided schedule
for cleaning the filters and unit components. Use a soft cloth
dampened with water to clean the surfaces of the unit.
Smart Features
Explore the various smart features of the air conditioner
including Power Smart Features, WindFree Cooling function, Fast
function, 5 Step Cooling function, Quiet function, Auto clean
function, Freeze Wash function, Time Scheduling, and more. Refer to
the manual for detailed instructions on utilizing these
features.
FAQ
Q: How often should I clean the air filters?
A: It is recommended to clean the air filters every two weeks
for optimal performance.
Q: Can I use the air conditioner without the remote
control?
A: While the remote control provides convenient operation, basic
functions like power on/off can be controlled directly on the
unit.
“`
Air conditioner
User manual
AR*CYA****
· Thank you for purchasing this Samsung air conditioner. · Before operating
this unit, please read this manual carefully and retain it for future
reference.
Contents
Safety Information
4
Safety Information
4
At a Glance
11
Indoor Unit Overview
11
Display
12
Remote Control Overview
13
Replacing the remote control batteries
13
Remote Control Operation
14
Selecting an operation mode
14
To set the temperature · To adjust the fan speed · To adjust the airflow direction
15
Smart Features
16
Power Smart Features
16
WindFree Cooling function
16
AI Auto mode · AI Energy mode
17
Auto mode · Cool mode
18
Dry mode · Fan mode
19
Variety Smart Features
20
Fast function
20
5 Step Cooling function
21
Quiet function
22
Electricity consumption check · Beep function
23
Auto clean function
24
Freeze Wash function
26
Display lighting function · Wi-Fi function (SmartThings app)
27
Time Scheduling
28
Timed on/ Timed off function
28
good’sleep function
29
2 English
Cleaning and Maintenance
30
Schedule
30
Cleaning
31
Appendix
35
Troubleshooting
35
SmartThings app
38
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems) This marking on the
product, accessories or literature indicates that the product and its
electronic accessories (e.g. charger, headset, USB cable) should not be
disposed of with other household waste at the end of their working life. To
prevent possible harm to the environment or human health from uncontrolled
waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material
resources. Household users should contact either the retailer where they
purchased this product, or their local government office, for details of where
and how they can take these items for environmentally safe recycling. Business
users should contact their supplier and check the terms and conditions of the
purchase contract. This product and its electronic accessories should not be
mixed with other commercial wastes for disposal. For more information on safe
disposal and recycling, visit our website www.samsung.com/in/support or
contact our Helpline numbers – 1800 40 7267864 (1800 40 SAMSUNG)
1800 5 7267864 (1800 5 SAMSUNG).
Correct disposal of batteries in this product
This marking on the battery, manual or packaging indicates that the batteries
in this product should not be disposed of with other household waste at the
end of their working life. Where marked, the chemical symbols Hg, Cd or Pb
indicate that the battery contains mercury, cadmium or lead above the
reference levels in EC Directive 2006/66.
English 3
Safety Information
Safety Information
WARNING: Read This Manual Read and follow all safety information and
instructions before installation, use, or maintenance of this appliance.
Incorrect installation, use, or maintenance of this appliance can result in
death, serious injury, or property damage. Keep these instructions with this
appliance. This manual is subject to change. For the latest version, visit
www.samsung.com. Because the instructions in this manual cover various models,
the characteristics of your air conditioner may differ slightly from those
described. If you have any questions, please contact your service provider or
visit www.samsung.com.
Notices and notes
To make you aware of safety messages and highlighted information, we use the
following notices and notes throughout this manual:
WARNING Hazards or unsafe practices that may result in severe personal injury
or death.
CAUTION Hazards or unsafe practices that may result in minor personal injury
or property damage.
IMPORTANT Information of special interest
NOTE Supplementary information that may be useful
4 English
Safety Information
WARNING: Low burning velocity material (This appliance is filled with R-32.)
The user and installer guides should be read carefully.
The user and installer guides should be read carefully.
The service guide should be read carefully.
FOR GENERAL
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
FOR INSTALLATION
WARNING Use a power cord with this product’s power specifications or higher
and use the power cord for this appliance only. In addition, do not use an
extension cord. · Extending the power cord may result in electric shock or
fire. · Do not use an electric transformer. This may result in electric shock
or fire. · If the voltage/frequency/rated current condition is different, it
may cause fire. The installation of this appliance must be performed by a
qualified technician or service company. Do not attempt to install the air
conditioner yourself. · Failing to do so may result in electric shock, fire,
explosion, problems with the product, or injury
and may also void warranty on the installed product. Install an Isolation
Switch next to the Air Conditioner (but not on the panels of the Air
Conditioner) and circuit breaker dedicated to the air conditioner. · Failing
to do so may result in electric shock or fire.
English 5
Safety Information
Safety Information
Fix the outdoor unit firmly so that the electric part of the outdoor unit is
not exposed. · Failing to do so may result in electric shock, fire, explosion,
or problems with the product. Do not install this appliance near a heater, or
flammable material. Do not install this appliance in a humid, oily or dusty
location, in a location exposed to direct sunlight and water (or rain). Do not
install this appliance in a location where gas may leak. · This may result in
electric shock or fire. Never install the outdoor unit in a location such as
on a high external wall where it could fall. · If the outdoor unit falls, it
may result in injury, death or property damage. This appliance must be
properly grounded. Do not ground the appliance to a gas pipe, plastic, water
pipe, or telephone line. · Failing to do so may result in electric shock,
fire, and explosion. · Make sure to use a socket-outlet with ground. The
product shall be stored in a room with no ignition sources (e.g. open flames,
gas appliance, electric heater, etc.). · Note that the refrigerant has no
odour. CAUTION Install your appliance on a level and hard floor that can
support its weight. · Failing to do so may result in abnormal vibrations,
noise, or problems with the product. Install the drain hose properly so that
water drains correctly. · Failing to do so may result in water overflowing and
property damage. Avoid adding drain to
waste pipes as odours may arise in the future. When installing the outdoor
unit, make sure to connect the drain hose so that draining is performed
correctly. · The water generated during heating by the outdoor unit may
overflow and result in property
damage. In particular, in winter, if a block of ice falls, it may result in
injury, death or property damage. Do not install the product in a place where
thermo-hygrostat is needed (such as server room, machinery room, computer
room, etc.) · Those places do not provide guaranteed operation condition of
the product therefore performance can be poor in these places.
6 English
Safety Information
FOR POWER SUPPLY
WARNING When the circuit breaker is damaged, contact your nearest service
centre. Do not pull or excessively bend the power line. Do not twist or tie
the power line. Do not hook the power line over a metal object, place a heavy
object on the power line, insert the power line between objects, or push the
power line into the space behind the appliance. · This may result in electric
shock or fire. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard. CAUTION When not using the air conditioner for a long period
of time or during a thunder/lightning storm, cut the power at the circuit
breaker. · Failing to do so may result in electric shock or fire.
FOR USING
WARNING If the appliance is flooded, please contact your nearest service
centre. · Failing to do so may result in electric shock or fire. If the
appliance generates a strange noise, a burning smell or smoke, cut off the
power supply immediately and contact the nearest service centre. · Failing to
do so may result in electric shock or fire. If the air conditioner
malfunctions or requires repair, immediately stop its operation and disconnect
the entire power system. Then consult the authorized service personnel. In the
event of a gas leak (such as propane gas, LP gas, etc.), ventilate immediately
without touching the power line. Do not touch the appliance or power line. ·
Do not use a ventilating fan. · A spark may result in an explosion or fire.
English 7
Safety Information
Safety Information
To reinstall the air conditioner, please contact your nearest service centre.
· Failing to do so may result in problems with the product, water leakage,
electric shock, or fire. · Delivery service for the product is not provided.
If you reinstall the product in another location,
additional construction expenses and an installation fee will be charged. ·
Especially, when you wish to install the product in an unusual location such
as in an industrial
area or near the seaside where it is exposed to salt in the air, please
contact your nearest service centre. Do not touch the circuit breaker with wet
hands. · This may result in electric shock. Do not turn the air conditioner
off with the circuit breaker while it is operating. · Turning the air
conditioner off and then on again with the circuit breaker may cause a spark
and result in electric shock or fire. After unpacking the air conditioner,
keep all packaging materials well out of the reach of children, as packaging
materials can be dangerous to children. · If a child places a bag over its
head, it may result in suffocation. Do not touch the airflow blade with your
hands or fingers during heating. · This may result in electric shock or burns.
Do not insert your fingers or foreign substances into the air inlet/outlet of
the air conditioner. · Take special care that children do not injure
themselves by inserting their fingers into the product. Do not strike or pull
the air conditioner with excessive force. · This may result in fire, injury,
or problems with the product. Do not place an object near the outdoor unit
that allows children to climb onto the machine. · This may result in children
seriously injuring themselves. Do not use this air conditioner for long
periods of time in badly ventilated locations or near infirm people. · Since
this may be dangerous due to a lack of oxygen, open a window at least once an
hour. Do not use means to accelerate the defrost operation or to clean, other
than those recommended by Samsung. Do not pierce or burn. Be aware that
refrigerants may not contain an odour. If any foreign substance such as water
has entered the appliance, cut off the power supply and contact the nearest
service centre. · Failing to do so may result in electric shock or fire. Do
not attempt to repair, disassemble, or modify the appliance yourself. · Do not
use any fuse (such as copper, steel wire, etc.) other than the standard fuse.
· Failing to do so may result in electric shock, fire, problems with the
product, or injury.
8 English
Safety Information
CAUTION
Do not place objects or devices under the indoor unit. · Water dripping from
the indoor unit may result in fire or property damage. Check that the
installation frame of the outdoor unit is not broken at least once a year. ·
Failing to do so may result in injury, death or property damage. To prevent
personal injury, make sure that you change the directions of the horizontal
airflowblades after stopping the movements of the vertical airflowblade. (In
case of adjusting the horizontal airflow manually) When the air conditioner
does not operate properly for cooling or heating, there is a possibility of
refrigerant leakage. If any leakage, stop operation, ventilate the room, and
consult your dealer immediately for recharging refrigerant. The refrigerant is
not harmful. However, if it comes in contact with fire, it may generate
harmful gases and there is risk of fire. During transportation of the indoor
unit, the pipe lines shall be covered with brackets for protection. Do not
move the product with holding the pipe lines. · It may cause gas leakage. Do
not install the product in a ship or a vehicle (such as a campervan). · Salt,
vibration or other environmental factor may cause the product malfunction,
electric shock or
fire. Do not stand on top of the appliance or place objects (such as laundry,
lighted candles, lighted cigarettes, dishes, chemicals, metal objects, etc.)
on the appliance. · This may result in electric shock, fire, problems with the
product, or injury. Do not operate the appliance with wet hands. · This may
result in electric shock. Do not spray volatile material such as insecticide
onto the surface of the appliance. · As well as being harmful to humans, it
may also result in electric shock, fire or problems with the
product. Do not drink the water from the air conditioner. · The water may be
harmful to humans. Do not hit, shake, drop, or attempt to disassemble the
remote control. When replacing the remote control batteries, keep them out of
the reach of infants. · If an infant eats batteries, contact a doctor
immediately. When replacing the remote control batteries, be careful not to
get the battery fluid on your skin. · Battery fluid is harmful to humans.
English 9
Safety Information
Safety Information
Do not touch the pipes connected with the product. · This may result in burns
or injury. Do not cut or burn the refrigerant container or pipings. Do not
point the air direction to the fireplace or heater. Do not use this air
conditioner to preserve precision equipment, food, animals, plants or
cosmetics, or for any other unusual purposes. · This may result in property
damage. Avoid directly exposing humans, animals or plants to the airflowfrom
the air conditioner for long periods of time. · This may result in harm to
humans, animals or plants.
FOR CLEANING
WARNING Do not clean the appliance by spraying water directly onto it. Do not
use benzene, thinner or alcohol to clean the appliance. · This may result in
discolouration, deformation, damage, electric shock or fire. Before cleaning,
servicing, or performing maintenance, make sure to disconnect the product from
its power source and wait until the fan stops. · Failing to do so may result
in electric shock or fire. CAUTION Take care when cleaning the surface of the
heat exchanger of the outdoor unit since it has sharp edges. · This should be
done by a qualified technician. Please contact your installer or service
centre. Do not clean the inside of the air conditioner by yourself. · For
cleaning inside the appliance, contact your nearest service centre. · When
cleaning the filter, refer to the descriptions in the ‘Cleaning’ section. ·
Failing to do so may result in damage, electric shock or fire. · Make sure to
prevent any injury from sharp edges of the surface when handling the heat
exchanger.
10 English
Indoor Unit Overview
The appearance of the actual product may differ slightly from the image below.
01 02 03 04
05 07
06
08
01 Air intake 02 Air filter 03 4-in-1 Care filter 04 WindFree panel 05 Airflow blade (up and down)
09
06 Airflow blade (left and right) 07 Power button/Remote control receiver 08
Room temperature sensor 09 Display
NOTE · The product ships with 4-in-1 Care filter and
the manual included. (For ARCYAM, ARCYNA** models)
At a Glance
English 11
Indoor Unit Overview
Display
01 02 03 04 05
01 Temperature indicator (numeric) Filter reset indicator ( ) Electricity
consumption indicator (numeric) Auto clean indicator ( )
02 AI Energy indicator
03 AI Auto indicator
04 Timer indicator good’sleep indicator
05 Wi-Fi indicator
NOTE
· When the Wi-Fi is turned on, the indicator blinks three times and then turn
on.
NOTE
· If the Wi-Fi indicator blinks for 10 seconds when operation starts, it means
that the air conditioner is not connected to Wi-Fi. See “SmartThings app” on
page 38 and connect the air conditioner to Wi-Fi.
· When connected to Wi-Fi, the air conditioner can gather and learn your user
patterns so that it can run in AI Auto mode.
At a Glance
12 English
At a Glance
Remote Control Overview
Most operating instructions in this manual require using the remote control.
01 Set temperature indicator
05
02 Timer option indicator
01 02
03 Operation mode indicator
06
04 Options indicator
07
05 Low battery indicator
03
06 Transmit indicator
08
07 Fan speed indicator
04
09
10
08 WindFree indicator
09 Vertical air swing indicator
16
10 Horizontal air swing indicator
11
17
11 Power button
12 Temperature button
13 Timer button
12
18
14 Fan speed/Fast button
15 Direction button/Selection button
13
16 Vertical air swing button
19
17 Mode button
14
20
18 WindFree/5 Step Cooling button
19 Horizontal air swing button
20 Options/Clean button
21
21 SET button/Temperature type button()
15
Replacing the remote control batteries
Two 1.5V AAA batteries
English 13
At a Glance
Remote Control Operation
You can use the air conditioner easily by selecting a mode and then by
controlling the temperature, fan speed, and air direction.
Selecting an operation mode
To change the current mode between Auto, Cool, Dry, and Fan, press the (Mode)
button. You can use AI Auto mode after Wi-Fi is connected.
NOTE · You can use the Cool, Dry modes in the following operation
range.
Mode
Cool
Dry
Indoor temperature
16 °C to 32 °C
18 °C to 32 °C
Outdoor temperature 15 °C to 52 °C
15 °C to 52 °C
Indoor humidity
Relative humidity of 80 % or less 1
_
¹ If the air conditioner operates in Cool mode in a high-humidity environment
for an extended period of time, condensation may occur.
You can switch between Celsius and Fahrenheit indications on the remote
control.
Press and hold for 3 or more seconds.
NOTE
· The temperature indications on the indoor unit are not switched. · This
function is canceled when the remote control batteries are
replaced. In this case, run this function again.
14 English
To set the temperature
To control the temperature in each mode, press the (Temperature) button:
Mode
Temperature control
AI Auto/Auto/Cool Adjust by 1 from 16 to 30 .
Dry
Adjust by 1 from 18 to 30 .
Fan
No temperature control.
At a Glance
To adjust the fan speed
Select from the following fan speeds in each mode:
Mode AI Auto/Auto/Dry
Cool Fan
Available fan speeds
(Auto)
(Auto), (Low), (Med), (High), (Turbo) (Low), (Med), (High), (Turbo)
To adjust the airflow direction
Keep the airflow in a constant direction by stopping the movements of the vertical and horizontal airflow blades.
In operation
or
NOTE
· If you adjust the vertical airflow blade manually, it may not close
completely when you turn off the air conditioner.
· Always use the remote control to adjust the airflow blades. Do not move the
blades by hand. They may not operate normally.
· You cannot control the vertical airflow direction in Cool mode when the
good’sleep function is on.
English 15
Smart Features
Power Smart Features
WindFree Cooling function
Use the WindFree Cooling function to enjoy a mild breeze coming through fine
holes in the WindFree panel instead of air coming directly through the airflow
blades. In Cool/Dry/Fan mode
NOTE · To cancel this function, press the (WindFree) button again. · When the
WindFree Cooling function is on, the air conditioner
automatically controls the temperature and fan speed to keep your room mild
and comfortable. · When the WindFree Cooling function is canceled, the air
conditioner returns to the original fan speed and air comes out of the airflow
blades. · In Cool mode, the recommended set temperature during the WindFree
Cooling operation is 24 to 26 . · You can use the WindFree Cooling function in
Cool, Dry, or Fan mode. · You cannot select the Quiet function during the
WindFree Cooling operation. · Selecting the WindFree Cooling function cancels
the Fast, 5 Step Cooling, and airflow direction ( , ) functions.
16 English
AI Auto mode
Use AI Auto mode to automatically operate any of Cool, Dry, and WindFree Cooling modes depending on the learned user patterns gathered from an external server via Wi-Fi module. The favourite temperature and operation mode are also set based on the current temperatures (indoor/outdoor) and the gathered user patterns.
Select Auto.
Smart Features
NOTE
· You can use this mode after Wi-Fi is connected. Otherwise, Auto mode is
activated.
· In AI Auto mode, the (AI Auto) and (Wi-Fi) indicators appears on the display
of the indoor unit.
· If the gathered user patterns are not sufficient, the set temperature is set
based on the user’s activity time and indoor/ outdoor temperatures.
· The set temperature is controlled within the range of 22 to 28 in AI Auto
mode. You can also change it manually.
· An automatically changed set temperature is shown on the display of the
indoor unit.
· When you press (Mode) in AI Auto mode, the mode is cancelled. · If you
change the set temperature in AI Auto mode, the
air conditioner operates with the changed set temperature.
AI Energy mode
· Use AI Energy mode to save electricity consumed by the operating air
conditioner. This mode can be turned on or off from the SmartThings app only.
· The amount of saved electricity is calculated while in AI Auto mode only. ·
AI Energy indicator( ) lights up on the display of the indoor unit. · The
amount of saved electricity is calculated from the moment
when the air conditioner is turned on. · The amount of saved electricity may
differ even when using the same
device, depending on the ambient environment (e.g., indoor/outdoor temperature
and humidity), set temperature, and operation mode. · Note that the amount of
saved electricity also may differ even under the same operating environment
conditions, depending on how it was measured. · To have powerful cooling, turn
off AI Energy mode.
English 17
Power Smart Features
Auto mode
Use Auto mode to perform the powerful cooling function to automatically reach the desired temperature. When the difference between the room temperature and the set temperature decreases, the air conditioner controls the fan speed and airflow direction.
Select Auto.
NOTE
· If Wi-Fi cannot be connected or the Wi-Fi function is not supported, this
Auto mode is automatically activated instead of AI Auto mode.
· When the room temperature is higher than the set temperature, the air
conditioner automatically produces cool air.
Cool mode
Use Cool mode to stay cool in hot weather.
Select Cool.
NOTE
· For comfort, keep the temperature difference between the indoor and outdoor
air within 5 .
· After selecting Cool mode, select the desired function, temperature, and fan
speed.
To cool more quickly, select a lower temperature and a faster fan speed.
To save energy, select a higher temperature and a slower fan speed.
As the room temperature nears the set temperature, the compressor motor will
slow down to save energy.
Smart Features
18 English
Dry mode
Use Dry mode in rainy or humid weather.
Select Dry.
NOTE
· The proper set temperature range for dehumidifying operation is 24 to 26 .
If you feel that the current humidity seems high, use a lower set temperature.
Fan mode
Use Fan mode to run the air conditioner like a floor fan, providing a breeze without cooling.
Select Fan.
NOTE
· If the air conditioner will not be used for an extended period of time, run
it in Fan mode for 3 to 4 hours to dry the internal components.
· The outdoor unit does not operate in Fan mode. This is normal and not a
fault with the air conditioner.
Smart Features
English 19
Variety Smart Features
Fast function
Use the Fast function to quickly cool your room. This function is the most powerful cooling function provided by the air conditioner. You can select this function in Cool mode.
In Cool mode
Press and hold for 3 or more seconds.
NOTE
· You can change the airflow direction, but you cannot change the set
temperature and the fan speed.
· Selecting the Fast function cancels the WindFree Cooling, 5 Step Cooling,
good’sleep, and Quiet functions.
· You can also start the Fast function from the Options menu:
In Cool mode
Select Fast.
Smart Features
20 English
Smart Features
5 Step Cooling function
Use the 5 Step Cooling function to adjust the cooling speed by changing the
operation rate of the outdoor unit.
In Cool mode NOTE
· Each time you press the button in Cool mode, you can adjust the operation
rate of the outdoor unit in 5 steps. It switches in the following order: 80%
60% 40% 120% Cool mode. The remote control display shows:
When it is switched to Cool mode, the air conditioner starts running for the
preset temperature.
· In the entry to the 5 Step Cooling function, the outdoor unit operates at
80% of operation rate and the vertical air swing of the indoor unit starts.
· You can adjust the desired temperature, fan speed, and airflow direction.
· When the operation rate of the outdoor unit is set to any of 80%, 60%, and
40%, you can save energy in cooling.
· When there are many people at the room in hot weather, select 120% of
operation rate for strong cooling.
· When using the 5 Step Cooling function, the operating rate displayed on the
remote controller and the actual power consumption ratio of the product maybe
different depending on the indoor/outdoor temperature environment.
English 21
Variety Smart Features
Quiet function
Use the Quiet function to reduce the unit’s operating noise. You can select this function in Cool mode.
In Cool mode
Select Quiet.
NOTE
· You can change the set temperature and the airflow direction, but you cannot
change the fan speed.
· Selecting the Quiet function cancels the WindFree Cooling, 5 Step Cooling,
good’sleep, and Fast functions.
Smart Features
22 English
Electricity consumption check
Use the Usage function to check the amount of electricity consumed by using the air conditioner. The amount consumed is displayed on the indoor unit display for a few seconds, and the set temperature appears.
In operation
Select Usage.
The value range displayed is between 0.1 kWh and 99 kWh. Electricity
consumption is calculated from the moment the air conditioner turns on. The
value is reset when the air conditioner turns off.
NOTE · The usage shown on the indoor unit display may slightly differ
from the amount of electricity actually consumed. · You can view electricity
consumption only when the air
conditioner is operating.
Beep function
Use the Beep function to turn on or off the beep that sounds when you press a button on the remote control.
Select Beep.
Smart Features
English 23
Variety Smart Features
Auto clean function
Use the Auto clean function if the indoor unit produces odors.
Activating Auto clean
To activate Auto clean, press the 3 seconds. The indoor unit display shows:
(Options) button for at least
If the air conditioner is off, Auto clean starts immediately. If the air
conditioner is running, Auto clean starts as soon as the air conditioner turns
off.
NOTE · You can also activate Auto clean from the Options menu:
Select Clean.
· Once Auto clean is selected, it is always activated whenever the air
conditioner turns off.
· Auto clean runs for 10 to up to 30 minutes depending on internal dry
conditions. The indoor unit display shows the cleaning progress from 1% to
99%.
· If you start another function while Auto clean is progressing, Auto clean
pauses and will resume when the other function stops.
· When Auto clean completes, the air conditioner turns off.
· Auto clean does not run after Fan mode.
Smart Features
24 English
Canceling Auto clean
To cancel Auto clean while it is running, follow the procedure below:
Press and hold for 3 or more seconds.
or
Select Clean.
NOTE · Canceling Auto clean does not deactivate it.
Deactivating Auto clean
To deactivate Auto clean, follow the procedure below while the air conditioner
is in operation:
Press and hold for 3 or more seconds.
or
Select Clean.
Smart Features
English 25
Variety Smart Features
Freeze Wash function
Use the Freeze Wash function to wash away microorganisms or dust on the
surface of the indoor heat exchanger by freezing and thawing operation.
In operation stop condition,
Select Wash.
NOTE
· The Freeze Wash function runs from 30 to 80 minutes (running the outdoor
unit) depending on either temperature or humidity in the room, through the
following cycle:freezing defrosting drying of the indoor unit heat exchanger.
· The indoor unit display shows the cleaning progress (1-99 %).
· To use another function while in Wash operation, press the (Power) button on
the remote control to stop operation.
· When the room temperature is low or its humidity is high, the Freeze Wash
function may not work.
· Before finishing the Freeze Wash function, the airflow blade is closed and
then the drying operation starts.
· During the Freeze Wash cycle, when you hear a creaking noise from the indoor
unit: DON’T worry because it is normal and it can happen! it will disappear at
the end of the cycle.
· The area around the indoor unit may appear blurred or condensation may form
while the Freeze Wash function is in operation.
· You may see frost or water on the surface of the outdoor unit’s valve while
the Freeze Wash function is in operation.
· It is recommended to use the Wash function once every 2 weeks. Otherwise,
dust or dirt that is difficult to be removed may accumulate in the heat
exchanger.
Smart Features
26 English
Smart Features
Display lighting function
Use the Display lighting function to turn on or off the lighting of the indoor unit display.
Select Display.
NOTE · If you change the current mode or function when the Display
lighting function is on, the display lighting turns on for 5 seconds and then
turns off again. · To turn off the Display lighting function, run the method
above again or turn the product off and on.
Wi-Fi function (SmartThings app)
Turn on the Wi-Fi function to pair your smartphone with the air conditioner.
Press and hold for 5 or more seconds.
NOTE
· When you turn on the Wi-Fi function, your smartphone pairs with the air
conditioner, the (Transmit) indicator blinks, and appears on the remote
control display for a few seconds.
· Once your smartphone is connected with the air conditioner, you can control
it via the wireless Internet using the SmartThings app installed on your
smartphone.
· For more information about how to prepare your smartphone for connection and
how to control the air conditioner using the SmartThings app, see “SmartThings
app” on page 38.
· To turn on or off the Wi-Fi, press and hold (Mode) and for 5 seconds.
In order to launch the SmartThings app, press and hold the (Timer) button for
5 seconds, which enables to connect
the air conditioner.
English 27
Time Scheduling
Timed on/ Timed off function
Use the Timed on/off function to turn the air conditioner on or off after a
duration. Scheduling durations before the air conditioner turns on or off
helps use the air conditioner economically.
Select On or Off
(Set the duration.)
NOTE
· To cancel the Timed on/off function, set the duration to 0.0. · When you
start the Timed on/off function, the (Timer)
indicator appears on the indoor unit display. · You can set the duration to
from 0.5 hours to 24 hours. · You cannot set the same duration for both Timed
on and Timed
off functions.
Combining Timed on and Timed off
When the air conditioner
is off
Example: Timed on 3 hours, Timed off 5 hours
The air conditioner turns on 3 hours after the last time you press the (SET)
button to start the Timed on/off function, remains on for 2 hours, then turns
off again.
When the air conditioner
is on
Example: Timed on 3 hours, Timed off 1 hour
The air conditioner turns off 1 hour after the last time you press the (SET)
button to start the Timed on/off function, remains off for 2 hours, then turns
on again.
Smart Features
28 English
good’sleep function
Use the good’sleep function to save energy while you are sleeping. You can select this function in Cool mode.
In Cool mode
(Select .)
(Set the duration.)
NOTE
· To cancel the good’sleep function, set the duration to 0.0. · When you start
the good’sleep function, the (Timer) indicator
appears on the indoor unit display. · You can set the duration to from 0.5
hours to 12 hours. · The recommended set temperatures while the good’sleep
function is on are:
Mode Cool
Recommended set temperature
25 to 27
Optimal set temperature
26
· The good’sleep function can operate while the WindFree Cooling function is
on.
· Selecting the good’sleep function cancels 5 Step Cooling, Fast, and Quiet
functions.
Smart Features
English 29
Schedule
Task
Run the Auto clean function.
Run the Freeze Wash function.
How often As needed Once every two weeks
Clean the filter.
Once every two weeks
Replace the 4-in-1 Care filter.
Once every 3 months
Clean the WindFree panel At least once a month
By whom Owner Owner Owner Owner Owner
Clean the exterior of the indoor unit.
As needed
Owner
Clean the exterior of the outdoor unit.
At least once a year
Owner
Replace the remote control batteries
As needed
Owner
Apply corrosion inhibitor on outdoor unit.
(Only if installed near salt water such as an ocean)
At least once a year
Clean inside the indoor or outdoor unit.
Once a year
Inspect the units, electrical connections, refrigerant tubes, and protections.
Once a year
Qualified technician Qualified technician Qualified technician
Instruction
“Auto clean function” on page 24.
“Freeze Wash function” on page 26.
“Cleaning the filter” on page 32.
“Replacing the 4-in-1 Care filter” on page 33.
“Cleaning the WindFree panel” on page 34.
“Cleaning the outside of the indoor unit” on page
31.
“Cleaning the heat exchanger on the outdoor
unit” on page 31.
“Replacing the remote control batteries” on page
13.
Contact your service provider.
Contact your service provider.
Contact your service provider.
Cleaning and Maintenance
30 English
Cleaning
Soft brush
Tepid damp cloth
Cleaning the outside of the indoor unit
1 Turn off the air conditioner and wait until the fan stops.
2 Disconnect the power supply. 3 Use a soft brush or tepid damp cloth to clean
the
exterior.
WARNING · Do not clean the appliance by spraying water
directly onto it. Water entering the unit may result in electric shock or fire
that could cause death, serious injury, or property damage:
CAUTION · Do not use an alkaline detergent to clean the indoor
unit display. · Do not use sulphuric acid, hydrochloric acid, or organic
solvents such as paint thinner, kerosene, acetone, benzene, or alcohol to
clean the unit surfaces.
Cleaning the heat exchanger on the outdoor unit
1 Turn off the air conditioner and wait until the fan stops.
2 Disconnect the power supply. 3 Spray water on the heat exchanger to remove
dust
and other debris.
CAUTION · Do not use sulphuric acid, hydrochloric acid, or
organic solvents such as paint thinner, kerosene, acetone, benzene, or alcohol
to clean the unit surfaces. · If you need to inspect or clean the inside of
the heat exchanger on the outdoor unit, contact a local service centre for
help.
English 31
Cleaning and Maintenance
Cleaning
Cleaning the filter
Clean the air filter every two weeks or when the (filter-cleaning reminder)
appears on the indoor unit display. The time between cleanings may vary,
depending on the usage and environmental conditions.
Vacuum cleaner
Soft brush
30 minutes
Mild detergent
1 Slide the filter off of the unit. 2 Use a soft brush or vacuum cleaner to
remove any dust or debris on the filter. 3 Soak the filter in a solution of
water and mild detergent for 30 minutes. 4 Rinse the filter and let it air dry
in a well-ventilated area that is out of direct sunlight. 5 Reinstall the
filter. 6 Reset the filter-cleaning reminder:
In operation
Select Filter Reset.
CAUTION · Take care not to damage the filter during cleaning. · Do not scrub the air filterwith a hard-bristle brush or another cleaning utensil. · Do not expose the air filter to direct sunlight when drying it
Cleaning and Maintenance
32 English
Replacing the 4-in-1 Care filter (For ARCYAM, ARCYNA** models)
Replace 4-in-1 Care filters once every three years. Replacement cycle may
differ depending on the environment and usage time.
4-in-1 Care filter
CAUTION · Do not clean the 4-in-1 Care filterwith water. Failing to do so may
result in damage to the filter.
NOTE · To replace a 4-in-1 Care filter, purchase a new one at a service
centre. · To use the 4-in-1 Care filter for a long time in an environment
where fish cooking and smoking cause
odour, ventilate the place by opening a window.
English 33
Cleaning and Maintenance
Cleaning
Cleaning the WindFree panel
Clean the WindFree panel at least once a month.
1 Pull the airflow blade open. 2 Hold and pull both sides of the WindFree
panel until it comes free from the air conditioner. 3 Use a soft brush or
vacuum cleaner to remove any dust. 4 Hang the WindFree panel in the grooves at
the bottom left and right. 5 Align the projections of the WindFree panel with
the grooves at the top, middle, and bottom of the front
panel. 6 After inserting the WindFree panel, press the top 4 places and the
bottom 3 places by hand so that there
is no gap to the panel. CAUTION
· If you attach the WindFree panel without the airflow blade being open, it
may become obstructed by the WindFree panel and may not open properly.
34 English
Cleaning and Maintenance
Troubleshooting
If the air conditioner is not operating normally, refer to the troubleshooting
guide below.
Problem
The air conditioner stops working.
Cannot change the temperature.
Solution
· Make sure the unit is receiving power. · Check the circuit breaker. If it is
flipped off, flip it on again and
restart the unit. If the problem persists, contact your service provider. ·
The Timed off function may have turned off the unit. Turn on the unit again.
· Check if the unit is in Fan or Fast mode. If so, you cannot change the set
temperature; the unit automatically controls the set temperature.
· Check the set temperature. In Cool mode, cooling occurs only when the set
temperature is lower than the current temperature.
Improper airflow temperature.
· Use the (Temperature) button on the remote control to change the set
temperature.
· Check if the air filter is blocked with dirt or debris. If the air filter is
blocked, the cooling performance may decrease. Clean the air filter regularly
(page 32).
· Check if the outdoor unit is covered or is installed near obstacles. Remove
the coverings and obstacles.
· Check if doors or windows are open. This may cause poor circulation or
performance. Close all doors and windows.
· Check if the pipe length between the units exceeds the maximum pipe length
(see “Typical installation” in the Installation manual). If so, the cooling
performance may decrease.
Cannot change the airflow direction.
· Check if the good’sleep function is on in Cool mode. If so, you cannot control the airflow direction.
Cannot change the fan speed.
· Check if the unit is in Auto, Dry, or Fast mode or the good’sleep function is on in Cool mode. In these conditions, you cannot control the fan speed; the unit automatically controls the fan speed.
Appendix
English 35
Troubleshooting
Problem
The remote control does not work.
The Timed on/off function does not work.
Solution
· Replace the batteries in the remote control. · Make sure the remote control
can send an unobstructed signal to
the unit. · Keep bright lights away from the unit. Light from fluorescent
bulbs or neon signs may interrupt the signal from the remote control.
· Make sure to press the when setting the timer.
(SET) button on the remote control
The indicator on the indoor unit display blinks continuously.
Odors are coming from the unit during regular operation.
The indoor unit display shows an error message.
The unit is generating noise.
· Press the (Power) button to turn off the unit, or disconnect the power plug.
· If the indicator light on the indoor unit display continues blinking,
contact your service provider.
· If the unit is operating in a smoky area, ventilate the room or operate the
unit in Fan mode for 3 to 4 hours. There are no components in the unit that
produce a strong odor.
· Check if the drain lines are clean. Clean them regularly.
· If the indoor unit indicator blinks, write down the error code. Contact your
service provider and provide them with the error code.
· It is normal for the unit to generate some noise while operating. If the
pipe length between the units is less than 3 m and no coil was used (see
“Typical installation” in the Installation manual), additional noise may be
transmitted from the outdoor unit to the indoor unit via the piping.
Appendix
36 English
Problem Water drips from the pipe connections on the outdoor unit.
Condensation forms on the surface of the indoor unit.
During the operation of the airconditioner, ” ” can be displayed in the indoor
unit.
Solution
· Condensation may develop when the ambient temperature or humidity changes
significantly. This is normal.
· If the humidity is higher in the room in Cool mode, or the difference
between the desired temperature and indoor temperature is great, condensation
may form on the surface of the indoor unit.
· This situation occurs when the in-house input voltage is excessively high or
low. (If it is out of AC 290V ~ 120V range, it may occur.) During the ” ”
indicated, the outdoor unit is not operated and also the cooling operation is
interrupted. When the indoor voltage enters the outdoor unit operation range
again, the ” ” mark is turned off, and the outdoor unit is operated after 3
minutes. If ” ” occurs frequently while using the air conditioner, check
whether there is any problem in the power supply system of your house.
Appendix
English 37
SmartThings app
Use the SmartThings app on your smartphone to control the air conditioner via
the wireless Internet.
To remotely control the air conditioner, you need to connect your smartphone
to the air conditioner. If already connected, skip to “Step 6. Controlling the
air conditioner with your smartphone” on page 39.
Step 1. Checking the requirements for connection
Before connecting your smartphone with the air conditioner, make sure that the
following requirements are met:
· Wi-Fi access point: 2.4 GHz Wi-Fi access point only
· The air conditioner and your smartphone must be within the coverage of the
same Wi-Fi access point and connected to it. After the connection, you can
control the air conditioner from any place via various wireless networks such
as Wi-Fi, 3G, LTE and 5G.
· The supporting software version of the SmartThings app is subject to change
according to the OS supporting policy the manufacturer provides. In addition,
as for the SmartThings app or the functions that the app supports, the new
application update policy on the existing OS version can be suspended due to
usability or security reasons.
· The SmartThings app is subject to change without notice to improve usability
or performance. As the mobile phone OS version is updated every year, the
SmartThings is also updated continually according to the latest OS.
· If you have enquiries regarding the items mentioned above, please contact us
on st.service@samsung.com.
Step 2. Connecting your smartphone to the Wi-Fi network
1 Turn on the Wi-Fi access point.
2 Tap Settings Wi-Fi on your smartphone. 3 Tap the Wi-Fi switch to activate
it, and then select
the 2.4 GHz Wi-Fi access point to connect to.
4 If needed, enter the password for the access point.
5 Tap Advanced.
6 Top the Switch to mobile data switch to deactivate it.
Step3. Installing the SmartThings app
If the SmartThings app is not installed on your smartphone, follow the
procedure below. If installed, skip to “Step 4. Configuring the SmartThings
app” on page 38. 1 Launch Play Store or App Store. 2 Tap the search field, and
then search for
“SmartThings”. 3 Tap INSTALL for the found SmartThings app item. 4 Select
Agree.
Step 4. Configuring the SmartThings app
After the SmartThings app is installed, follow the procedure below to
configure it. If already configured, skip to “Step 5. Connecting your
smartphone to the air conditioner” on page 39. 1 Launch the SmartThings app. 2
When you see pop-up windows asking for
location, Wi-Fi, Bluetooth permissions, tap Start. 3 Tap Log In. 4 If you have
no Samsung account, tap Add
account to create your Samsung account. 5 Log in to your Samsung account. 6
Consent to TERMS AND CONDITIONS. 7 When you see a pop-up window asking for
access permission to location information, tap ALLOW.
Appendix
38 English
Step 5. Connecting your smartphone to the air conditioner
1 Plug in the power cord of the air conditioner, and then turn on the power.
2 Launch the SmartThings app. 3 Tap Add device on the home screen of the
SmartThings app. 4 Tap ADD DEVICE MANUALLY. 5 Tap Air conditioner > Room air
conditioner. 6 Press the (Timer) button on the remote
control for at least 4 seconds.
To notify that registration of the selected air conditioner to your Samsung
account is in progress, the (Transmit) indicator blinks for several seconds
and appears on the remote control display. When the connection is finished,
the (Transmit) indicator turns off and disappears. A new device card for the
selected air conditioner is added to the home screen of the SmartThings app.
Step 6. Controlling the air conditioner with your smartphone
1 Launch the SmartThings app. 2 On the home screen of the SmartThings app,
tap the device card for the air conditioner, which was added when you
proceeded with “Step 5. Connecting your smartphone to the air conditioner” on
page 39.
WARNING
· RF exposure warning statement for keeping 20cm distance when installing
this module.
· Warning that this module should not be installed and operating
simultaneously with other radio without additional evaluation or FCC filing.
· Instruction for host system labeling, the host system should have proper
label showing that it “Contains FCC ID : A3LSWL-B70F”
· Your device uses non-harmonised frequency and is intended for use in all
European countries. The WLAN can be operated in the EU without restriction
indoors, but cannot be operated outdoors in France.
Specifications
Wi-Fi
Frequency Range Transmitter Power(Max)
2412 – 2472 MHz
20 dBm
Open Source Announcement
The software included in this product contains open source software. You may
obtain the complete corresponding source code for a period of three years
after the last shipment of this product by sending an email to
mailto:oss.request@samsung.com.
It is also possible to obtain the complete corresponding source code in a
physical medium such as a CD-ROM; a minimal charge will be required.
The following URL http://opensource.samsung.com/ opensource/SMART_AT_051/seq/0
leads to the download page of the source code made available and open source
license information as related to this product. This offer is valid to anyone
in receipt of this information.
Appendix
English 39
Memo
40 English
Appendix
Appendix
English 41
QUESTIONS OR COMMENTS?
COUNTRY
CALL
INDIA
1800 40 7267864 (1800 40 SAMSUNG) 1800 5 7267864 (1800 5 SAMSUNG)
This product is RoHS compliant
OR VISIT US ONLINE AT www.samsung.com/in/support
References
- Samsung Open Source
- Samsung US | Mobile | TV | Home Electronics | Home Appliances | Samsung US
- Product Help & Support | Samsung India
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>