dreambaby L6030 Grab ‘N Go Travel Booster Seat with Built In Storage Space Instructions

dreambaby L6030 Grab ‘N Go Travel Booster Seat with Built In Storage

Space

Product Specifications

• Adult Chair Backrest Height: 18.5in / 47cm
• Adult Chair Seat Depth: 12in / 30.5cm
• Adult Chair Seat Width: 13.25in / 34cm

Product Usage Instructions

Installation Instructions:

1. Place the booster seat on a suitable adult chair.
2. Position the Seat Strap (D) under the chair and click the buckle into place. Tighten the strap.
3. Position the Backrest Strap (C) around the back of the chair and click the buckle into place. Tighten the strap.
4. Release the Waist Strap Buckles (B).
5. Place the child onto the seat and click the buckles into place. Tighten and adjust the Waist Strap (A) to fit snugly.

Maintenance Instructions:

To wash: Unzip the storage area, remove the insert, hand wash in warm water, line dry. Do not bleach, iron, dry clean, or machine wash.

Regularly check all straps and buckles. Discontinue use if any parts are missing, damaged, or broken.

FAQ – Frequently Asked Questions

Q: Can I use this booster seat without an adult chair?
A: No, the booster seat must be placed on a suitable adult chair before use.

Q: What should I do if any parts of the booster seat are damaged?
A: Discontinue use immediately if any parts are missing, damaged, or broken and contact customer service for assistance.

INSTRUCTIONS

Grab ‘N Go
Booster Seat
Complies with ASTM F 2640
Standard Consumer Safety Specification

IMPORTANT! KEEP FOR FUTURE REFERENCE

READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY.
If you sell or giveaway this product, make sure you give these instructions to the new owner.

WARNING

Children have suffered head injuries, including skull fractures, after falling with or from booster seats.

• Check that booster seat is securely attached to adult chair before each use, with both the seat and back attachment straps provided.
• Always use restraints until child is able to get in and out of booster seat without help. Adjust to fit snugly.
• Never allow child to push away from table.
• Never lift and carry child in booster seat.
• Stay near and watch your child during use.
• Never use this product on a stool or bench that does not have a seat back.
• Prevent serious injury or death. Do not use in motor vehicles.
• Use this product only for children capable of sitting upright unassisted (typically 6 months of age).
• Discontinue use if any parts are missing, damaged or broken.
• This product is not a substitute for adult supervision. Never leave a child unattended.

DIMENSION

The Booster should only be attached to an adult chair that has the below dimensions as a MINIMUM.

PARTS LIST

• A. Waist Strap
• B. Waist Strap Buckles
• C. Backrest Strap
• D. Seat Strap
• E. Storage Area
• F. Pocket

TO INSTALL

1. Open and unfold booster chair.

2. Place on suitable adult chair.

3. Position Seat Strap (D) under chair.
   “Click” buckle into place. Tighten strap.

4. Position Backrest Strap (C) around back of chair. “Click” buckle into place.Tighten strap.

5. Release Waist Strap Buckles (B).

6. Place child onto seat and “click buckles into place.Tighten and adjust Waist Strap (A) to fit snugly.

MAINTENANCE

To wash:
Unzip storage area and remove insert. Hand Wash in warm water. Line Dry. Do not bleach.
Do not iron. Do not dry clean. Do not machine wash.

Regularly check all straps and buckles.
Discontinue use if any parts are missing, damaged or broken.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>