dreambaby F820NN Retractable Gate Instructions

: June 13, 2024
: dreambaby

Table of Contents

dreambaby F820NN Retractable Gate
Product Information
Product Usage Instructions
IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY
PARTS LISINSTALLATIONT
INSTALLATION
To mount gate
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

dreambaby F820NN Retractable Gate

Product Information

The Retractable Gate is a safety barrier designed for domestic use with children up to 24 months of age. It conforms to EN1930:2011 safety standards and has a manual close system. The gate is available in three colors: F820NN (white), F943NN (black), and F1012 (grey). It is designed to be fixed to structurally sound surfaces and should not be used as a pool or pond barrier. The gate should never be used with a child who can climb over or open the gate.

Included Items

A Gate Panel
B Cover
C Upper Bracket (x2)
D Lower Bracket (x2)
E Hook (x2)
F Hook (x2)
G Locking Rod
H Screws 4x25mm (5/32 x1in) (x16)
I Masonry/Brick Plugs (x16)
J Templates (x5)

Optional Accessories

Spacer Sets-A1/A2 (sold separately) – see Accessories Panel*

Product Usage Instructions

Read the entire instructions before assembling and installing the Retractable Gate.
Ensure that the surfaces the gate will be fixed to are suitable and structurally sound.
If using the gate at the bottom of stairs, place it at the front of the lowest stair. If using it at the top of stairs, do not place it on any stair below the level of the top stair.
The clearance space between the base of the casing and the floor must not exceed 15cm (6in).
For installation, refer to the provided templates and follow the mounting instructions.
Use the included screws and masonry/brick plugs to secure the gate.
If necessary, use optional spacer sets (sold separately) to adjust the gate’s width.
Ensure that the gate is securely locked in place before use.
Never leave a child unattended and remember that this gate does not replace proper adult supervision.

For any further assistance or inquiries, please refer to the product manual or contact our customer support.

IMPORTANT! READ AND FOLLOW THESE INSTRUCTIONS CAREFULLY

AND KEEP FOR FUTURE REFERENCE

Read the entire instructions before assembling and installing this product.
If you sell or give away this product, make sure you give this instruction to the new owner.

WARNING

WARNING– Incorrect installation can be dangerous.
WARNING– Do not use the safety barrier if any components are damaged or missing.
WARNING– The safety barrier must not be fitted across windows.
WARNING– Never use this gate without securely installed Locking Brackets and Locking Hooks.

This safety barrier conforms to EN1930:2011;
This safety gate is for domestic use only; This safety gate has been designed for use with children up to 24 months of age; Never use with a child able to climb over or dislodge/open the gate;
The surfaces that the gate is to be fixed to must be suitable for the purpose and must be structurally sound;

WARNING: This package contains small parts and sharp points in an unassembled state. Keep out of reach of children. Adult assembly required.

The clearance space between the Base of Casing and the floor MUST NOT exceed 0.3cm (0.12in);
If the safety gate is used at the bottom of stairs to prevent the child climbing up the stairs, it must be placed at the front of the lowest stair;
If the safety gate is used at the top of the stairs to prevent child falling down the stairs, it must not be placed on any stair below the level of the top stair;
The clearance space between the Base of Casing and the floor MUST NOT exceed 0.3cm (0.12in);
If the safety gate is used at the bottom of stairs to prevent the child climbing up the stairs, it must be placed at the front of the lowest stair;
If the safety gate is used at the top of the stairs to prevent child falling down the stairs, it must not be placed on any stair below the level of the top stair;

PARTS LISINSTALLATIONT

Before you start

A Gate Panel
B Cover
C Upper Bracket (x2)
D Lower Bracket (x2)
E Hook (x2) Includes 2 sets of mounting brackets for convenient ‘clip-on/clip-off’ relocation
F Hook (x2)
G Locking Rod
H Screws 4x25mm (5/32 x1in) (x16)
I Masonry/Brick Plugs (x16)
J Templates (x5)
K Base of Casing
L Top of Casing
M Release Button

Optional Accessories (sold separately)

F821NN Spacer Sets (white)
F944NN Spacer Sets (black)
For use when gate is fitted to
Skirting boards / Baseboards
F895 Gate Adaptor Panel
To provide a flat surface to install gate.

INSTALLATION

Choose best location for gate
Ensure the surface you are mount the gate is structurally sound such as solid timber, brick or masonry. For plaster/gyprock surface, locate the timber beam or stud behind and mount in this location (mounting on plaster/gyprock alone is not strong enough and not safe). Do not mount to glass.

Gate can be installed outside or inside door openings
Opening direction of the gate can be changed to suit
Consider which side is more convenient for handle position.

Bottom of stairs

1d. If the gate is used at the bottom of the stairs to prevent the child from climbing up the stairs, it must be placed on the lowest stair.

Top of stairs

If the gate is to be used at the top of the stairs to prevent the child from falling down the stairs, it must not be placed on any stair below the level of the top stair.
At the top of landing, position the gate 15cm (6in) away from the top step.

Top view of gate

Side view of gate

1f. Make sure that the gate is mounted firmly and evenly in vertical position.

Accessories (sold separately)

1g. Skirting boards (baseboards)
If there is a skirting board (baseboard) to which the Retractable Gate is to be attached, build up the wall areas equivalent to thickness of baseboard (skirting board) with Spacers F821NN/F944NN (sold separately).

Mounted INSIDE opening – with spacer

Mounted OUTSIDE opening – with spacer
Note: Hook Spacer to be mounted horizontally when mounting gate outside door opening

1h. Adaptor Panel
To provide a flat surface to install gate.

To purchase accessories, contact Tee-Zed Products for your nearest retail outlet: info@tee-zed.com.au

Select the Templates to use to suit your chosen gate position.

Use Bracket Template 1 and Hook Template -2
Use Hook Template 3 and Bracket Template -1
Use Bracket Template 1 and Hook Template -4
Use Hook Template 5 and Bracket Template -1

Locate the frame/stud and overlay
Hook and Bracket Templates.

Keep the Templates vertical and ensure lower edge is directly on the floor.
Mark hole positions with a pencil.

Screw in Brackets and Hooks (C,D,E,F) into wall or door frame using screws (H) and if masonry or brick using Plugs (I).

To mount gate

Checked the direction you want the gate to open / close.
Align the notch on Top of Casing (L) with the arrow on the Upper Bracket (C) in desired open / close direction.
Align the lower part of gate to Lower Bracket (D) and top of gate to Upper Bracket (C). Push down gently to click into place.
Slide Cover (B) over Upper Bracket (C) until it covers dismount Latch.
The Cover locks the gate in place. It must be securely installed at all times.

TO USETo close the gate
Press Release Button and twist clock-wise, then pull the gate handle and without stopping fit Locking Rod (G) into lower and upper Hooks (E, F).

To open gate
Press Release Button and twist clock-wise then pull the gate handle out from lower and upper Hooks (E, F).

NOTE: The noise you hear while the gate retracts is designed to alert you, letting you know that the gate is being opened.

For silent operation, hold Release B on down when retracting gate.

TO REMOVE

Slide Cover (B) from Top of Casing (L).
Press dismount Latch on Upper Bracket (C) and slide gate up.

MAINTENANCE & CARE

Gate must be fitted according to instructions, to ensure it works correctly.
Regularly check gate to ensure it is fitted properly and securely. Adjust as required.
Regularly check that brackets and hooks are securely in place.
If gate is used outdoors, bring inside and keep out of rain, hail, snow or below freezing
Do not use the safety gate if any components are damaged or missing.
To clean, wipe surface with a damp cloth or sponge using mild detergent and warm water. Never clean with abrasive, ammonia based bleach based or spirit type cleaners.
Any additional and replacement parts should be obtained from Tee-Zed Products.

Composition

The plastic parts are made of fiberglass-armed polyamide, Polypropylene and Polyester.
Plastic parts : Nylon & Polyoxymethylene (POM) materials.
Mesh fabric made of 40% polyester and 60% non-toxic PVC coating.
Other components are made of steel and aluminium. The materials are used for their durability and resistance.
Spacers made of ABS (Acrylonitrile Butadiene Styrene).

CONTACT DETAILS

Tee-Zed acknowledges that its customers may be entitled to statutory consumer guarantees and does not seek to exclude or limit them. These guarantees include that Tee-Zed’s products are of acceptable quality. This
Tee-Zed product is for the specific purpose detailed in the instructions and packaging and Tee-Zed considers use outside of that purpose to be abnormal use. To the maximum extent permitted by law, Tee-Zed does not accept

any liability for damage

arising from abnormal use of the products;
caused by installation or removal of the products other than in accordance with the supplied installation and removal instructions; or
arising under the law of tort or contract.

Dreambaby® products by
Made in Shenzhen, China.
©2016 Tee-Zed Products Pty Ltd

Tee-Zed Products Pty Ltd
PO Box 2022, Bondi Junction NSW 1355 Australia