TrainTail Smart Dog Bark Control Collar User Manual
- June 2, 2024
- TrainTail
Table of Contents
TrainTail Smart Dog Bark Control Collar
IMPORTANT SAFETY INFORMATION
-
NOT for aggressive dogs!
-
For dogs over 6 months
-
Keep out reach of Children! For DOG use only!
-
DO NOT leave the Bark Collar on dog for more than 12 hours per day
-
DO NOT attach an extra leash to the Bark Collar!
-
DO NOT leave the Bark Collar on the dog for more than 12 hours per day.
-
When possible, reposition the Bark Collar on the dog’s neck every 1 to 2 hours.
-
Check the fit of the nylon collar to prevent excessive pressure. More information on achieving the perfect fit for your dog’s nylon collar can be found in this manual.
-
Never attach a leash to the Bark Collar, as it may cause excessive pressure on the contact points.
-
Clean the dog’s neck area and the Prongs of the Bark Collar weekly using a damp cloth.\
PRODUCT INFORMATION
-
Bark Collar
-
Charging Cable
-
User Manual
SET OF COLORED DOTS
Apply the colored dot to the center of the front panel in the designated area.
This allows you to easily differentiate between collars (to maintain
individual settings for each dog) if you have more than one dog.
SET UP THE BARK COLLAR
-
Charge the Bark Collar before Use
The product can be charged via PC, Power Bank or Charger with an output voltage of 5V for 2-3 hours.
Power Indicator:
Flashing green slowly: the Bark Collar is charging.
Solid green: the Bark Collar is fully charged.
Flashing green rapidly: the Bark Collar battery is low.
Flashing red rapidly with a constant warning tone: the Bark Collar is charging incorrectly.
Note: -
The Bark Collar ONLY supports a 5V-rated power source.
-
Use the charging cable included in the package when charging. Other charging cables may not be suitable for this Bark Collar, which could cause electric damage.
-
The charger, power bank, and other charging devices shown in the above picture are not included in the box.
-
Turn on / off the Bark Collar
Press and hold the Power / Sensitivity Button to:
Power on: Press for 2 seconds, accompanied by a vibration.
Power off: Press for 3 seconds, accompanied by a beeping tone. -
Mode Setting
Press the Mode Button to switch between modes.
Vibration Mode
Vibration+Beeping Mode -
Sensitivity Level Setting:
Press the Power/Sensitivity Button to adjust the sensitivity level.
| Low Level
---|---
| Medium Level
| High Level
5. Test the Function of the Bark Collar:
Set the Bark Collar to either mode and then adjust the sensitivity level to
the highest setting. After that, imitate a dog barking towards the Sensor Mic
located at the back of the Bark Collar.
Let’s take an example: if you set the Bark Collar to Vibration + Beeping
Mode, it will vibrate and emita beeping tone when it detects the dog barking.
This indicates that the Bark Collar is effective in deterring unwanted
barking.
FITTING THE BARK COLLAR
Note: Please pay special attention if you have a small dog!
Ensure that the Bark Collar fits securely against your dog’s neck, while still
allowing enough space for a finger to fit between the strap and the neck. For
optimal performance, make sure the collar is centered on the dog’s throat.
TRIM THE COLLAR AS FOLLOWS:
a) Use a pen to mark the desired length of the collar. Take into account
potential growth if your pet is young or has a thick winter coat.
b) Remove the collar from your pet and cut off any excess material.
c) Before putting the collar back on your pet, seal the cut edge by
briefly applying a flame along the trimmed edge.
Great! You have successfully fitted the Bark Collar on your dog, and it is now
ready for training!
HOW IT WORKS
-
Vibration Mode
-
) Vibration + Beeping Mode
Icon Description:
Vibration (increases automatically in intensity with each step).
Beeping Tone (remains unchanged).
NOTES:
- If your dog continues barking for more than 1 minute, the Bark Collar will advance to the next step.
- If the collar is not activated within 1 minute, it will automatically return to Step 1.
FREQUENTLY ASKED QUESTIONS AND ANSWERS
Q: Why does the Bark Collar not work when the dog barks?
A: Please first ensure that the Bark Collar fits securely, but with
enough looseness for one finger to fit between the strap and the dog’s neck.
Some dogs may bark weakly, in which case you need to increase the sensitivity
level. There is also a slight possibility that a thick coat around the neck
area can reduce the detection of barking. Please trim the hair close to the
area where the Bark Collar is placed.
Q: Why is the Bark Collar sometimes triggered in a noisy environment even
when the dog is not barking?
A: Although we have optimized the barking detection, certain
environmental noises may have a similar frequency to barking, which can
occasionally activate the Bark Collar. If such situations occur multiple
times, please lower the sensitivity level.
Q: Can I use the Bark Collar when other dogs are playing around?
A: Dogs tend to bark when they play and get excited. For the comfort and
safety of your dog, we do not recommend using the Bark Collar in such an
environment.
Q: How do I know if I can use this Bark Collar for my dog?
A: The Bark Collar is designed for healthy dogs over 6 months old. It is
important to note that this Bark Collar should not be used on unhealthy or
aggressive dogs. If you are uncertain whether this Bark Collar is suitable for
your dog, please consult your veterinarian or a certified trainer.
Q: Can I charge this Bark Collar with any type of charger?
A: No, it is recommended that you use a charger with an output voltage of
5V to charge this Bark Collar, as using a charger with an output voltage
higher than 5V may damage the Bark Collar. If the input voltage is too high,
the Bark Collar will automatically stop charging and emit a warning tone.
Q: Will my dog stop barking completely?
A: The Bark Collar is designed to effectively and humanely reduce
excessive barking, and it is recommended to use the Bark Collar when you want
to discourage your dog from barking excessively.
Q: Is this Bark Collar safe and humane?
A: Yes, this Bark Collar is designed to get your dog’s attention without
causing harm. However, the initial vibration or beeping tone may startle your
dog.
For any questions about the collar or dog training, we’re here to help.
Contact us at support@traintail.us.
Our professional team is committed to your success.
TrainTail.us
support@traintail.us
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>