Evolve SLS Rear Seat Entertainment System User Manual
- June 2, 2024
- EVOLVE
Table of Contents
SLS Rear Seat Entertainment System
“`html
Product Specifications
- Product Name: Evolve SLS Rear Seat Entertainment System
- Model: SLS-1000
- Screen Size: 10 inches
- Power Source: Vehicle’s ignition key
- Connectivity: Bluetooth, Internet
Product Usage Instructions
System Set-Up
To set up the Evolve SLS Rear Seat Entertainment System:
Power Up
1. Turn the vehicle’s ignition key to the ‘run’ position.
2. The system will automatically start to power up.
3. The screen will go to sleep after 30 seconds of non-use.
4. Press the ‘power’ button on a paired remote control or use
the on-screen power button to put the screen to sleep.
Initial Setup
1. Select Language:
a) Choose your preferred language from the list and press
Next.
2. Pair Remote Control:
a) Press and hold Vol- and Vol+ buttons simultaneously for 3
seconds until the red LED light on the remote starts blinking.
b) Wait for the system to pair with the remote.
c) Once connected, press Next.
3. Monitor Pairing:
a) The system will search for and pair with the second
monitor.
b) Once found, it will start connecting.
c) When connected, press Next.
4. Internet Connection:
a) Select a network and enter the password to connect to the
internet.
b) Press Next to continue.
5. Bluetooth Audio Pairing:
a) Connect a Bluetooth audio device to listen to audio from the
display.
b) Select the device from the list and press Next.
6. Tutorial:
a) The tutorial will guide you through system functionality and
navigation.
b) Press Next to begin or Skip to ignore.
Frequently Asked Questions (FAQ)
Q: How do I pair a Bluetooth audio device?
A: To pair a Bluetooth audio device, put the device in pairing
mode and select it from the list on the screen. Press Next to
complete the pairing process.
Q: How can I access the tutorial later?
A: You can access the tutorial from Settings under More Settings
Tutorial. All steps are also explained in the Owner’s Manual
starting from page 22.
“`
Evolve SLS Rear Seat
Entertainment System
Owner’s manual
1
EVOLVE SLS REAR SEAT ENTERTAINMENT SYSTEM
SYSTEM SET-UP ……………………………………………………………………….. 5 POWER
UP………………………………………………………………………. 5 INITIAL SETUP …………………………………………………………………. 5
WATCHING CONTENT ……………………………………………………………….. 10 Log In to Screenhits
TV……………………………………………………… 10 Important Notice ………………………………………………………………. 11
Safety Precaution …………………………………………………………….. 11 Product Features
……………………………………………………………… 11 Warnings ………………………………………………………………………… 11
Caution…………………………………………………………………………… 11 Bluetooth Headphones
……………………………………………………… 13 How Pair and Use the Bluetooth Headphones………………………..
13 Installing or Replacing the Battery ……………………………………….. 14
Remote Control Operation (continued) ………………………………………………. 15 General Operating
Instructions …………………………………………………………. 16
Turning the monitor ON or OFF…………………………………………… 16 Navigation Bar
…………………………………………………………………. 16 Settings ………………………………………………………………………….. 19
Language ……………………………………………………………………….. 19 Monitor Pairing
………………………………………………………………… 20 Volume…………………………………………………………………………… 20 Brightness
………………………………………………………………………. 20 Wi-Fi Internet Connection
………………………………………………….. 21 Bluetooth ………………………………………………………………………… 22 Software
…………………………………………………………………………. 22 Tutorial …………………………………………………………………………… 22 APP
Download ………………………………………………………………… 23 Read Back………………………………………………………………………. 23
User Manual ……………………………………………………………………. 23
Restart……………………………………………………………………………. 23 Factory Reset
………………………………………………………………….. 23 Streaming ……………………………………………………………………….. 24
Gaming…………………………………………………………………………… 25 Live TV ……………………………………………………………………………
25 Profiles …………………………………………………………………………… 25 Parental Controls
……………………………………………………………… 25 Streaming Search…………………………………………………………….. 26
Services …………………………………………………………………………. 26 HDMI ………………………………………………………………………………
29 Compliance Information ………………………………………………………………… 30
FCC Warning: …………………………………………………………….. 30 ITE Notice:
…………………………………………………………………. 30
© 2023 Voxx International Corporation. All rights reserved. This manual, or
any portion thereof, may not be reproduced without the express written
permission of Voxx International Corporation. Design and specifications are
subject to change without notice.
2
SYSTEM SET-UP
POWER UP
Turn vehicle’s ignition key to the run’ position, the EVOLVE SLS Rear Seat Entertainment (RSE) system will automatically start to power up. Note: Once the screen has powered up, it will automatically go to sleep after 30 seconds of non-use. The screen can be put tosleep’ by pressing the `power’ button on
a paired remote control, or by using the on-screen power button (see page).
INITIAL SETUP
Upon initial power-up of your RSE system, the following steps will be
performed on both monitors before the system can be fully used. The RSE system
will walk you through this process step by step.
- Select a Language a) Welcome! select your preferred language from the list. Then press the Next button to continue the setup of your RSE system.
- Pair a Remote Control a) Follow screen information press and hold the Vol-
and Vol+ buttons simultaneously for 3 seconds until the red LED light on the
top of the remote starts blinking. b) The RSE is now searching for the remote
signal.
c) Once the remote is paired the screen will confirm that it is connected. Continue by selecting the Next button.
3
INITIAL SETUP- Cont.
3) Monitor Pairing a) The RSE system will automatically start searching for
and pairing with the second RSE Monitor.
b) Once the second RSE Monitor is found, it will start connecting.
c) Once connected, setup is complete. This allows both monitors to view the
same source. Continue by selecting the Next button.
4
INITIAL SETUP – Cont.
4) Internet Connection a) An Internet connection is required for some features
of the RSE system to work. Select a network that appears on the screen that
works best for you.
b) Once selected, you will be asked to enter the connection password. use the
keyboard to enter the password.
c) The RSE system will connect to the Internet. Selecting the connection, you
can also view the status or disconnect from that connection. Select the Next
button to continue.
5
INITIAL SETUP – Cont.
4) Bluetooth Audio Pairing a) Connect a Bluetooth audio device (like
headphones and/or the vehicle radio) to listen to the audio from this display
through the device. Put your Bluetooth device in pairing mode and select it
from the list. b) Once the device is selected, paired and connected select the
Next button to proceed.
4) Tutorial a) This tutorial will walk you through the functionality and
Navigation of the system. Press Next button to begin the Tutorial or press
Skip to ignore the step. The Tutorial can be accessed later from Settings
under “More Settings>Tutorial”. All steps will also be explained in the
Owner’s Manual starting page 22.
6
INITIAL SETUP – Cont.
5) App Download a) To watch videos from Netflix and Prime Video, both Apps
must be downloaded and installed. Select “Download Apps” to continue
downloading and installing both apps or “Skip” to ignore this step. NOTE: You
will be unable to play videos from Netflix and Prime Video until the apps are
downloaded and installed.
6
WATCHING CONTENT
Log In to Screenhits TV
Welcome to Screenhits TV. Find all your streaming in one place. ScreenHits TV
brings together all your favorite streamers into a unique TV Guide, making
finding something to watch easier with exclusive features. Enjoy a free 3-year
subscription. NOTE: You must be connected to Wi-Fi with an active Internet
connection to stream content.
- Scan QR code a) Scan QR code with a phone or tablet. Select the Register
button and enter information needed. once complete return to RSE Monitor.
b) Log into Screenhits TV with your new credentials.
c) Discover and enjoy all that Screenhits TV has to offer.
7
Welcome to EVOLVE SLS Rear Seat Entertainment
Thank you for purchasing the Rear Seat
Product Features:
Entertainment System with Screenhits TV. Before operating the system, read this
Evolve SLS
manual thoroughly and retain it for future reference. The Manual is always available by scanning the code on page 20.
· 10-inch Color Touch Screen Panel (1024×600) with 16:9 aspect ratio
· 16GB on board Memory
· USB Type C, and HDMI Ports
· 3.5mm Stereo Headphone Output
Important Notice
· Android Operating System · Bluetooth Remote Control
It is unlawful in most jurisdictions for a person to drive a motor vehicle which is equipped with a television viewer or screen that is in the motor vehicle at any point forward of the back of the driver’s seat, or that is visible, directly or indirectly, to the
· Bluetooth Wireless Headphones · Wi-Fi Connectivity · Monitor screen
duplication · Media Streaming · Over The Air (OTA) System
updates
driver while operating the vehicle.
The monitors should never be installed
where they will be visible directly, or indirectly, by the operator of the motor
Warnings
vehicle.
· Do not use any harsh solvents or
chemicals when cleaning the unit.
· Do not use any abrasive cleaners
Safety Precaution
that may scratch the screen. Use only a lightly dampened lint free
For safety reasons, do not allow children to unfasten safety belts to make any
cloth to wipe the screen if it is dirty. · Do not put pressure on the screen.
adjustments to the system. System
adjustments can be accomplished using the remote-control unit, while safety belts
Caution
remain fastened. Enjoy your entertainment system but remember that the safety of all passengers remains the number one priority. Direct eye contact from protruding HDMI cables and or USB memory sticks may result in injury during an accident. To prevent eye injury, disconnect all HDMI cables and USB memory sticks when not in use.
Be sure to run the vehicle engine while using the system. Using this system without running the engine can result in battery drain. To avoid the risk of battery drain, please remember to turn off the system when the vehicle is not in use. Do not touch the inner pins of the jacks on the front panel. Electrostatic discharge may cause permanent damage to the system.
8
Front Panel – EVOLVE SLS
1
2
3
4
- 10-inch Touch Screen Panel.
- USB Type C Port. You can play music, images, and videos stored on most USB devices.
- Headphone Output Jack. Connect wired headphones using a 3.5 mm stereo connector.
- HDMI Port. Connect an external audio/video source using a MHL or HDMI connector.
9
Accessories
Bluetooth Headphones
Each monitor includes a built in Bluetooth transmitter for the use with
Bluetooth Headphones and other devices. Each Headphone must be paired with a
separate monitor.
How Pair and Use the Bluetooth Headphones
-
Once initial set-up of the monitor is complete, using a remote or on-screen touch select the settings button.
-
Select the “Connectivity settings”. 3) Select “Bluetooth settings”. 4) On your Bluetooth headphones, press and hold the power button for 3
seconds. Indicator LED will flash Blue, it is now in pairing mode. (Blue Flashing LED) 5) The Monitor will discover either VOXXBT18 or VOXXBT19. Select the Headphone VOXXBT that is present. 6) Your Headphone is now paired and ready to use. You can now pair the other headphones to the other monitor. Other features of your Bluetooth Headphones: Rechargeable battery with Micro USB/USB C charging cable. Headphones cannot be used while charging. Use 3.5 wired cable for direct connection to monitor if batteries die. -
Volume up+ 2) Power 3) Volume Down-
-
Indicator LED 5) Micro USB Charging, DC IN Port 6) 3.5 Stereo Line IN Port
1
2 3
4 5 6
Wired Headphones (not supplied)
This RSE System will allow you to use your personal headphones to listen to
audio content. There are 3.5mm stereo headphone output jacks located below the
front panel of each monitor which can be used with most standard stereo
headphones. Bluetooth and Wired headphones cannot be used at the same time on
the same monitor.
10
Remote Control Operation
Installing or Replacing the Battery
- On the rear of the remote, slide the cover down.
- Remove cover, once cover is removed remove old batteries if needed.
- Install two “triple AAA” batteries as shown. Make sure that proper polarity
(+ or -) is observed. replace the cover back on and slide upward.
NOTE: This remote control is only designed to operate this device. It is not a universal remote control and will not operate any other device.
Warning/Caution on using batteries.
· Always ensure that the battery is inserted with the positive and negative terminals in the correct direction as shown in the battery compartment.
· If the remote control fails to function, replace the battery before seeking repairs at the dealer.
· Keep batteries out of the reach of children. Should the battery be swallowed, immediately consult a doctor. When disposing of used batteries, please comply with governmental regulations or environmental public institution rules that apply in your country/area.
· Remove the battery if the remote control is not used for a month or longer to avoid corrosion and damage to the remote control.
11
Remote Control Operation (continued)
1
2
3 4
5
6
7
9
8
10
11
12
13
14
15
1. Mute – Press to Mute volume. 2. Power – Press to power the monitor ON or
switch to OFF/Standby mode. 3. Indicator LED Light – flashes during Pairing.
4. Play/Pause – Play or Pause video and music playback (for supported
content). 5. Home – Return to Home screen. 6. Input Toggle- choose streaming,
HDMI, or USB inputs. 7. Directional Navigation Up – Press directional keypad
to scroll up. 8. Directional Navigation Left – Press directional keypad to
scroll left. Press and Hold for
Fast Rewind. 9. Select – Press to select the item or option currently
highlighted on-screen. 10. Directional Navigation Right – Press directional
keypad to scroll right. Press and Hold
for Fast Forward 11. Directional Navigation Down – Press directional keypad to
scroll down. 12. Back – Return to the previous screen or action. 13. Menu –
Open more options, based on the item or function currently selected on-screen.
14. Volume (-) – Adjust your monitor volume lower. 15. Volume (+) – Adjust
your monitor volume higher.
12
General Operating Instructions
Turning the monitor ON or OFF
When the vehicle is turned to ON or to ACC the monitors will automatically
boot-up to Screenhits TV profile page (after initial setup). The POWER button
on the remote or the onscreen Navigation Bar when pressed will put the monitor
into Sleep/Stand-by mode. Once the POWER button is pressed again or tap the
screen, the screen will wake up in Profile mode. Once the monitor has been
turned on and is displaying a picture, you can optimize the picture quality by
pivoting the screen forward or backward to adjust the viewing angle.
NOTE: It is recommended to put the monitor into Sleep/Stand-by mode when not in use.
Navigation Bar
Anytime the screen is touched or the Input button from the remote a drop-down
Navigation Bar will appear. The Navigation bar allows the user to access
Power/Standby, Back, Home, Streaming/HDMI/USB, Monitor 1/2, and Settings.
Power
The Power button can always be found in the top left corner of the Navigation
Bar. Pressing the power button will turn off this display. The display can be
turned on again by tapping the screen or using the button on the remote.
Back
The Back button can a be found next to the Power button. Pressing the back button will return to the previous screen. There is also a back button on the remote labeled .
Home
The Home button can a be found next to the back button. Pressing the home
button will return to the Home page Screenhits TV. There is also a back button
on the remote labeled .
13
General Operating Instructions – Navigation Bar
Source Selector The Source Selector is located at the center of the Navigation
Bar. This allows for switching between streaming, HDMI, and USB sources. To
change the source, tap the source selector and select a source from the list.
Using the remote, press the button multiple times to toggle through the
available sources.
Duplicate The Duplicate button is on the right side of the Navigation Bar.
Duplicate mirrors the second RSE screen in the vehicle to this screen. This is
useful if you would like the same content to be watched on both screens. Tap
the Duplicate button to begin mirroring You can also access using the remote
control by pressing then navigating to and selecting the icon.
Settings The Settings button is also located on the right side of the
Navigation Bar. Here you can configure things like connectivity, parental
controls, software updates and more. Tap the Settings button to enter the
settings menu. You can also access using the remote control by pressing to
Navigate the settings.
14
General Operating – Settings
Settings
In Settings you can access General settings, Connectivity settings, Software
updates, and more. Select different categories within settings and make
changes that suit the user. The following information is about the changes
that can be made in settings.
Language
During the Initial setup process, you were able to pick a language that you
would like to appear on your Monitor, you can change the language at any time.
Select Settings, select Language selection, then scroll down until you find
the Language you would like to see on your monitor. NOTE: Some languages do
not translate some words and symbols, in those cases they will show as in
English.
15
General Operating – Settings
Monitor Pairing
Select monitor pairing to pair and watch what is playing on the second
monitor. When selected the system will search for another RSE monitor, once
found the monitor will duplicate the image for shared viewing.
Volume
Volume can be controlled directly by touching the Volume bar and moving left
or right. This will adjust the volume to be louder or quieter.
Brightness
Brightness can directly be controlled by touching the Brightness bar and
moving left or right. This will adjust the volume brighter or dim.
16
General Operating – Settings
Wi-Fi Internet Connection
Selecting Connectivity settings, then select Wi-fi settings, the system will
scan for available Wi-fi connections or Hot spots and give you the best
options. Select the best Wi-fi option. Once the keyboard appears, enter the
password needed and submit. The RSE system will then connect to that wi-fi.
When complete you can highlight the selected Wi-Fi connection and see status,
disconnect, forget, or cancel.
17
General Operating – Settings
Bluetooth
Selecting Bluetooth settings opens the ability to access Remotes, Game
Controllers, and other Bluetooth Devices. Select Bluetooth settings, once
selected the system searches for available Bluetooth devices. Select and pair
with your choice of Bluetooth device. You can also pair with the vehicles
Bluetooth and play audio through the vehicles speaker system. NOTE: make sure
all devices are in their pairing mode.
Software
Select Software update, the current Software version will show to the right.
Select update if a new update is available the system will begin downloading
the new version. You can leave that page and it will download in the
background. The update will complete the next time you turn on the system.
NOTE: Make sure you have a good Wi-fi connection during the download.
Tutorial
This tutorial will walk you through the functionality and Navigation of the
system. Press Next button to begin the Tutorial or press Skip to ignore the
step.
18
General Operating – Settings
APP Download
The Netflix app must be downloaded and installed. The download will require
about 100MB of data. Press “Download and Install Netflix” below to download
and install the app. NOTE: You will be unable to play videos from Netflix
until this app is installed.
Read Back
Read back is an accessibility feature which helps blind and visually impaired
users interact with the system. When enabled, single-pressing or highlighting
any item within the interface will readback the text description for that item
through the system’s audio output. Double pressing or selecting the item using
“OK” on the remote will confirm the selection. Read Back can be toggled on or
off by pressing and holding the Pause button on the remote for 10 seconds.
User Manual
Scanning the QR code will lead you to the most up to date owner’s manual and
copies in other languages.
Restart
Selecting restart will allow you to shut down and restart the monitor. This
could be used in case of a software glitch or a fresh start.
Factory Reset
A Factory reset will clear all your RSE settings and setup information to
factory defaults. This will require you to complete the system setup again and
all passwords and controls.
19
General Operating – Input Streaming
Streaming
Selecting “Streaming” will launch the ScreenHits app, where you can create a
new account or sign-in to an existing account. Once signed in to Screenhits,
you can select the streaming services you subscribe to.
Using Screenhits Menu, discover new content. Use the TV Guide. Use Search to
find a particular movie. Watch Live TV. Try your hand in the Gaming section.
Subscribe or Sign into services like Disney+, Netflix, Kidoodle TV,
Paramount+, Apple TV, and many others.
19
General Operating – Input Streaming
Gaming
Select gaming from the menu. Select many Gaming Favorites like Scorpion
Solitare, Brick Out, Minesweep, Roulette and many more.
Live TV
Choose Live TV for current shows playing from many different TV broadcasts.
Profiles
choose setting from the menu and select “manage your profiles”. You can remove
and create new profiles. the profiles can be based on Male, Female, Kid, or
Unspecified.
Parental Controls
Add a child protection pin to protect the child from using the system.
20
General Operating – Input Streaming
Streaming Search
Using the search bar in the menu, find content that is available within
Screenhits and its services.
Services
Using Services in the menu find new subscriptions. Scroll through the
different services and select. Follow the instructions and setup something
exciting to watch.
21
General Operating – Input USB
USB
Each display is equipped with a USB-C port which can be used to charge your
device or to play non-Digital Rights Management content from a USB storage
device. To Charge, connect your mobile device. To play USB media, connect your
USB storage device and spelaleyecrt.”USB” to paunch the media
22
General Operating – Input USB
23
General Operating – Input HDMI
HDMI
Each display is equipped with a HDMI port which enables the connection of
devices with HDMI output like laptops, tablets, gaming systems, etc… Simply
connect an HDMI cable between the device and select “HDMI” to watch.
24
Compliance Information
FCC ID: Z3K-EVOLVESLS10 IC: 9930A-EVOLVESLS10
FCC Notice This device has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This device generates, uses, and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause unacceptable interference to radio or
television reception, which can be determined by turning the device off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures: · Reorient or relocate the receiving antenna. ·
Increase the separation between the device and receiver. · Connect the device
into an outlet on a circuit different from that to which the receiver is
connected. · Consult your dealer or an experienced radio/TV technician for
help.
FCC Warning: To assure continued FCC compliance, the user must use the
provided grounded power supply cord and the shielded video interface cable
with bonded ferrite cores. Also, any unauthorized change or modifications to
this device would void the user’s authority to operate this device.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
25
ISED Notice:
This Class B digital apparatus complies with Canadian ICES-003.
Cet Appareil numérique de la classe B est conforme à la narme NMB-003 du
Canada.
This device complies with Industry Canada license-exempt RSS standard(s).
Operation is subject to the following two conditions: (1) this device may not
cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux
appareils radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes : (1) l’appareil ne doit pas produire de rouillage, et
(2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le
fonctionnement.
RSS-247 6.4(5) (i) the device for operation in the band 51505250 MHz is only
for indoor use to
reduce thepotential for harmful interference to co-channel mobile satellite
systems; (ii) for devices with detachable antenna(s), the maximum antenna gain
permitted for devicesin the bands 5250-5350 MHz and 5470-5725 MHz shall be
such that the equipment still complies with the e.i.r.p. limit; (iii) for
devices with detachable antenna(s), the maximum antenna gain permitted for
devices inthe band 5725-5850 MHz shall be such that the equipment still
complies with the e.i.r.p. limits specified for point-to-point and non-point-
to-point operation as appropriate; and (iv) the worst-case tilt angle(s)
necessary to remain compliant with the e.i.r.p. elevation maskrequirement set
forth in Section 6.2.2(3) shall be clearly indicated.
(i) l’appareil pour fonctionner dans la bande 5150-5250 MHz est réservé à une
utilisation en intérieur afin de réduire les risques d’interférences nuisibles
à la co-canal systèmes mobilespar satellite;
(ii) pour les appareils avec antenne (s) détachable, le gain d’antenne maximal
autorisé pour les appareils dans les bandes 5250-5350 MHz et 5470-5725 MHz
doit être telle que l’équipementsatisfait encore la pire limite;
(iii) pour les appareils avec antenne (s) détachable, le gain d’antenne
maximal autorisé pour les appareils dans la bande 5725-5850 MHz doit être
telle que l’équipement satisfait encore la pire limites spécifiées pour le
point-à-point et non point-à-point, le cas échéant; opération et
(iv)l’angle d’inclinaison du pire (s) nécessaire pour rester conforme à la
pire exigence de masqued’élévation énoncées dans la section 6.2.2 (3) doit
être clairement indiqué.
This equipment complies with IC RSS-102 radiation exposure limits set forth
for an uncontrolledenvironment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your body. Cet
équipement est conforme aux limites d’exposition aux rayonnements IC RSS-102
définiespour un environnement non contrôlé. Cet équipement doit être installé
et utilisé avec une distance minimale de 20 cm entre le radiateur et votre
corps.
26
Compliance Information
WEEE Notice Disposal of Old Electrical & Electronic Equipment (Applicable in
the European Union and other European countries with separate collection
systems)
This symbol on the product or on its packaging indicates that device shall not
be treated as household waste. Instead, it shall be handed over to the
applicable collection point for the recycling of electrical and electronic
equipment. By ensuring this device is disposed of correctly, you will help
prevent potential negative consequences for the environment and human health,
which could otherwise be caused by inappropriate waste handling of this
device. The recycling of materials will help to conserve natural resources.
For more detailed information about recycling of this device, please contact
your local city office, your household waste disposal service, or the shop
where you purchased the device. Applicable accessory: remote control.
Macrovision Notice This product incorporates copyright protection technology
that is protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovision Corporation and other rights
owners. Use of this copyright protection technology must be authorized by
Macrovision Corporation and is intended for home and other limited viewing
uses only unless otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. And any use of such marks is under license. Other
trademarks and trade names are those of their respective owners.
27
Installation location:
This product is only intended for installation in: 1. Brand Lincoln / Model
Navigator
2. Brand Ford / Model Expedition This product must be installed by
professional technicians. This product needs to be kept at least 20
centimeters away from the human body when using it.
Product Name Model Name (Model No.) Brand Name
Evolve SLS 10 Monitor 620105 JET OPTOELECTRONICS CO., LTD.
©2023 VOXX International Corporation. The company, product and service names
used in this quick start guide are for identification purposes only. All
trademarks and registered trademarks are the property of their respective
owners and are not affiliated with or sponsored by VOXX International
Corporation or its affiliates.
The term HDMI® and the HDMI logo are trademarks or registered trademarks of
HDMI Licensing LLC in the United States and other countries.
28
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>