dreambaby L907 Dual Fit Plug and Electrical Outlet Covers Instruction Manual

: June 14, 2024
: dreambaby

Table of Contents

L907 Dual Fit Plug and Electrical Outlet Covers
To Install:
To Use:
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Dual-Fit
Plug & Electrical Outlet Covers
L907
Patent Pending

L907 Dual Fit Plug and Electrical Outlet Covers

Important: Read all instructions carefully before installing this product.
Please keep instructions for future reference.

WARNING:
Electrical hazard! Turn power off!

Dreambaby® Plug and Electrical Outlet Covers help prevent children from placing objects into electrical outlets.
Secures appliances into outlets.
Socket and plug are inaccessible.

To Install:

CAUTION: Prior to installation, switch off power to electrical outlet.

Separate the Base Plate from Cover by simultaneouslpushing in Locking Tabs on both sides of cover (A) and lifting off the cover.
Remove screw(s) from electrical outlet cover plate (B1 + B2). DO NOT REMOVE cover plate.
Position the Base Plate over the (décora or standard outlet) cover plate (C1 + C2). For Standard outlets, position the Adaptor Plate over Base Plate on electrical outlet (C1).
Screw Adaptor Plate and/or Base Plate in to place using supplied screws (D1 + D2).
Do not over tighten.
Align slots on Cover with Locking Tabs on Base Plate.
Rotate Cover down over both Locking Tabs ‘snap’ into place, securing Cover (F

G).

After installation, switch power back on.

To Use:

To open Cover, repeat step 1 of “installation” (A).
Insert electrical plug into socket (E1 + E2).
Tuck electrical cord at bottom of Base Plate.
To close, repeat step 5 of “installation”. Ensure that electrical cord is extending from bottom of Cover and clip into place (F).

Caution: There is no substitute for proper adult supervision. This product is only a deterrent. Discontinue use when child is able to open it.

TEE-ZED PRODUCTS, LLC ACCEPTS NO RESPONSIBILTY FOR ANY LOSS OR DAMAGE SUFFERED BY ANY PERSON AS A RESULT OF THE USE OR MISUSE OF THESE GOODS. IN THE CASE OF ANY DEFECT IN THE GOODS, TEE-ZED’S LIABILITY SHALL BE LIMITED SOLELY TO REPLACEMENT OF THE DEFECTIVE GOODS.

Dreambaby® products by
Los productos Dreambaby® por
Tee-Zed Products Pty Ltd
PO Box 2022,
Bondi Junction NSW 1355
Australia
+61 (0)2 9386 4000
[email protected]
www.dreambaby.com.au

Tee-Zed Products, LLC
PO Box 1662,
Jamestown, NC 27282
USA
336-454-5716,
Toll free: 1-888-271-6959
[email protected]
www.dream-baby.com

Made in Zhejiang, China.
©2019 Tee-Zed Products, LLC