the t bone TG 16 T Tour Guide Instruction Manual

: June 2, 2024
: the t bone

Table of Contents

the t bone TG 16 T Tour Guide
Product Information
Product Usage Instructions
Safety instructions
Features
Connections and controls
Operation
Technical specifications
Documents / Resources

the t bone TG 16 T Tour Guide

the-t-bone-TG-16-T-Tour-Guide-product

Product Information

Specifications

Integrated rechargeable lithium battery
Charging contacts for charging stations TG C2 and TG C18
Built-in microphone with 3.5-mm connection for a separate microphone
Housing color: Black
Comes with matching ear clip microphone, cloth pouch for storage, band, and belt clip
Operating frequency: 863-865MHz

Product Usage Instructions

Safety Instructions

Ensure correct battery polarity to avoid fire risk.
Remove batteries if not in use for an extended period to prevent leakage damage.
Avoid storing lithium-ion batteries incorrectly to prevent damage.
Keep the device away from electromagnetic interference with neighboring receivers.

General Handling

Avoid exerting force while operating the device to prevent damage.
Do not immerse the device in water; clean it with a dry cloth only.
Avoid using liquid cleaners or flammable agents on the device.
Keep the device away from impurities and liquid containers.

Connections and Controls

Volume control with [VOL] button.
LED indicator for operating status and battery charge.
Main power switch with [POWER] button.
Reset the button for factory defaults with the [RESET] button.
3.5-mm jack socket for microphone input with [MIC INPUT] button.
Belt clip and holes for band threading for portability.
Channel selection with [CHANNEL] button.
Built-in microphone with [MIC] option.

Frequently Asked Questions (FAQ)

Q: How do I know if the battery charge is low?

A: The LED indicator will light up red when the charge of the built-in battery is too low.

Q: Can I use any microphone with the device?

A: You can use the supplied ear clip microphone or another compatible microphone with a 3.5-mm jack socket.

Quick start guide

This document contains important information on the safe use of the product. Read and follow the safety instructions and all other instruc-tions. Keep the document for future reference.
If you pass the product on to others, please include this document.
Contents are subject to change. Please refer to the latest version of the documentation, which is available for download at www.thomann.de.

Safety instructions

Intended use

This device is intended to be used for the wireless transmission of audio signals, particularly voice transmission during guided tours and events. Use the device only as described in this user manual.
Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damage resulting from improper use.
This device may be used only by persons with sufficient physical, sensory, and intellectual abilities and the necessary knowledge and experience.
Other persons may use this device only if they are su-pervised or instructed by a person who is responsible for their safety.

Risk of injury and choking hazard for children!

Children can suffocate on packaging material and small parts. Children can injure themselves when handling the device. Never allow children to play with the packaging material and the device.
Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervision.
Keep small parts away from children and make sure that the device does not shed any small parts (such as knobs) that children could play with.

Risk of injury due to incorrect handling of lithium batteries!

In the event of a short circuit, overheating, or mechanical damage, lithium batteries can cause severe injuries. Handle lithium batteries correctly and professionally.
Store lithium batteries in a cool and dry place in their original packaging. Keep lithium batteries away from sources of heat.
Never open lithium batteries. Only charge rechargeable lithium batteries with a suitable charger. Remove the lithium batteries before disposing of the device.
Cover the poles of used lithium batteries with adhesive tape to prevent short circuits. Electrolytes can escape from damaged lithium batteries.
Put the damaged lithium battery in air-tight packaging. Collect the electrolyte with absorbent paper. Wear rubber gloves while doing so.

Damage to the external power supply due to high voltages!

The device is powered by an external power supply. The external power supply can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur.
In the worst case, excess voltages can also cause a risk of injury and fires. Make sure that the voltage specification on the external power supply matches the local power grid before plugging in the power supply.
Only operate the external power supply from professionally installed mains sockets that are protected by a residual current circuit breaker (FI).
As a precaution, disconnect the power supply from the power grid when storms are approaching or if the device will not be used for a longer period.

Damage to the device if operating in unsuitable ambient condi-tions!

The device can be damaged if it is operated in unsuitable ambient conditions.
Only operate the device indoors within the ambient conditions specified in the “Technical specifications”. Avoid operating it in environments with direct sunlight, heavy dirt, and strong vibrations.
Avoid operating it in environments with strong temperature fluctuations. If tem-perature fluctuations cannot be avoided (for example after transport in low outside temperatures), do not switch on the device immediately.
Never subject the device to liquids or moisture. Never move the device to another location while it is in operation.
In environments with increased dirt levels (for example due to dust, smoke, nicotine, or mist): Have the device cleaned by qualified specialists at regular intervals to prevent damage due to overheating and other malfunctions.

Risk of fire due to incorrect polarity!

Incorrectly inserted batteries may cause fires and destroy the device and the batteries. Observe the markings on the batteries and the device. Ensure that proper polarity is observed when inserting batteries.

Possible damage due to leaking batteries!

Batteries can leak and cause permanent damage to the device. Remove the batteries from the device if it is not going to be used for an extended period.

Possible damage to lithium-ion batteries through incorrect storage!

Deep discharge can permanently damage lithium-ion batteries or cause them to lose some of their capacity. Charge the lithium-ion batteries before longer breaks in use and before storage.
Ensure that the device is switched off for storage.
Store the device at room temperature or cooler in an environment as dry as possible.
Recharge the lithium-ion batteries about every three months if they are stored for a longer time to avoid permanent damage due to too deep self-discharge.
Fully charge the lithium-ion batteries at room temperature immediately before use.

Interference with neighboring electrical receivers due to electromagnetic field!

The device emits an electromagnetic field during operation.
Using the device near receiver devices (e.g. radios or TV sets) may cause interference.
If neighboring receivers are disturbed by the operation of the device, increase the distance between the device and the receivers with interference.

General handling

To prevent damage, never exert force while operating the device.
Never immerse the device in water. Wipe only with a clean and dry cloth. Do not use liquid cleaners such as benzene, thinners, or flammable cleaning agents

Keep the device away from impurities!

Keep the device away from containers with liquid. Should liquid enter the device, this could lead to its destruction or fire. Ensure that no metallic parts enter the device.

Features

Displays for set channel and operating status
Integrated rechargeable lithium battery
Charging contacts for charging stations TG C2 and TG C18
Built-in microphone
3.5-mm connection for separate microphone
Housing color: Black
Matching ear clip microphone, cloth pouch for storage, band and belt clip (included)

Connections and controls

the-t-bone-TG-16-T-Tour-Guide-fig-1

[VOL] | Volume control
LED to indicate the operating status. The LED lights up green when the device is turned on. It lights up red when the charge of the built-in battery is too low.
[POWER] | Main switch. Turns the device on and off. Press the switch for about one second to switch the device on, and about three seconds to turn it off.
[RESET] | Reset button for resetting the device to factory defaults
[MIC INPUT] | 3.5-mm jack socket (mono) for connecting the supplied ear clip microphone or another microphone
Belt clip
Holes for threading the band.
Display
[CHANNEL] | Channel selection button. The transmitter and receiver must be set to the same channel.
Indication of the frequency range in which the device operates.
- The indication here must match the information on the transmitter.
Charging contacts
[MIC] | Built-in microphone

Operation

Preparing the device

Thread the supplied band through the corresponding holes on the upper right corner of the housing.
If you do not want to use the built-in microphone, you can connect the supplied ear clip microphone or another suitable microphone to the corresponding socket.
Make sure that the device is fully charged before using it.

Switching on the device

Press [POWER] until the indicator LED lights up green. The device is now operational.

Switching off the device

Press [POWER] until the indicator LED goes out. The device is now switched off.

Selecting a channel

The display on the side of the device indicates the channel that is currently set. To change the setting, press the button underneath the display until the decimal point on the display flashes. Press the button briefly to change to the next channel.
The channel numbers are represented by the characters “0” … “9”, “A” … “F”. If you do not press the button for about six seconds, the device adopts the current settings. The transmitter and receiver must be set to the same channel.

Technical specifications

Functional principle PLL synthesized control
- Input connections Microphone 1 × 3.5 mm jack socket
Frequency range 863 MHz … 865 MHz
- Max. transmission power 10 mW
Input impedance 2.2 kΩ
- Range i n clear field of vision 50 m
NF frequency response 40 Hz … 18 kHz
- Total harmonic distortion ±0.005%
Frequency deviation ± 48 kHz
- Spurious emissions < –50 dBC
Battery Battery type Lithium-ion
- Voltage 3.7 V
Operating time 14 h
- Dimensions (W × H × D) 54 mm × 99 mm × 17 mm
Weight 80 g
- Ambient conditions Temperature range 0 °C…40 °C
Relative humidity 20%…80% (non-condensing)
Discover the entire t.the bone range on our website: tbone.audio
Visit us on Instagram and discover the full audio experience: tbone.audio/instagram
Visit our YouTube channel for product videos and interesting stories: tbone.audio/youtube
Environmentally friendly materials have been chosen for the packaging. These materials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are disposed of properly.
Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling.
Please follow the instructions and markings on the packaging.
Batteries must not be thrown away or burnt, but must instead be disposed of in line with the local regulations on the disposal of hazardous waste. Use the available collection points to do so.
Only dispose of lithium batteries when they are empty. Remove lithium batteries from the device before disposal if this is possible without destroying it.
Protect used lithium batteries against short circuits, for example by taping the poles.
Dispose of the built-in lithium batteries together with the device. Check for an appropriate collection facility.
Dispose of the batteries and rechargeable batteries at the appropriate collection points or through your local waste facility.
This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended.
Do not dispose of your old device with your normal household waste; instead, deliver it for controlled disposal by an approved waste disposal firm or through your local waste facility.
When disposing of the device, comply with the rules and regulations that apply in your country.
If in doubt, consult your local waste management facility.
Proper disposal protects the environment as well as the health of your fellow human beings.
Also, note that waste avoidance is a valuable contribution to environmental protection.
Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal.
You can return your old device to Thomann GmbH at no charge.
Check the current conditions on www.thomann.de.
If your old device contains personal data, delete that data before disposing of it.
Observe the disposal note regarding documentation in France.
Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany ·www.thomann.de
DocID: 234705_15.03.2024